component
GX122
Public Made by Adomby adom
GXCAS Temperature Sensors, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
GX122
GXCAS · Temperature Sensors · SOT-23-6
GX122 from GXCAS, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ALERT | output | Open-drain alarm output that is active low by default (POL=0) and can be set active high via the POL bit; it requires an external pull-up resistor, with VOL of 0.4 V max at 4 mA sink and leakage of ±1 µA for 0 V ≤ VIN ≤ 6 V. |
| 2 | GND | power_in | Ground reference for the device. |
| 3 | VDD | power_in | Supply pin with an operating range of 2.7 V to 5.5 V, where a 0.1 µF bypass capacitor is recommended. |
| 4 | SO/I | bidirectional | Serial data output/input for the SPI interface, with VOL of 0.4 V max at 3 mA sink and VOH of (V+)-0.4 V min at 2 mA source, and it goes high impedance when CS is released. |
| 5 | /CS | input | Active-low SPI chip select; pulling it low starts a data transfer, and input logic levels are VIH of 0.7(V+) min and VIL of 0.3(V+) max. |
| 6 | SCK | input | SPI serial clock input with a minimum SCK period of 100 ns, and input logic levels of VIH 0.7(V+) min and VIL 0.3(V+) max. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GXCAS |
| Package | SOT-23-6 |
| Category | Sensors |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input temperature range | -55 | 150 | ℃ | 3 | |||
| Temperature accuracy (温度误差) | -0.5 | 0.3 | 0.5 | ℃ | -25℃ to +85℃ | 3 | |
| Temperature accuracy (温度误差) | -1 | 0.5 | 1 | ℃ | -40℃ to +125℃ | 3 | |
| Temperature accuracy (温度误差) | -1 | 1 | ℃ | -55℃ to +150℃ | 3 | ||
| Supply sensitivity (随电源变化) | -0.3 | 0.1 | 0.3 | ℃/V | 3 | ||
| Selectable resolution (分辨率(1) 可选择) | -0.0625 | 0.0625 | ℃ | 3 | |||
| Input current SO/I, SCK, CS (输入电流) | -1 | 1 | µA | 0V ≤ VIN ≤ V+ | 3 | ||
| Output logic low SO/I (输出逻辑 VOL) | VOL | 0.4 | V | ISINK = 3mA | 3 | ||
| Output logic low ALERT (输出逻辑 VOL) | VOL | 0.4 | V | ISINK = 4mA | 3 | ||
| ALERT leakage current (漏电流) | -1 | 1 | µA | 0V ≤ VIN ≤ 6V | 3 | ||
| Input capacitance SO/I, SCK, CS, ALERT (输入电容) | 2.5 | pF | 3 | ||||
| Conversion time 9-Bit + Sign (转换时间) | 30 | 40 | ms | 9-Bit + Sign | 3 | ||
| Conversion time 10-Bit + Sign (转换时间) | 60 | 80 | ms | 10-Bit + Sign | 3 | ||
| Conversion time 11-Bit + Sign (转换时间) | 120 | 160 | ms | 11-Bit + Sign | 3 | ||
| Conversion time 12-Bit + Sign (转换时间) | 240 | 320 | ms | 12-Bit + Sign | 3 | ||
| Operating voltage (操作范围) | 2.7 | 5.5 | V | 3 | |||
| Static current (静态电流) | 50 | 75 | µA | 不通信 | 3 | ||
| Shutdown current (关断电流) | 0.1 | 1 | µA | 不通信 | 3 | ||
| Specified temperature range (指定范围) | -40 | 125 | ℃ | 3 | |||
| Operating temperature range (操作范围) | -55 | 150 | ℃ | 3 | |||
| Storage temperature range (存储范围) | -60 | 150 | ℃ | 3 | |||
| Thermal resistance, SOT23-6 surface-mount (热电阻) | 200 | ℃/W | SOT23-6 Surface-Mount | 3 | |||
| SCK period (SCK 周期) | 100 | ns | 12 | ||||
| Data input setup to SCK rising edge (数据输入上升沿 SCK 建立时间) | 20 | ns | 12 | ||||
| SCK falling edge to output data delay (SCK 下降沿到输出数据延迟) | 30 | ns | 12 | ||||
| SCK rising edge to input data hold (SCK 上升沿到输入数据保持时间) | 20 | ns | 12 | ||||
| CS falling edge to rising SCK setup (CS 到上升沿 SCK 建立时间) | 40 | ns | 12 | ||||
| CS to output data delay (CS 到输出数据延迟) | 30 | ns | 12 | ||||
| CS rising edge to output high impedance (CS 上升沿输出高阻抗) | 30 | ns | 12 |
CAD (KiCad official)
- Symbol:
GX122 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
gx122-etched.step/gx122-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gx122.step/gx122.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GXCAS datasheet (13 pp, sha256
e95f59480b2b72c9, retrieved 2026-10-19, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# GX122
**GXCAS** · Temperature Sensors · SOT-23-6
GX122 from GXCAS, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ALERT | output | Open-drain alarm output that is active low by default (POL=0) and can be set active high via the POL bit; it requires an external pull-up resistor, with VOL of 0.4 V max at 4 mA sink and leakage of ±1 µA for 0 V ≤ VIN ≤ 6 V. |
| 2 | GND | power_in | Ground reference for the device. |
| 3 | VDD | power_in | Supply pin with an operating range of 2.7 V to 5.5 V, where a 0.1 µF bypass capacitor is recommended. |
| 4 | SO/I | bidirectional | Serial data output/input for the SPI interface, with VOL of 0.4 V max at 3 mA sink and VOH of (V+)-0.4 V min at 2 mA source, and it goes high impedance when CS is released. |
| 5 | /CS | input | Active-low SPI chip select; pulling it low starts a data transfer, and input logic levels are VIH of 0.7(V+) min and VIL of 0.3(V+) max. |
| 6 | SCK | input | SPI serial clock input with a minimum SCK period of 100 ns, and input logic levels of VIH 0.7(V+) min and VIL 0.3(V+) max. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GXCAS |
| Package | SOT-23-6 |
| Category | Sensors |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input temperature range | | -55 | | 150 | ℃ | | 3 |
| Temperature accuracy (温度误差) | | -0.5 | 0.3 | 0.5 | ℃ | -25℃ to +85℃ | 3 |
| Temperature accuracy (温度误差) | | -1 | 0.5 | 1 | ℃ | -40℃ to +125℃ | 3 |
| Temperature accuracy (温度误差) | | -1 | | 1 | ℃ | -55℃ to +150℃ | 3 |
| Supply sensitivity (随电源变化) | | -0.3 | 0.1 | 0.3 | ℃/V | | 3 |
| Selectable resolution (分辨率(1) 可选择) | | -0.0625 | | 0.0625 | ℃ | | 3 |
| Input current SO/I, SCK, CS (输入电流) | | -1 | | 1 | µA | 0V ≤ VIN ≤ V+ | 3 |
| Output logic low SO/I (输出逻辑 VOL) | VOL | | | 0.4 | V | ISINK = 3mA | 3 |
| Output logic low ALERT (输出逻辑 VOL) | VOL | | | 0.4 | V | ISINK = 4mA | 3 |
| ALERT leakage current (漏电流) | | -1 | | 1 | µA | 0V ≤ VIN ≤ 6V | 3 |
| Input capacitance SO/I, SCK, CS, ALERT (输入电容) | | | | 2.5 | pF | | 3 |
| Conversion time 9-Bit + Sign (转换时间) | | | 30 | 40 | ms | 9-Bit + Sign | 3 |
| Conversion time 10-Bit + Sign (转换时间) | | | 60 | 80 | ms | 10-Bit + Sign | 3 |
| Conversion time 11-Bit + Sign (转换时间) | | | 120 | 160 | ms | 11-Bit + Sign | 3 |
| Conversion time 12-Bit + Sign (转换时间) | | | 240 | 320 | ms | 12-Bit + Sign | 3 |
| Operating voltage (操作范围) | | 2.7 | | 5.5 | V | | 3 |
| Static current (静态电流) | | | 50 | 75 | µA | 不通信 | 3 |
| Shutdown current (关断电流) | | | 0.1 | 1 | µA | 不通信 | 3 |
| Specified temperature range (指定范围) | | -40 | | 125 | ℃ | | 3 |
| Operating temperature range (操作范围) | | -55 | | 150 | ℃ | | 3 |
| Storage temperature range (存储范围) | | -60 | | 150 | ℃ | | 3 |
| Thermal resistance, SOT23-6 surface-mount (热电阻) | | | | 200 | ℃/W | SOT23-6 Surface-Mount | 3 |
| SCK period (SCK 周期) | | 100 | | | ns | | 12 |
| Data input setup to SCK rising edge (数据输入上升沿 SCK 建立时间) | | 20 | | | ns | | 12 |
| SCK falling edge to output data delay (SCK 下降沿到输出数据延迟) | | | | 30 | ns | | 12 |
| SCK rising edge to input data hold (SCK 上升沿到输入数据保持时间) | | 20 | | | ns | | 12 |
| CS falling edge to rising SCK setup (CS 到上升沿 SCK 建立时间) | | 40 | | | ns | | 12 |
| CS to output data delay (CS 到输出数据延迟) | | | | 30 | ns | | 12 |
| CS rising edge to output high impedance (CS 上升沿输出高阻抗) | | | | 30 | ns | | 12 |
## CAD (KiCad official)
- Symbol: `GX122`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `gx122-etched.step` / `gx122-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `gx122.step` / `gx122.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [GXCAS datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590170016483078144) (13 pp, sha256 `e95f59480b2b72c9`, retrieved 2026-10-19, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/gx122-datasheet.pdf)