component
GT8071S5
Public Made by Adomby adom
GTIC Operational Amplifier, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
GT8071S5
GTIC · Operational Amplifier · SOT-23-5
GT8071S5 from GTIC, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output, rail-to-rail swing within 30mV of the supply rails with a 1kΩ load. |
| 2 | V- | power_in | Negative (lowest) power supply; single-supply range is 2.5V to 5.5V total across V+ to V-. |
| 3 | +IN | input | Positive (noninverting) input, diode-clamped to the supply rails with a common-mode range of -0.3V to 3.6V at VCC=5V. |
| 4 | -IN | input | Negative (inverting) input, diode-clamped to the supply rails; limit input current to 10mA if the signal swings more than 0.3V beyond the rails. |
| 5 | V+ | power_in | Positive (highest) power supply, 2.5V to 5.5V relative to V- (absolute maximum 6.5V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GTIC |
| Package | SOT-23-5 |
| Category | Operational Amplifier/Comparator |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage | VS | 2.5 | 5.5 | V | FULL | 8 | |
| Quiescent Current (per Amplifier) | IQ | 8.1 | 12 | mA | TA=25°C, VCC=5V, IO=0 (typ); TA=-40°C to +125°C (max) | 8 | |
| Power-Supply Rejection Ratio | PSRR | 70 | 95 | dB | VCC=2.5V to 5.5V, VCM=(V-)+0.5V | 8 | |
| Input Bias Current | IB | 1 | 10 | pA | 5V, +25°C | 8 | |
| Input Offset Current | IOS | 1 | 10 | pA | 5V, +25°C | 8 | |
| Input Offset Voltage | VOS | 2 | 8 | mV | VCC=5V, +25°C | 8 | |
| Input Offset Voltage | VOS | 8.5 | mV | VCC=5V, FULL | 8 | ||
| Input Offset Voltage vs Temperature | dVOS/dT | 4 | μV/°C | VCC=5V, FULL | 8 | ||
| Common-Mode Voltage | VCM | -0.3 | 3.6 | V | VCC=5V, FULL | 8 | |
| Common-Mode Rejection Ratio | CMRR | 70 | 85 | dB | VCC=5.5V, -0.1V < VCM < 3.5V, +25°C | 8 | |
| Open-Loop Gain | AOL | 95 | 105 | dB | VCC=5V, VO=4.8V, RL=1kΩ, FULL | 8 | |
| Open-Loop Gain | AOL | 85 | 95 | dB | VCC=5V, VO=4.7V, RL=150Ω, FULL | 8 | |
| Output Swing From Rail | SWING | 30 | mV | RL=1kΩ, 2.5V to 5.5V, FULL | 9 | ||
| Input Voltage Noise Density | en | 8 | nV/√Hz | f=1MHz | 8 | ||
| Small-Signal Bandwidth | f-3dB | 500 | MHz | At G=+1, VO=100mVPP, RF=25Ω | 9 | ||
| Small-Signal Bandwidth | f-3dB | 230 | MHz | At G=+2, VO=100mVPP, RF=1kΩ | 9 | ||
| Small-Signal Bandwidth | f-3dB | 70 | MHz | At G=+5, VO=100mVPP, RF=4kΩ | 9 | ||
| Small-Signal Bandwidth | f-3dB | 24 | MHz | At G=+10, VO=100 mVPP, RF=9kΩ | 9 | ||
| Slew Rate | SR | 420 | V/μs | VCC=5V, G=+2, 4-V Step Output | 9 | ||
| Output Current Source | IO_SOURCE | 250 | mA | VCC=5V | 9 | ||
| Output Current Sink | IO_SINK | 180 | mA | VCC=5V | 9 | ||
| Supply Voltage | VS | 6.5 | V | VS=(V+) - (V-) | 7 | ||
| Select Input Voltage | -0.5 | 0.5 | V | (V-)-0.5 to (V+)+0.5 | 7 | ||
| Maximum Junction Temperature | -55 | 150 | °C | 7 | |||
| Storage Temperature Range | -55 | 150 | °C | 7 | |||
| ESD HBM | V(ESD) | 5 | kV | Human-Body Model | 7 | ||
| ESD CDM | V(ESD) | 2 | kV | Charged-Device Model | 7 | ||
| Single-Supply Voltage | VCC | 2.5 | 5.5 | V | VS=(V+) - (V-) | 7 | |
| Dual-Supply Voltage | VCC | -1.25 | 1.25 | V | VS=(V+) - (V-), ±1.25 to ±2.75 | 7 | |
| Operating Temperature | TA | -40 | 125 | °C | 7 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 250 | °C/W | SOT23-5 | 7 | ||
| Thermal Resistance Junction-to-Case | θJC | 81 | °C/W | SOT23-5 | 7 |
CAD (KiCad official)
- Symbol:
GT8071S5 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
gt8071s5-etched.step/gt8071s5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gt8071s5.step/gt8071s5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GTIC datasheet (20 pp, sha256
cfa062dbadffebca, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# GT8071S5
