component
GT712LBDTR-30A
Public Made by Adomby adom
XBLW Current Sensors, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownGT712LBDTR-30A
XBLW · Current Sensors · SOP-8
GT712LBDTR-30A from XBLW, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Positive current input terminal; carries primary AC/DC current under measurement (transient surge rating 100 A for IP1pulse100ms). |
| 2 | IP+ | passive | Positive current input terminal; second conductor pin paralleled with pin 1 to carry primary current through the Hall-effect sensing loop. |
| 3 | IP- | passive | Negative current input terminal; carries return primary current out of the Hall-effect sensor conductor. |
| 4 | IP- | passive | Negative current input terminal; second conductor pin paralleled with pin 3 for the primary current return path. |
| 5 | GND | power_in | Ground and programming pin; signal ground reference for the internal Hall circuit and EEPROM programming interface. |
| 6 | TEST | unconnected | Factory testing / floating pin; used for production test only and must be left unconnected in normal application. |
| 7 | OUT | output | Analog signal output and programming pin; ratiometric voltage output proportional to measured current, quiescent point VOQ = 2.500 V typ (VCC = 5 V, no current), output swing 0.5 V to VCC−0.3 V into RL ≥ 4.7 kΩ. |
| 8 | VCC | power_in | Power supply and programming pin; operating range 4.5 V to 5.5 V, supply current 9 mA typ / 13 mA max at TA = 25 °C no load. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XBLW |
| Package | SOP-8 |
| Category | Magnetic Sensors |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
GT712LBDTR-30A - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
gt712lbdtr-30a-etched.step/gt712lbdtr-30a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gt712lbdtr-30a.step/gt712lbdtr-30a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XBLW datasheet (15 pp, sha256
c862e9914fbb78be, retrieved 2026-09-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-sonnet-4-6(vision), consensusclaude-opus-4-7(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).