component

GS8332-MR

Public Made by Adom

by adom

Gainsil Precision OpAmps, MSOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentop-amp-cmpgs8332-mr
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
gs8332-mr / README.md
History Download
Ray gs8332-mr: specified limits as data (metadata.characteristics, 33 rows from the datasheet) 295e333

GS8332-MR

Gainsil · Precision OpAmps · MSOP-8

GS8332-MR from Gainsil, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTA output Amplifier A output. Rail-to-rail push-pull output; swings within ~5 mV of the supply rails into 100 kohm and within ~20 mV into 10 kohm. Short-circuit limited to ~20 mA typ (15 mA min) source/sink.
2 INA- input Amplifier A inverting input. High-impedance CMOS input with rail-to-rail common-mode range (Vss-0.1 V to Vdd+0.1 V). Typical input bias current 20 pA.
3 INA+ input Amplifier A non-inverting input. High-impedance CMOS input with rail-to-rail common-mode range (Vss-0.1 V to Vdd+0.1 V). Typical input bias current 20 pA.
4 VSS power_in Negative supply / ground. Single-supply operation ties this to GND; dual-supply operation ties this to the negative rail. Bypass with 0.1 uF close to the pin in dual-supply designs. Absolute maximum Vdd-Vss = 7.5 V.
5 INB+ input Amplifier B non-inverting input. High-impedance CMOS input with rail-to-rail common-mode range (Vss-0.1 V to Vdd+0.1 V). Typical input bias current 20 pA.
6 INB- input Amplifier B inverting input. High-impedance CMOS input with rail-to-rail common-mode range (Vss-0.1 V to Vdd+0.1 V). Typical input bias current 20 pA.
7 OUTB output Amplifier B output. Rail-to-rail push-pull output; swings within ~5 mV of the supply rails into 100 kohm and within ~20 mV into 10 kohm. Short-circuit limited to ~20 mA typ (15 mA min) source/sink.
8 VDD power_in Positive supply. Single-supply range +1.8 V to +5.5 V (dual-supply +/-0.9 V to +/-2.75 V). Bypass with a 0.1 uF ceramic close to the pin. Absolute maximum Vdd-Vss = 7.5 V.

Key specifications

Parameter Value
Manufacturer Gainsil
Package MSOP-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • GS8332-MR
  • GS8332-SR
  • GS8331-TR
  • GS8331-CR
  • GS8334-SR
  • GS8334-TR

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS 2 10 µV T=25℃ 3
Input Offset Voltage VOS 15 µV -45℃<T<125℃ 3
Input Bias Current IB 20 200 pA 3
Input Bias Current IB 2000 pA -45℃<T<125℃ 3
Input Offset Current IOS 10 200 pA T=25℃ 3
Input Offset Current IOS 2000 pA -45℃<T<125℃ 3
Common-Mode Rejection Ratio CMRR 100 110 dB VCM = 0V to 5V, T=25℃ 3
Common-Mode Rejection Ratio CMRR 90 dB VCM = 0V to 5V, -45℃<T<125℃ 3
Large Signal Voltage Gain AVO 120 145 dB VO = 0.3V to 4.7V, T=25℃ 3
Large Signal Voltage Gain AVO 110 dB VO = 0.3V to 4.7V, -45℃<T<125℃ 3
Input Offset Voltage Drift ΔVOS/ΔT 10 50 nV/℃ -45℃<T<125℃ 3
Output Voltage High VOH 4.998 V RL = 100kΩ to - VS 3
Output Voltage High VOH 4.994 V RL = 10kΩ to - VS 3
Output Voltage Low VOL 5 mV RL = 100kΩ to + VS 3
Output Voltage Low VOL 20 mV RL = 10kΩ to + VS 3
Short Circuit Limit (Isource) ISC 15 20 mA RL =10Ω to - VS, T=25℃ 3
Short Circuit Limit (Isource) ISC 14 mA RL =10Ω to - VS, -45℃<T<125℃ 3
Short Circuit Limit (Isink) ISC 15 20 mA RL =10Ω to - VS, T=25℃ 3
Short Circuit Limit (Isink) ISC 14 mA RL =10Ω to - VS, -45℃<T<125℃ 3
Power Supply Rejection Ratio PSRR 110 115 dB VS = 2.5V to 5.5V, T=25℃ 3
Power Supply Rejection Ratio PSRR 100 dB VS = 2.5V to 5.5V, -45℃<T<125℃ 3
Quiescent Current IQ 25 40 µA VO = 0V, T=25℃ 3
Quiescent Current IQ 50 µA VO = 0V, -45℃<T<125℃ 3
Power Supply Voltage (VDD to Vss) VDD -0.5 7.5 V VDD to Vss 2
PDB Input Voltage 7 V 2
Operating Temperature Range -45 125 °C 2
Junction Temperature 160 °C 2
Storage Temperature Range -55 150 °C 2
Lead Temperature 260 °C soldering, 10sec 2
Package Thermal Resistance MSOP-8 θJA 216 °C/W TA=+25℃ 2
ESD Susceptibility HBM 6 KV HBM 2
ESD Susceptibility MM 400 V MM 2
Supply Voltage (single supply) VDD 1.8 5.5 V Single supply, from Features 1

CAD (KiCad official)

  • Symbol: GS8332-MR
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: gs8332-mr-etched.step / gs8332-mr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gs8332-mr.step / gs8332-mr.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
gs8332-mr.step 123 KB You want the bare part, or you mark your own boards.
gs8332-mr-etched.step 2.4 MB You want the part with GS8332-MR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 563 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Gainsil datasheet (15 pp, sha256 118070d5dc462cce, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF