Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

GS2301-33TR5

Gainsil · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

GS2301-33TR5 from Gainsil, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VIN power_in Input supply pin, recommended operating range 2.5V to 6.5V (absolute maximum 8V), with a 1μF input capacitor recommended.
2 GND power_in Ground pin for the regulator.
3 EN input Enable input, logic high of 1.2V to VIN turns the output on and logic low of 0.4V maximum shuts it down (shutdown current 0.1μA typ).
4 NC unconnected No connection pin, not internally connected.
5 VOUT power_out Regulated output (3.3V for the -33 version, 2% accuracy) delivering up to 300mA, with a 1μF output capacitor recommended.

Key specifications

Parameter Value
Manufacturer Gainsil
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Accuracy VOUT -2 2 % IOUT = 1mA 3
Input Voltage VIN 6.5 V 3
Quiescent Current IQ 1 2 µA VOUT = 3.3V, IOUT = 0V 3
Shutdown Current ISHDN 0.1 1 µA VEN = 0V 3
EN Logic High Voltage VENH 1.2 V VIN = 5.5V, IOUT = 1mA 3
EN Logic Low Voltage VENL 0.4 V VIN = 5.5V, VOUT = 0V 3
EN Input Current IEN 1 µA VEN = 0 to 5.5V 3
Current Limit ILIMIT 350 mA VIN - VOUT = 0.5V 3
Dropout Voltage VDROP 0.18 V VOUT = 3.3V, IOUT = 100mA 3
Dropout Voltage VDROP 0.36 V VOUT = 3.3V, IOUT = 200mA 3
Line Regulation ΔVLINE 0.01 %/V VIN = 2.7~5.5V, IOUT = 1mA 3
Load Regulation ΔVLOAD 100 mV VOUT = 3.3V, IOUT = 1~300mA 3
Short Current ISHORT 70 mA VEN = VIN, VOUT Short to GND with 1Ω 3
Supply Voltage VIN 2.5 6.5 V 3
Operating Temperature TOPT -40 85 °C 3
Input Voltage VIN -0.3 8 V 3
Output Current IOUT 350 mA 3
Power Dissipation PDMAX 0.6 W 3
Junction Temperature TJ -40 125 °C 3
Ambient Temperature TA -40 85 °C 3
Storage Temperature TSTG -55 150 °C 3
Package Lead Soldering Temperature TSOLDER 260 °C 10s 3
Thermal Resistance RθJA 250 °C/W 3

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: GS2301-33TR5
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.92 mm, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: gs2301-33tr5-etched.step / gs2301-33tr5-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gs2301-33tr5.step / gs2301-33tr5.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Gainsil datasheet (8 pp, sha256 9c5391a7005a008a, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF