main
Ray
gs8358-sr: specified limits as data (metadata.characteristics, 40 rows from the datasheet)
6b7c01b
GS8358-SR
Gainsil · Operational Amplifier · SOP-8
GS8358-SR from Gainsil, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Channel A op-amp output. Rail-to-rail output swing; typically within 3mV of supply rails with RL=100kΩ and 8mV with RL=10kΩ. Output source/sink current is approximately 84mA/75mA typical. |
| 2 | INA- | input | Channel A inverting input. Rail-to-rail input range (VSS-0.1V to VDD+0.1V). Very low input bias current of 1pA typical. |
| 3 | INA+ | input | Channel A non-inverting input. Rail-to-rail input range (VSS-0.1V to VDD+0.1V). Very low input bias current of 1pA typical. |
| 4 | VSS | power_in | Negative supply / ground pin. For single-supply operation connect to GND; for dual supplies connect to the negative rail (±1.05V to ±2.75V). Bypass with 0.1µF ceramic capacitor to ground for dual-supply operation. |
| 5 | INB+ | input | Channel B non-inverting input. Rail-to-rail input range (VSS-0.1V to VDD+0.1V). Very low input bias current of 1pA typical. |
| 6 | INB- | input | Channel B inverting input. Rail-to-rail input range (VSS-0.1V to VDD+0.1V). Very low input bias current of 1pA typical. |
| 7 | OUTB | output | Channel B op-amp output. Rail-to-rail output swing; typically within 3mV of supply rails with RL=100kΩ and 8mV with RL=10kΩ. Output source/sink current is approximately 84mA/75mA typical. |
| 8 | VDD | power_in | Positive supply pin. Operating range 2.1V to 5.5V (single-supply) or ±1.05V to ±2.75V (dual-supply). Bypass with a 0.1µF ceramic capacitor close to the pin. Quiescent current is 40µA per amplifier (typ). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Gainsil |
| Package | SOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
GS8358-SRGS8358-SRMR
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (Channel A), +25℃ | VOS | -3.5 | 0.4 | 3.5 | mV | VCM = VS/2, Channel A, +25℃ | 3 |
| Input Offset Voltage (Channel A), over temperature | VOS | -5.6 | 5.6 | mV | VCM = VS/2, Channel A, -40℃ to +85℃ | 3 | |
| Common-Mode Rejection Ratio, +25℃ | CMRR | 62 | 70 | dB | VS = 5.5V, VCM = -0.1V to 4V, +25℃ | 3 | |
| Common-Mode Rejection Ratio, over temperature | CMRR | 62 | dB | VS = 5.5V, VCM = -0.1V to 4V, -40℃ to +85℃ | 3 | ||
| Common-Mode Rejection Ratio, +25℃ | CMRR | 56 | 68 | dB | VS = 5.5V, VCM = -0.1V to 5.6V, +25℃ | 3 | |
| Common-Mode Rejection Ratio, over temperature | CMRR | 55 | dB | VS = 5.5V, VCM = -0.1V to 5.6V, -40℃ to +85℃ | 3 | ||
| Open-Loop Voltage Gain, +25℃ | AOL | 70 | 80 | dB | RL = 5kΩ, VO = +0.1V to +4.9V, +25℃ | 3 | |
| Open-Loop Voltage Gain, over temperature | AOL | 70 | dB | RL = 5kΩ, VO = +0.1V to +4.9V, -40℃ to +85℃ | 3 | ||
| Open-Loop Voltage Gain, +25℃ | AOL | 94 | 100 | dB | RL = 10kΩ, VO = +0.1V to +4.9V, +25℃ | 3 | |
| Open-Loop Voltage Gain, over temperature | AOL | 85 | dB | RL = 10kΩ, VO = +0.1V to +4.9V, -40℃ to +85℃ | 3 | ||
| Output Voltage Swing High, +25℃ | VOH | 4.99 | 4.997 | V | RL = 100kΩ, +25℃ | 3 | |
