component

GS6002-SR

Public Made by Adom

by adom

Gainsil Operational Amplifier, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentop-amp-cmpgs6002-sr
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs gs6002-sr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 2d ago
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
gs6002-sr-etched.fit.json gs6002-sr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 2d ago
gs6002-sr-etched.glb gs6002-sr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 2d ago
gs6002-sr-etched.step gs6002-sr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 2d ago
gs6002-sr.glb Publish 0.1.0 · Ray 1mo ago
gs6002-sr.kicad_mod Publish 0.1.0 · Ray 1mo ago
gs6002-sr.kicad_sym Publish 0.1.0 · Ray 1mo ago
gs6002-sr.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect and oval pad as a SQUARE EAGLE smd; this carries the real pad shape across (0 -> 8 rounded pads) and stops dropping geometry drawn on KiCad User.N layers. Attributes, connects, pads and the pin-1 marker are gated against decreasing and are unchanged. · Ray 1mo ago
gs6002-sr.step Publish 0.1.0 · Ray 1mo ago
package.json Publish 0.2.0 · Ray 1mo ago
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
page.json Brief states the pinout check that actually ran (was an unconditional "Datasheet-verified pinout") · Ray 11d ago
README.md gs6002-sr: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray 17d ago

GS6002-SR

Gainsil · Operational Amplifier · SOP-8

GS6002-SR from Gainsil, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTA output Amplifier A output. Rail-to-rail output swing, can source ~84mA and sink ~75mA (typ) into a 10Ω load to VS/2.
2 INA- input Amplifier A inverting input. Rail-to-rail input, allowed range VSS-0.1V to VDD+0.1V. Typical input bias current 1pA.
3 INA+ input Amplifier A non-inverting input. Rail-to-rail input, allowed range VSS-0.1V to VDD+0.1V. Typical input bias current 1pA.
4 VSS power_in Negative supply / ground. Single-supply operation ties this to GND; dual-supply operation uses ±0.9V to ±3V. Bypass with a 0.1µF ceramic capacitor close to the pin in dual-supply mode. Absolute max VDD-VSS = 7.5V.
5 INB+ input Amplifier B non-inverting input. Rail-to-rail input, allowed range VSS-0.1V to VDD+0.1V. Typical input bias current 1pA.
6 INB- input Amplifier B inverting input. Rail-to-rail input, allowed range VSS-0.1V to VDD+0.1V. Typical input bias current 1pA.
7 OUTB output Amplifier B output. Rail-to-rail output swing, can source ~84mA and sink ~75mA (typ) into a 10Ω load to VS/2.
8 VDD power_in Positive supply. Single-supply operating range 1.8V to 6V. Bypass with a 0.1µF ceramic capacitor close to the pin. Absolute max VDD-VSS = 7.5V.

Key specifications

Parameter Value
Manufacturer Gainsil
Package SOP-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • GS6002-SR
  • GS6002-MR

CAD (KiCad official)

  • Symbol: GS6002-SR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: gs6002-sr-etched.step / gs6002-sr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gs6002-sr.step / gs6002-sr.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
gs6002-sr.step 122 KB You want the bare part, or you mark your own boards.
gs6002-sr-etched.step 2.4 MB You want the part with GS6002-SR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 566 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Gainsil datasheet (15 pp, sha256 ed68bc9a48151394, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF