← Commit history

gt712lbdtr-05b: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·89528d3b31 · ·parent a578d49
2 files changed +88−8
package.json+46−6
@@ -53,7 +53,7 @@         "number": "1",         "name": "IP+",         "type": "passive",-        "description": "Positive current input terminal; one of two parallel conductors carrying the measured current through the Hall sensor (\u00b15 A full-scale for -05B variant, 100 A transient pulse per IP1pulse100ms rating)."+        "description": "Positive current input terminal; one of two parallel conductors carrying the measured current through the Hall sensor (±5 A full-scale for -05B variant, 100 A transient pulse per IP1pulse100ms rating)."       },       {         "number": "2",@@ -89,13 +89,13 @@         "number": "7",         "name": "OUT",         "type": "output",-        "description": "Signal Output / Programming Pin; analog voltage output proportional to measured current (sensitivity 185 mV/A for -05B, quiescent output 2.500 V typ at VCC=5 V, VOUT max = VCC\u22120.5 V, output source 80 mA max, sink 40 mA max); also used for EEPROM programming."+        "description": "Signal Output / Programming Pin; analog voltage output proportional to measured current (sensitivity 185 mV/A for -05B, quiescent output 2.500 V typ at VCC=5 V, VOUT max = VCC−0.5 V, output source 80 mA max, sink 40 mA max); also used for EEPROM programming."       },       {         "number": "8",         "name": "VCC",         "type": "power_in",-        "description": "Power Supply / Programming Pin; operating voltage 4.5 V-5.5 V (typ 5 V), max 6 V; operating current 9-13 mA (typ 11.18 mA at TA=25 \u00b0C, no load); also used for EEPROM programming."+        "description": "Power Supply / Programming Pin; operating voltage 4.5 V-5.5 V (typ 5 V), max 6 V; operating current 9-13 mA (typ 11.18 mA at TA=25 °C, no load); also used for EEPROM programming."       }     ],     "provenance": {@@ -109,7 +109,7 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pins 6 (TEST) is described as 'Factory Testing/Floating' \u2014 the datasheet gives no further electrical; Pins 5 (GND) and 8 (VCC) are also used as programming pins for the internal EEPROM. No external prog",+          "extractor flagged: Pins 6 (TEST) is described as 'Factory Testing/Floating' — the datasheet gives no further electrical; Pins 5 (GND) and 8 (VCC) are also used as programming pins for the internal EEPROM. No external prog",           "vision extraction: provenance cannot be text-verified; needs consensus"         ],         "pages_sent": 12,@@ -133,6 +133,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "gt712lbdtr-05b.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "gt712lbdtr-05b-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "8649ac9c5886deda49de398307c3b92e7f55478c8a3bd5d2db56cb27a37cb28c",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -118,7 +118,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "gt712lbdtr-05b.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "gt712lbdtr-05b-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "8649ac9c5886deda49de398307c3b92e7f55478c8a3bd5d2db56cb27a37cb28c",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -166,4 +206,4 @@     "public": true   },   "updated_at": "2026-09-24T21:21:28.400Z"-}\ No newline at end of file+}