main
History Download
Ray gs7253-aso-r: specified limits as data (metadata.characteristics, 46 rows from the datasheet) a4db9e1

GS7253-ASO-R

GSTEK Green Solution Technology · DC-DC Controllers · SOIC-8-EP

GS7253-ASO-R from GSTEK Green Solution Technology, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BOOT output Bootstrap supply for the high-side gate driver. An external capacitor from PHASE to BOOT, together with the internal diode and VCC, generates the bootstrap voltage for the UGATE driver. Absolute max V_BOOT-GND = 36 V; V_BOOT-PHASE = 18 V.
2 UGATE output High-side gate driver output for the external N-channel MOSFET. Pull-up ~3.5 Ω, pull-down ~1.9 Ω at BOOT-PHASE=12V. Voltage range: -0.3V to V_BOOT+0.3V.
3 OCSET input Over-current setting pin. Connecting a resistor (R_OCSET) between OCSET and GND sets the over-current trip point. Sources ~20 uA (18-22 uA); OCP threshold VPHASE1 = -250 mV at V_OCSET=1.0V. Absolute max -0.3 to 6 V.
4 LGATE output Low-side gate driver output for the external N-channel MOSFET. Pull-up ~3.8 Ω, pull-down ~1.8 Ω at V_CC=12V. Voltage range: -0.3V to V_CC+0.3V.
5 VCC power_in Power supply input for control circuitry. Connect a well-decoupled 5V/12V supply; place a decoupling capacitor near the IC. Recommended 4.5-13.2 V; POR threshold ~4.2 V; absolute max 18 V.
6 FB input Feedback input to the converter. Connect a resistor divider from V_OUT to set the output voltage; internal reference V_FB = 0.6 V (±1%). UVP trip at 0.3 V (0.5×V_REF), OVP at 0.75 V (1.25×V_REF).
7 COMP/EN output Error amplifier output and enable input. Used with FB for loop compensation of the voltage-mode converter. Pulling this pin below ~0.3 V (enable threshold 0.3-0.35 V) disables the controller.
8 PHASE input Switch node. Connect to the source of the upper MOSFET and drain of the lower MOSFET. Serves as sink for the UGATE driver and monitors V_DS across the lower MOSFET for over-current protection. Rated -0.3 to 18 V (>200 ns) / -2 to 28 V (<200 ns).
9 GND power_in Signal and power ground (exposed thermal pad). Connect to system ground. Also provides thermal dissipation path; θ_JA = 75 °C/W.

Key specifications

Parameter Value
Manufacturer GSTEK Green Solution Technology
Package SOIC-8-EP
Category Power Supply Chip
Pins 9

Ordering variants

Same part, different packaging or reel option.

  • GS7253-ASO-R

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN to GND VIN 3 13.2 V 5
VCC to GND VCC 4.5 13.2 V 5
Junction Temperature TJ -40 125 °C 5
Ambient Temperature TA -40 85 °C 5
VCC to GND VSUPPLY -0.3 18 V 4
BOOT Voltage VBOOT-GND -0.3 36 V 4
BOOT to PHASE Voltage VBOOT-PHASE -0.3 18 V 4
UGATE to PHASE Voltage VGU -0.3 V 4
LGATE to GND Voltage VGL -0.3 V 4
PHASE to GND VPHASE -0.3 18 V >200ns 4
PHASE to GND VPHASE -2 28 V <200ns 4
FB, COMP, OCSET to GND -0.3 6 V 4
Package Power Dissipation PD_PSOP-8 1333 mW TA≦25°C 4
Junction Temperature TJ -45 150 °C 4
Storage Temperature TSTG -55 150 °C 4
Lead Temperature (Soldering) TLEAD 260 °C 10S 4
ESD (Machine Mode) VESD_MM 200 V Machine Mode 4
Supply Voltage VCC 4.5 13.2 V 5
Supply Current ICC 3.8 mA UGATE,LGATE Open; VCC=12V,Switching 5
Quiescent Supply Current ICC-Q 2 mA VFB=0.7V,NO Switching 5
Power Input Voltage VIN 3 13.2 V 5
POR Threshold 4 4.2 4.4 V 5
Free Running Frequency fOSC 270 300 330 KHz GS7253-A 5
Nominal Feedback Voltage VFB 0.594 0.6 0.606 V Internal Reference Mode 5
Dead Time TDL TDL 30 90 ns VCC=12;VPHASE<1.2V to VLGATE>1.2V 6
Dead Time TDH TDH 30 90 ns VCC=12;VLGATE<1.2V to (VUGATE-VPHASE)>1.2V 6
Under Voltage Protection VFB-UVP 0.27 0.3 0.33 V VREF=0.6V 6
Over Voltage Protection VFB-OVP 0.72 0.75 0.78 V VREF=0.6V 6
OCSET Current Source IOC_SET 18 20 22 uA VOCSET=1.0 6
Enable Threshold VCOMP/EN 0.3 0.35 V GS7253-A 6
Internal Boot Diode Forward Voltage VF 0.2 0.4 0.6 V VCC to BOOT, IF=10mA 6
Thermal Resistance Junction to Ambient θJA_PSOP-8 75 °C/W Note 3: natural convection at TA=25°C 5
POR Hysteresis 0.5 V 5
Ramp Amplitude ΔVOSC 1.8 VP_P Guaranteed by Design 5
Open Loop DC Gain A0 88 dB Guaranteed by Design 5
Gain-Bandwidth Product GBW 10 MHz Guaranteed by Design 5
Slew Rate SR 10 V/us Guaranteed by Design 5
UGATE Driver Pull Up RU_UP 3.5 ohms BOOT-PHASE=12V, UGATE=High, IUGATE=-100mA 6
UGATE Driver Pull Down RU_DN 1.9 ohms BOOT-PHASE=12V, UGATE=Low, IUGATE =100mA 6
LGATE Driver Pull Up RL_UP 3.8 ohms VCC=12V, LGATE= High, ILGATE=-100mA 6
LGATE Driver Pull Down RL_SINK 1.8 ohms VCC=12V, LGATE=Low, ILGATE =100mA 6
Over Voltage Protection Delay VFB-OVP-DL 20 us VREF=0.6V 6
OCP Threshold VPHASE1 -250 mV VOCSET=1.0,GS7253-A 6
Soft-Start Interval TSS 2 mS Internal Reference Mode 6
Thermal Shutdown Temperature TTSDN 151 °C 6
Thermal Shutdown Hysteresis THYS_TSDN 15 °C 6

CAD (KiCad official)

  • Symbol: GS7253-ASO-R
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: SOIC-8-EP (KiCad packages3D, STEP)
  • 3D model files: gs7253-aso-r-etched.step / gs7253-aso-r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gs7253-aso-r.step / gs7253-aso-r.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: GSTEK Green Solution Technology datasheet (16 pp, sha256 2d86855cc8b33a11, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF