component
GT712LBDTR-05B
Public Made by Adomby adom
XBLW Current Sensors, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownGT712LBDTR-05B
XBLW · Current Sensors · SOP-8
GT712LBDTR-05B from XBLW, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Positive current input terminal; one of two parallel conductors carrying the measured current through the Hall sensor (±5 A full-scale for -05B variant, 100 A transient pulse per IP1pulse100ms rating). |
| 2 | IP+ | passive | Positive current input terminal; second parallel conductor of the current path, connected internally to pin 1. |
| 3 | IP- | passive | Negative current input terminal; one of two parallel conductors returning the measured current from the Hall sensor. |
| 4 | IP- | passive | Negative current input terminal; second parallel return conductor, connected internally to pin 3. |
| 5 | GND | power_in | Ground / Programming Pin; signal ground reference for the IC and EEPROM programming (max 200 programming cycles). |
| 6 | TEST | unconnected | Factory Testing / Floating pin; used for factory test only; must be left unconnected in application. |
| 7 | OUT | output | Signal Output / Programming Pin; analog voltage output proportional to measured current (sensitivity 185 mV/A for -05B, quiescent output 2.500 V typ at VCC=5 V, VOUT max = VCC−0.5 V, output source 80 mA max, sink 40 mA max); also used for EEPROM programming. |
| 8 | VCC | power_in | Power Supply / Programming Pin; operating voltage 4.5 V-5.5 V (typ 5 V), max 6 V; operating current 9-13 mA (typ 11.18 mA at TA=25 °C, no load); also used for EEPROM programming. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XBLW |
| Package | SOP-8 |
| Category | Magnetic Sensors |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
GT712LBDTR-05B - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
gt712lbdtr-05b-etched.step/gt712lbdtr-05b-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gt712lbdtr-05b.step/gt712lbdtr-05b.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XBLW datasheet (15 pp, sha256
c862e9914fbb78be, retrieved 2026-09-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-sonnet-4-6(vision), consensusclaude-opus-4-7(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).