main
History Download
Ray gs8044-tr: specified limits as data (metadata.characteristics, 17 rows from the datasheet) 85bb10c

GS8044-TR

Gainsil · Operational Amplifier · TSSOP-14

GS8044-TR from Gainsil, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTA output Amplifier A output. Rail-to-rail output swing, typically within ~50 mV of the supply rails driving light loads (>50 kΩ); source/sink up to ~20 mA.
2 INA- input Amplifier A inverting input. Rail-to-rail input; common-mode range VSS-0.1 V to VDD+0.1 V. Input bias current 1 pA typ.
3 INA+ input Amplifier A non-inverting input. Rail-to-rail input; common-mode range VSS-0.1 V to VDD+0.1 V.
4 VDD power_in Positive supply voltage, +1.4 V to +5.5 V (single-supply), or +0.7 V to +2.75 V (dual). Bypass with 0.1 μF ceramic close to the pin. Absolute maximum VDD-to-VSS is +7.5 V.
5 INB+ input Amplifier B non-inverting input. Rail-to-rail input; common-mode range VSS-0.1 V to VDD+0.1 V.
6 INB- input Amplifier B inverting input. Rail-to-rail input; input bias current 1 pA typ.
7 OUTB output Amplifier B output. Rail-to-rail; source/sink up to ~20 mA into 10 Ω to VS/2.
8 OUTC output Amplifier C output. Rail-to-rail output swing.
9 INC- input Amplifier C inverting input. Rail-to-rail input; input bias current 1 pA typ.
10 INC+ input Amplifier C non-inverting input. Rail-to-rail input.
11 VSS power_in Negative supply / ground reference. Tie to 0 V in single-supply operation; bypass with 0.1 μF in dual-supply operation.
12 IND+ input Amplifier D non-inverting input. Rail-to-rail input; common-mode range VSS-0.1 V to VDD+0.1 V.
13 IND- input Amplifier D inverting input. Rail-to-rail input; input bias current 1 pA typ.
14 OUTD output Amplifier D output. Rail-to-rail output swing.

Key specifications

Parameter Value
Manufacturer Gainsil
Package TSSOP-14
Category Op-amp/Cmp
Pins 14

Ordering variants

Same part, different packaging or reel option.

  • GS8044-TR
  • GS8044-SR

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS 0.4 3 mV VCM = VS/2 4
Common-Mode Voltage Range VCM -0.1 5.6 V VS = 5.5V 4
Common-Mode Rejection Ratio CMRR 66 78 dB VS = 5V, VCM = -0.1V to 2.5V 4
Common-Mode Rejection Ratio CMRR 67 84 dB VS = 5V, VCM = -0.1V to 5.1V 4
Open-Loop Voltage Gain AOL 75 86 dB Vs=1.4V, RL = 50kΩ, VO = Vs-0.1V 4
Open-Loop Voltage Gain AOL 84 93 dB Vs=5V, RL = 50kΩ, VO = Vs-0.1V 4
Output Voltage Swing from Rail (high) VOH 1.39 1.395 V Vs=1.4V, RL = 50kΩ 4
Output Voltage Swing from Rail (low) VOL 4.5 10 mV Vs=1.4V, RL = 50kΩ 4
Output Voltage Swing from Rail (high) VOH 4.99 4.997 V Vs=5V, RL = 50kΩ 4
Output Voltage Swing from Rail (low) VOL 3.5 10 mV Vs=5V, RL = 50kΩ 4
Operating Voltage Range 1.4 5.5 V 4
Power Supply Rejection Ratio PSRR 77 80 dB VS = +1.4V to +5.5V, VCM = +0.5V 4
Power Supply Voltage (VDD to Vss) -0.5 7.5 V 2
Operating Temperature Range -40 125 °C 2
Junction Temperature 160 °C 2
Storage Temperature Range -55 150 °C 2
Lead Temperature 260 °C soldering, 10sec 2

CAD (KiCad official)

  • Symbol: GS8044-TR
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: gs8044-tr-etched.step / gs8044-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gs8044-tr.step / gs8044-tr.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
gs8044-tr.step 194 KB You want the bare part, or you mark your own boards.
gs8044-tr-etched.step 2.3 MB You want the part with GS8044-TR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 583 faces against 237 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Gainsil datasheet (18 pp, sha256 cee5ca709c38c648, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF