component
GS2262C-SR
Public Made by Adomby adom
Gainsil Operational Amplifier, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownGS2262C-SR
Gainsil · Operational Amplifier · SOP-8
GS2262C-SR from Gainsil, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Channel A amplifier output, rail-to-rail swing with typical 39mA source and 35mA sink current at VS=30V. |
| 2 | INA- | input | Channel A inverting input; input voltage must stay within Vss-0.5V to VDD+0.5V. |
| 3 | INA+ | input | Channel A non-inverting input; common-mode range 0 to (VS-1.5V) at VS=30V and absolute maximum input Vss-0.5V to VDD+0.5V. |
| 4 | VSS | power_in | Negative supply (ground) pin; input common-mode range extends to this rail. |
| 5 | INB+ | input | Channel B non-inverting input; input voltage must stay within Vss-0.5V to VDD+0.5V. |
| 6 | INB- | input | Channel B inverting input; input voltage must stay within Vss-0.5V to VDD+0.5V. |
| 7 | OUTB | output | Channel B amplifier output, rail-to-rail swing with typical 39mA source and 35mA sink current at VS=30V. |
| 8 | VDD | power_in | Positive supply pin, operating range 3.3V to 36V (absolute maximum 40V between VDD and Vss). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Gainsil |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage (VDD to Vss) | -0.5 | 40 | V | 2 | |||
| PDB Input Voltage | 40 | V | 2 | ||||
| Operating Temperature Range | -40 | 125 | °C | 2 | |||
| Storage Temperature Range | -55 | 150 | °C | 2 | |||
| Junction Temperature | 160 | °C | 2 | ||||
| Lead Temperature (soldering) | 260 | °C | soldering, 10sec | 2 | |||
| ESD Susceptibility HBM | 2 | KV | HBM | 2 | |||
| ESD Susceptibility MM | 300 | V | MM | 2 | |||
| Input Offset Voltage | VOS | -1 | 0.1 | 1 | mV | VCM = VS/2 | 3 |
| Common-Mode Voltage Range | VCM | 0 | V | VS =30V; upper limit printed as VS -1.5V | 3 | ||
| Common-Mode Rejection Ratio | CMRR | 100 | 120 | dB | VS = 30V, VCM = 0V to 28.5V | 3 | |
| Open-Loop Voltage Gain | AOL | 100 | 130 | dB | Vs=30V, RL = 10kΩ, VCM = 0V to 28.5V | 3 | |
| Output Voltage Swing from Rail VOH | VOH | 29.65 | 29.85 | V | Vs=30V, RL = 10kΩ | 3 | |
| Output Voltage Swing from Rail VOL | VOL | 100 | 300 | mV | Vs=30V, RL = 10kΩ | 3 | |
| Output Voltage Swing from Rail VOH | VOH | 28 | 29.25 | V | Vs=30V, RL = 2kΩ | 3 | |
| Output Voltage Swing from Rail VOL | VOL | 500 | 1500 | mV | Vs=30V, RL = 2kΩ | 3 | |
| Operating Voltage Range | 3.3 | 36 | V | 3 | |||
| Power Supply Rejection Ratio | PSRR | 100 | 120 | dB | VS = +3.3V to +30V, VCM = +0.5V | 3 | |
| Input Bias Current | IB | 100 | pA | 3 | |||
| Input Offset Current | IOS | 25 | pA | 3 | |||
| Input Offset Voltage Drift | ΔVOS/ΔT | 2 | μV/℃ | 3 | |||
| Output Current ISOURCE | ISOURCE | 39 | mA | Vs=30V | 3 | ||
| Output Current ISINK | ISINK | 35 | mA | Vs=30V | 3 | ||
| Quiescent Current / Amplifier | IQ | 2.7 | mA | 3 | |||
| Gain-Bandwidth Product | GBP | 11 | MHz | 3 | |||
| Slew Rate | SR | 23 | V/μs | G = +1, 5V Output Step | 3 | ||
| Input Voltage Noise enp-p | enp-p | 3 | μVRMS | f = 0.1Hz to 10Hz | 3 | ||
| Input Voltage Noise en | en | 34 | nV/√Hz | f = 1kHz | 3 | ||
| Input Voltage Noise en | en | 13 | nV/√Hz | f = 10kHz | 3 | ||
| Package Thermal Resistance SOP-8 | θJA | 125 | °C/W | TA=+25℃ | 2 |
CAD (KiCad official)
- Symbol:
GS2262C-SR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
gs2262c-sr-etched.step/gs2262c-sr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gs2262c-sr.step/gs2262c-sr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Gainsil datasheet (9 pp, sha256
9b423c972db7aaba, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).