main
Ray
gs8042-sr: laser-etched CAD + chip hero (factory 2.0.0 backfill)
98e511a
GS8042-SR
Gainsil · Operational Amplifier · SOP-8
GS8042-SR from Gainsil, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Amplifier A output. Rail-to-rail output stage; can swing to within ~50mV of either supply rail into light resistive loads (>50kΩ) and source/sink up to 20mA into a 10Ω load to VS/2. |
| 2 | INA- | input | Amplifier A inverting input. High-impedance CMOS input (1pA typ bias current). Input common-mode range extends from VSS-0.1V to VDD+0.1V. |
| 3 | INA+ | input | Amplifier A non-inverting input. High-impedance CMOS input (1pA typ bias current). Input common-mode range extends from VSS-0.1V to VDD+0.1V. |
| 4 | VSS | power_in | Negative supply / ground. In single-supply operation tie to GND; in dual-supply operation tie to the negative rail (down to -2.75V). Absolute max VDD-VSS = 7.5V. |
| 5 | INB+ | input | Amplifier B non-inverting input. High-impedance CMOS input (1pA typ bias current). Input common-mode range extends from VSS-0.1V to VDD+0.1V. |
| 6 | INB- | input | Amplifier B inverting input. High-impedance CMOS input (1pA typ bias current). Input common-mode range extends from VSS-0.1V to VDD+0.1V. |
| 7 | OUTB | output | Amplifier B output. Rail-to-rail output stage; can swing to within ~50mV of either supply rail into light resistive loads (>50kΩ) and source/sink up to 20mA into a 10Ω load to VS/2. |
| 8 | VDD | power_in | Positive supply. Operating range 1.4V to 5.5V (absolute max 7.5V VDD-VSS). Bypass with a 0.1µF ceramic capacitor placed close to the pin. Quiescent current is 600nA/amplifier typ. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Gainsil |
| Package | SOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
GS8042-SRSRGS8042-SRMR
CAD (KiCad official)
- Symbol:
GS8042-SR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
gs8042-sr-etched.step/gs8042-sr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gs8042-sr.step/gs8042-sr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Gainsil datasheet (None pp, sha256
2cfbf0f89a315340, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# GS8042-SR
**Gainsil** · Operational Amplifier · SOP-8
GS8042-SR from Gainsil, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Amplifier A output. Rail-to-rail output stage; can swing to within ~50mV of either supply rail into light resistive loads (>50kΩ) and source/sink up to 20mA into a 10Ω load to VS/2. |
| 2 | INA- | input | Amplifier A inverting input. High-impedance CMOS input (1pA typ bias current). Input common-mode range extends from VSS-0.1V to VDD+0.1V. |
| 3 | INA+ | input | Amplifier A non-inverting input. High-impedance CMOS input (1pA typ bias current). Input common-mode range extends from VSS-0.1V to VDD+0.1V. |
| 4 | VSS | power_in | Negative supply / ground. In single-supply operation tie to GND; in dual-supply operation tie to the negative rail (down to -2.75V). Absolute max VDD-VSS = 7.5V. |
| 5 | INB+ | input | Amplifier B non-inverting input. High-impedance CMOS input (1pA typ bias current). Input common-mode range extends from VSS-0.1V to VDD+0.1V. |
| 6 | INB- | input | Amplifier B inverting input. High-impedance CMOS input (1pA typ bias current). Input common-mode range extends from VSS-0.1V to VDD+0.1V. |
| 7 | OUTB | output | Amplifier B output. Rail-to-rail output stage; can swing to within ~50mV of either supply rail into light resistive loads (>50kΩ) and source/sink up to 20mA into a 10Ω load to VS/2. |
| 8 | VDD | power_in | Positive supply. Operating range 1.4V to 5.5V (absolute max 7.5V VDD-VSS). Bypass with a 0.1µF ceramic capacitor placed close to the pin. Quiescent current is 600nA/amplifier typ. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Gainsil |
| Package | SOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
## Ordering variants
- `GS8042-SRSR`
- `GS8042-SRMR`
## CAD (KiCad official)
- Symbol: `GS8042-SR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `gs8042-sr-etched.step` / `gs8042-sr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `gs8042-sr.step` / `gs8042-sr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Gainsil datasheet](docs/gs8042-sr-datasheet.pdf) (None pp, sha256 `2cfbf0f89a315340`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/gs8042-sr-datasheet.pdf)