| Output Voltage Swing High, over temperature | VOH | 4.98 | V | RL = 100kΩ, -40℃ to +85℃ | 3 | ||
| Output Voltage Swing Low, +25℃ | VOL | 3 | 10 | mV | RL = 100kΩ, +25℃ | 3 | |
| Output Voltage Swing Low, over temperature | VOL | 20 | mV | RL = 100kΩ, -40℃ to +85℃ | 3 | ||
| Output Voltage Swing High, +25℃ | VOH | 4.97 | 4.992 | V | RL = 10kΩ, +25℃ | 3 | |
| Output Voltage Swing High, over temperature | VOH | 4.96 | V | RL = 10kΩ, -40℃ to +85℃ | 3 | ||
| Output Voltage Swing Low, +25℃ | VOL | 8 | 30 | mV | RL = 10kΩ, +25℃ | 3 | |
| Output Voltage Swing Low, over temperature | VOL | 40 | mV | RL = 10kΩ, -40℃ to +85℃ | 3 | ||
| Output Current Source, +25℃ | ISOURCE | 60 | 84 | mA | RL = 10Ω to VS/2, +25℃ | 3 | |
| Output Current Source, over temperature | ISOURCE | 45 | mA | RL = 10Ω to VS/2, -40℃ to +85℃ | 3 | ||
| Output Current Sink, +25℃ | ISINK | 60 | 75 | mA | +25℃ | 3 | |
| Output Current Sink, over temperature | ISINK | 45 | mA | -40℃ to +85℃ | 3 | ||
| Operating Voltage Range, minimum, +25℃ | 2.1 | V | +25℃ | 3 | |||
| Operating Voltage Range, minimum, over temperature | 2.5 | V | -40℃ to +85℃ | 3 | |||
| Operating Voltage Range, maximum, +25℃ | 5.5 | V | +25℃ | 3 | |||
| Operating Voltage Range, maximum, over temperature | 5.5 | V | -40℃ to +85℃ | 3 | |||
| Power Supply Rejection Ratio, +25℃ | PSRR | 60 | 82 | dB | VS = +2.5V to +5.5V, VCM = +0.5V, +25℃ | 3 | |
| Power Supply Rejection Ratio, over temperature | PSRR | 58 | dB | VS = +2.5V to +5.5V, VCM = +0.5V, -40℃ to +85℃ | 3 | ||
| Quiescent Current per Amplifier, +25℃ | IQ | 40 | 60 | µA | +25℃ | 3 | |
| Quiescent Current per Amplifier, over temperature | IQ | 80 | µA | -40℃ to +85℃ | 3 | ||
| Power Supply Voltage (VDD to Vss) | -0.5 | 7.5 | V | 2 | |||
| PDB Input Voltage | 7 | V | 2 | ||||
| Operating Temperature Range | -40 | 125 | °C | 2 | |||
| Junction Temperature | 160 | °C | 2 | ||||
| Storage Temperature Range | -55 | 150 | °C | 2 | |||
| Lead Temperature | 260 | °C | soldering, 10sec | 2 | |||
| ESD Susceptibility HBM | 6 | KV | HBM | 2 | |||
| ESD Susceptibility MM | 300 | V | MM | 2 | |||
| Operating Supply Voltage (single supply) | 2.1 | 5.5 | V | single supply | 6 | ||
| Package Thermal Resistance, junction-to-ambient (SOP-8) | θJA | 125 | °C/W | TA=+25℃, SOP-8 | 2 |
CAD (KiCad official)
- Symbol:
GS8358-SR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
gs8358-sr-etched.step/gs8358-sr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gs8358-sr.step/gs8358-sr.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
gs8358-sr.step |
122 KB | You want the bare part, or you mark your own boards. |
gs8358-sr-etched.step |
2.6 MB | You want the part with GS8358-SR already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 603 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Gainsil datasheet (11 pp, sha256
7b7237a774f249b3, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# GS8358-SR
**Gainsil** · Operational Amplifier · SOP-8
GS8358-SR from Gainsil, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Channel A op-amp output. Rail-to-rail output swing; typically within 3mV of supply rails with RL=100kΩ and 8mV with RL=10kΩ. Output source/sink current is approximately 84mA/75mA typical. |
| 2 | INA- | input | Channel A inverting input. Rail-to-rail input range (VSS-0.1V to VDD+0.1V). Very low input bias current of 1pA typical. |
| 3 | INA+ | input | Channel A non-inverting input. Rail-to-rail input range (VSS-0.1V to VDD+0.1V). Very low input bias current of 1pA typical. |
| 4 | VSS | power_in | Negative supply / ground pin. For single-supply operation connect to GND; for dual supplies connect to the negative rail (±1.05V to ±2.75V). Bypass with 0.1µF ceramic capacitor to ground for dual-supply operation. |
| 5 | INB+ | input | Channel B non-inverting input. Rail-to-rail input range (VSS-0.1V to VDD+0.1V). Very low input bias current of 1pA typical. |
| 6 | INB- | input | Channel B inverting input. Rail-to-rail input range (VSS-0.1V to VDD+0.1V). Very low input bias current of 1pA typical. |
| 7 | OUTB | output | Channel B op-amp output. Rail-to-rail output swing; typically within 3mV of supply rails with RL=100kΩ and 8mV with RL=10kΩ. Output source/sink current is approximately 84mA/75mA typical. |
| 8 | VDD | power_in | Positive supply pin. Operating range 2.1V to 5.5V (single-supply) or ±1.05V to ±2.75V (dual-supply). Bypass with a 0.1µF ceramic capacitor close to the pin. Quiescent current is 40µA per amplifier (typ). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Gainsil |
| Package | SOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `GS8358-SR`
- `GS8358-SRMR`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (Channel A), +25℃ | VOS | -3.5 | 0.4 | 3.5 | mV | VCM = VS/2, Channel A, +25℃ | 3 |
| Input Offset Voltage (Channel A), over temperature | VOS | -5.6 | | 5.6 | mV | VCM = VS/2, Channel A, -40℃ to +85℃ | 3 |
| Common-Mode Rejection Ratio, +25℃ | CMRR | 62 | 70 | | dB | VS = 5.5V, VCM = -0.1V to 4V, +25℃ | 3 |
| Common-Mode Rejection Ratio, over temperature | CMRR | 62 | | | dB | VS = 5.5V, VCM = -0.1V to 4V, -40℃ to +85℃ | 3 |
| Common-Mode Rejection Ratio, +25℃ | CMRR | 56 | 68 | | dB | VS = 5.5V, VCM = -0.1V to 5.6V, +25℃ | 3 |
| Common-Mode Rejection Ratio, over temperature | CMRR | 55 | | | dB | VS = 5.5V, VCM = -0.1V to 5.6V, -40℃ to +85℃ | 3 |
| Open-Loop Voltage Gain, +25℃ | AOL | 70 | 80 | | dB | RL = 5kΩ, VO = +0.1V to +4.9V, +25℃ | 3 |
| Open-Loop Voltage Gain, over temperature | AOL | 70 | | | dB | RL = 5kΩ, VO = +0.1V to +4.9V, -40℃ to +85℃ | 3 |
| Open-Loop Voltage Gain, +25℃ | AOL | 94 | 100 | | dB | RL = 10kΩ, VO = +0.1V to +4.9V, +25℃ | 3 |
| Open-Loop Voltage Gain, over temperature | AOL | 85 | | | dB | RL = 10kΩ, VO = +0.1V to +4.9V, -40℃ to +85℃ | 3 |
| Output Voltage Swing High, +25℃ | VOH | 4.99 | 4.997 | | V | RL = 100kΩ, +25℃ | 3 |
| Output Voltage Swing High, over temperature | VOH | 4.98 | | | V | RL = 100kΩ, -40℃ to +85℃ | 3 |
| Output Voltage Swing Low, +25℃ | VOL | | 3 | 10 | mV | RL = 100kΩ, +25℃ | 3 |
| Output Voltage Swing Low, over temperature | VOL | | | 20 | mV | RL = 100kΩ, -40℃ to +85℃ | 3 |
| Output Voltage Swing High, +25℃ | VOH | 4.97 | 4.992 | | V | RL = 10kΩ, +25℃ | 3 |
| Output Voltage Swing High, over temperature | VOH | 4.96 | | | V | RL = 10kΩ, -40℃ to +85℃ | 3 |
| Output Voltage Swing Low, +25℃ | VOL | | 8 | 30 | mV | RL = 10kΩ, +25℃ | 3 |
| Output Voltage Swing Low, over temperature | VOL | | | 40 | mV | RL = 10kΩ, -40℃ to +85℃ | 3 |
| Output Current Source, +25℃ | ISOURCE | 60 | 84 | | mA | RL = 10Ω to VS/2, +25℃ | 3 |
| Output Current Source, over temperature | ISOURCE | 45 | | | mA | RL = 10Ω to VS/2, -40℃ to +85℃ | 3 |
| Output Current Sink, +25℃ | ISINK | 60 | 75 | | mA | +25℃ | 3 |
| Output Current Sink, over temperature | ISINK | 45 | | | mA | -40℃ to +85℃ | 3 |
| Operating Voltage Range, minimum, +25℃ | | 2.1 | | | V | +25℃ | 3 |
| Operating Voltage Range, minimum, over temperature | | 2.5 | | | V | -40℃ to +85℃ | 3 |
| Operating Voltage Range, maximum, +25℃ | | | | 5.5 | V | +25℃ | 3 |
| Operating Voltage Range, maximum, over temperature | | | | 5.5 | V | -40℃ to +85℃ | 3 |
| Power Supply Rejection Ratio, +25℃ | PSRR | 60 | 82 | | dB | VS = +2.5V to +5.5V, VCM = +0.5V, +25℃ | 3 |
| Power Supply Rejection Ratio, over temperature | PSRR | 58 | | | dB | VS = +2.5V to +5.5V, VCM = +0.5V, -40℃ to +85℃ | 3 |
| Quiescent Current per Amplifier, +25℃ | IQ | | 40 | 60 | µA | +25℃ | 3 |
| Quiescent Current per Amplifier, over temperature | IQ | | | 80 | µA | -40℃ to +85℃ | 3 |
| Power Supply Voltage (VDD to Vss) | | -0.5 | | 7.5 | V | | 2 |
| PDB Input Voltage | | | | 7 | V | | 2 |
| Operating Temperature Range | | -40 | | 125 | °C | | 2 |
| Junction Temperature | | | | 160 | °C | | 2 |
| Storage Temperature Range | | -55 | | 150 | °C | | 2 |
| Lead Temperature | | | | 260 | °C | soldering, 10sec | 2 |
| ESD Susceptibility HBM | | | | 6 | KV | HBM | 2 |
| ESD Susceptibility MM | | | | 300 | V | MM | 2 |
| Operating Supply Voltage (single supply) | | 2.1 | | 5.5 | V | single supply | 6 |
| Package Thermal Resistance, junction-to-ambient (SOP-8) | θJA | | 125 | | °C/W | TA=+25℃, SOP-8 | 2 |
## CAD (KiCad official)
- Symbol: `GS8358-SR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `gs8358-sr-etched.step` / `gs8358-sr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `gs8358-sr.step` / `gs8358-sr.glb` are the bare package body.
## 3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
| [`gs8358-sr.step`](gs8358-sr.step) | 122 KB | You want the bare part, or you mark your own boards. |
| [`gs8358-sr-etched.step`](gs8358-sr-etched.step) | 2.6 MB | You want the part with `GS8358-SR` already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a
texture or a decal: 603 faces against 147 in the bare model. It
survives export, section views, and rendering in any CAD tool, and it drops straight
into KiCad or Fusion with no extra setup.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Gainsil datasheet](docs/gs8358-sr-datasheet.pdf) (11 pp, sha256 `7b7237a774f249b3`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/gs8358-sr-datasheet.pdf)