← Commit history
page.json+8−5@@ -38,7 +38,7 @@ "number": "1", "name": "IP+", "type": "passive",- "description": "Positive current input terminal; one of two parallel conductors carrying the measured current through the Hall sensor (\u00b15 A full-scale for -05B variant, 100 A transient pulse per IP1pulse100ms rating)."+ "description": "Positive current input terminal; one of two parallel conductors carrying the measured current through the Hall sensor (±5 A full-scale for -05B variant, 100 A transient pulse per IP1pulse100ms rating)." }, { "number": "2",@@ -74,13 +74,13 @@ "number": "7", "name": "OUT", "type": "output",- "description": "Signal Output / Programming Pin; analog voltage output proportional to measured current (sensitivity 185 mV/A for -05B, quiescent output 2.500 V typ at VCC=5 V, VOUT max = VCC\u22120.5 V, output source 80 mA max, sink 40 mA max); also used for EEPROM programming."+ "description": "Signal Output / Programming Pin; analog voltage output proportional to measured current (sensitivity 185 mV/A for -05B, quiescent output 2.500 V typ at VCC=5 V, VOUT max = VCC−0.5 V, output source 80 mA max, sink 40 mA max); also used for EEPROM programming." }, { "number": "8", "name": "VCC", "type": "power_in",- "description": "Power Supply / Programming Pin; operating voltage 4.5 V-5.5 V (typ 5 V), max 6 V; operating current 9-13 mA (typ 11.18 mA at TA=25 \u00b0C, no load); also used for EEPROM programming."+ "description": "Power Supply / Programming Pin; operating voltage 4.5 V-5.5 V (typ 5 V), max 6 V; operating current 9-13 mA (typ 11.18 mA at TA=25 °C, no load); also used for EEPROM programming." } ], "provenance": {@@ -94,7 +94,7 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Pins 6 (TEST) is described as 'Factory Testing/Floating' \u2014 the datasheet gives no further electrical; Pins 5 (GND) and 8 (VCC) are also used as programming pins for the internal EEPROM. No external prog",+ "extractor flagged: Pins 6 (TEST) is described as 'Factory Testing/Floating' — the datasheet gives no further electrical; Pins 5 (GND) and 8 (VCC) are also used as programming pins for the internal EEPROM. No external prog", "vision extraction: provenance cannot be text-verified; needs consensus" ], "pages_sent": 12,@@ -161,5 +161,8 @@ "docs/gt712lbdtr-05b-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }