GX100S

{
  "slug": "gx100s",
  "version": "0.1.0",
  "type": "component",
  "description": "GXCAS Temperature Sensors, SOT23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensors",
    "gx100s",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "gx100s.kicad_sym",
    "gx100s.kicad_mod",
    "gx100s.glb",
    "gx100s.step",
    "gx100s.lbr",
    "docs/hero.png",
    "docs/gx100s-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "gx100s-hero.glb",
    "gx100s-hero.overlay.json",
    "gx100s-etched.glb"
  ],
  "component": {
    "mpn": "GX100S",
    "manufacturer": "GXCAS",
    "package": "SOT23-6",
    "pin_count": 6,
    "category": "Sensors",
    "subcategory": "Temperature Sensors",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590903774846537728",
    "parts": {
      "symbol": "gx100s.kicad_sym",
      "footprint": "gx100s.kicad_mod",
      "model_3d": "gx100s-hero.glb",
      "model_3d_plain": "gx100s-etched.glb",
      "model_3d_step": "gx100s-etched.step",
      "model_3d_step_plain": "gx100s.step",
      "lbr": "gx100s.lbr"
    },
    "distributor_links": {
      "lcsc": "C5441727"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T12:02:20Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SCL",
        "type": "bidirectional",
        "description": "Serial clock line, open-drain output that requires a pull-up resistor (recommended 5 kΩ, with current on any pin not to exceed 3 mA)."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin."
      },
      {
        "number": "3",
        "name": "ADD1",
        "type": "input",
        "description": "Address select pin, which can be connected to V+, GND, or left floating to set the slave address (GX100 only; this pin is ALERT on the GX101)."
      },
      {
        "number": "4",
        "name": "V+",
        "type": "power_in",
        "description": "Power supply pin, rated 2.7 V to 5.5 V (absolute maximum supply 6 V)."
      },
      {
        "number": "5",
        "name": "ADD0",
        "type": "input",
        "description": "Address select pin, which can be connected to V+, GND, or left floating to set the slave address."
      },
      {
        "number": "6",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Serial data line, open-drain output that requires a pull-up resistor (recommended 5 kΩ, with current on any pin not to exceed 3 mA)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet describes SCL as an open-drain output needing a pull-up, but does not give a KiCad dir; The datasheet specifies ADD0 and ADD1 as address-select pins that can be tied to V+, GND, or left fl; The pin-number table on page 3 gives the GX100 mapping (SCL 1, GND 2, ADD1 3, V+ 4, ADD0 5, SDA 6). "
        ],
        "pages_sent": 17,
        "cost_usd": 0.0678,
        "at": "2026-10-18T11:59:51"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590903774846537728",
        "pages": 17,
        "sha256": "a759c4b2de948d79",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "gx100s.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "gx100s-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b80ebe7448c2a8cc08f1450560bb53ad7b6f623d6d95e53c5a68574a06727c0c",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}