**GTIC** · Operational Amplifier · SOT-23-5
GT8071S5 from GTIC, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output, rail-to-rail swing within 30mV of the supply rails with a 1kΩ load. |
| 2 | V- | power_in | Negative (lowest) power supply; single-supply range is 2.5V to 5.5V total across V+ to V-. |
| 3 | +IN | input | Positive (noninverting) input, diode-clamped to the supply rails with a common-mode range of -0.3V to 3.6V at VCC=5V. |
| 4 | -IN | input | Negative (inverting) input, diode-clamped to the supply rails; limit input current to 10mA if the signal swings more than 0.3V beyond the rails. |
| 5 | V+ | power_in | Positive (highest) power supply, 2.5V to 5.5V relative to V- (absolute maximum 6.5V). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GTIC |
| Package | SOT-23-5 |
| Category | Operational Amplifier/Comparator |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage | VS | 2.5 | | 5.5 | V | FULL | 8 |
| Quiescent Current (per Amplifier) | IQ | | 8.1 | 12 | mA | TA=25°C, VCC=5V, IO=0 (typ); TA=-40°C to +125°C (max) | 8 |
| Power-Supply Rejection Ratio | PSRR | 70 | 95 | | dB | VCC=2.5V to 5.5V, VCM=(V-)+0.5V | 8 |
| Input Bias Current | IB | | 1 | 10 | pA | 5V, +25°C | 8 |
| Input Offset Current | IOS | | 1 | 10 | pA | 5V, +25°C | 8 |
| Input Offset Voltage | VOS | | 2 | 8 | mV | VCC=5V, +25°C | 8 |
| Input Offset Voltage | VOS | | | 8.5 | mV | VCC=5V, FULL | 8 |
| Input Offset Voltage vs Temperature | dVOS/dT | | 4 | | μV/°C | VCC=5V, FULL | 8 |
| Common-Mode Voltage | VCM | -0.3 | | 3.6 | V | VCC=5V, FULL | 8 |
| Common-Mode Rejection Ratio | CMRR | 70 | 85 | | dB | VCC=5.5V, -0.1V < VCM < 3.5V, +25°C | 8 |
| Open-Loop Gain | AOL | 95 | 105 | | dB | VCC=5V, VO=4.8V, RL=1kΩ, FULL | 8 |
| Open-Loop Gain | AOL | 85 | 95 | | dB | VCC=5V, VO=4.7V, RL=150Ω, FULL | 8 |
| Output Swing From Rail | SWING | | | 30 | mV | RL=1kΩ, 2.5V to 5.5V, FULL | 9 |
| Input Voltage Noise Density | en | | 8 | | nV/√Hz | f=1MHz | 8 |
| Small-Signal Bandwidth | f-3dB | | 500 | | MHz | At G=+1, VO=100mVPP, RF=25Ω | 9 |
| Small-Signal Bandwidth | f-3dB | | 230 | | MHz | At G=+2, VO=100mVPP, RF=1kΩ | 9 |
| Small-Signal Bandwidth | f-3dB | | 70 | | MHz | At G=+5, VO=100mVPP, RF=4kΩ | 9 |
| Small-Signal Bandwidth | f-3dB | | 24 | | MHz | At G=+10, VO=100 mVPP, RF=9kΩ | 9 |
| Slew Rate | SR | | 420 | | V/μs | VCC=5V, G=+2, 4-V Step Output | 9 |
| Output Current Source | IO_SOURCE | | 250 | | mA | VCC=5V | 9 |
| Output Current Sink | IO_SINK | | 180 | | mA | VCC=5V | 9 |
| Supply Voltage | VS | | | 6.5 | V | VS=(V+) - (V-) | 7 |
| Select Input Voltage | | -0.5 | | 0.5 | V | (V-)-0.5 to (V+)+0.5 | 7 |
| Maximum Junction Temperature | | -55 | | 150 | °C | | 7 |
| Storage Temperature Range | | -55 | | 150 | °C | | 7 |
| ESD HBM | V(ESD) | | | 5 | kV | Human-Body Model | 7 |
| ESD CDM | V(ESD) | | | 2 | kV | Charged-Device Model | 7 |
| Single-Supply Voltage | VCC | 2.5 | | 5.5 | V | VS=(V+) - (V-) | 7 |
| Dual-Supply Voltage | VCC | -1.25 | | 1.25 | V | VS=(V+) - (V-), ±1.25 to ±2.75 | 7 |
| Operating Temperature | TA | -40 | | 125 | °C | | 7 |
| Thermal Resistance Junction-to-Ambient | θJA | | 250 | | °C/W | SOT23-5 | 7 |
| Thermal Resistance Junction-to-Case | θJC | | 81 | | °C/W | SOT23-5 | 7 |
## CAD (KiCad official)
- Symbol: `GT8071S5`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `gt8071s5-etched.step` / `gt8071s5-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `gt8071s5.step` / `gt8071s5.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [GTIC datasheet](docs/gt8071s5-datasheet.pdf) (20 pp, sha256 `cfa062dbadffebca`, retrieved 2026-10-22, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/gt8071s5-datasheet.pdf)