GRM155R71H472KA01D

Murata GRM155R71H472KA01D: MLCC 4.7 nF +/-10 %, 50 V, X7R, 0402 (1005 metric).

Key specifications

All page numbers refer to the PDF in docs/ unless stated otherwise.

Datasheet pages cited

Crops of the reference sheet pages the tables above cite, rendered at 150 dpi from the PDF in docs/.

p.2 header: part number, size, characteristic, capacitance, voltage and the 'as of' date

p.2 'Type & Dimension' and 'Rated Value'

p.2 'Package': packaging codes and reel quantities

p.3 'Specifications and Test Methods' items 1 to 7 (IR, capacitance, Q or DF)

p.27 '2. Land Dimensions', Tables 1 and 2

Notes

• X7R capacitance falls with applied DC voltage and with age; check Murata's DC-bias data (SimSurfing or the product page's characteristics data) at your working voltage.

Ordering

Stock figures are a snapshot from the Adom parts search on 2026-10-21; check the distributor before ordering.

Manufacturer and resources

Pins

A capacitor of this kind has no polarity and no pin 1 orientation: either terminal may face either way.

Land pattern: KiCad footprint vs Murata

Land pattern

The footprint is KiCad's standard `C_0402_1005Metric`, and this guide lays its pads over the land pattern recommended by Murata, at true scale. The KiCad pads are a little larger than the maker asks for, and the guide shows by how much. Use it to decide whether to keep the KiCad pads or shrink them to the maker's numbers before layout. The comparison, with the numbers

3D model

Murata publishes no STEP for this exact part number that can be fetched over plain HTTP: its public product-data API lists the reference sheet, S-parameters, a SPICE netlist and characteristics data for this part, but no 3D CAD file (checked 2026-10-21). The page therefore uses KiCad's library model for the package, C_0402_1005Metric.step, with its bytes unchanged, renamed GRM155R71H472KA01D.step. It was checked against Murata's printed L, W, T and e limits before use (next section). package-reference.glb is the same model converted with step2glb convert, with nothing added. The Murata reference sheet specifies no part marking: none of its 33 pages has a marking section, and the p.2 dimension sketch shows a plain body (searched: GRM155R71H472KA01-01A, all 33 pages searched; p.2), so the model shows a plain body and carries no added part-number etch.

The page viewer shows grm155r71h472ka01d-hero.glb: the clean model plus nonphysical reference artwork drawn under it to the adom-hero 1.4 standard (adom/component-hero): the footprint's pads as teal dashed outlines at 50 % opacity, its silkscreen at 70 % transparency and the pad numbers 1 and 2 (the terminals have no names). The part is non-polar, so no pin-1 dot is added. The artwork never goes into the STEP, package-reference.glb or the board LODs.

Model checked against the datasheet

The model was rendered in orthographic top, bottom, side and end views at true scale and laid over a drawing made at the same scale from the printed table (nominal outline, tolerance limits, allowed terminal band). Every dimension is inside the printed range: L 1.000 mm (datasheet 0.95 to 1.05), W 0.500 mm (datasheet 0.45 to 0.55), T/H 0.500 mm (datasheet 0.45 to 0.55), e (terminal band), top 0.200 mm (datasheet 0.15 to 0.35), e (terminal band), bottom 0.200 mm (datasheet 0.15 to 0.35). The model is Z-up, seated on z = 0, centred on the footprint origin, long axis on X.

Source: Murata reference sheet GRM155R71H472KA01-01A, specifications as of Jun. 19, 2026, p.2 'Type & Dimension', size code 1005M(0402): L 1.0 +/-0.05, W 0.5 +/-0.05, T 0.5 +/-0.05, e 0.15 to 0.35, g 0.3 min (mm).

Board levels of detail

Clean board-use GLBs (no footprint pads, outlines, labels or silkscreen; no marking) in four levels, all in the same Z-up, metre, footprint-origin pose as the STEP. Previews are rendered from each GLB.

CAD files

Sources and license

• Murata: Murata reference sheet GRM155R71H472KA01-01A, specifications as of Jun. 19, 2026 (https://search.murata.co.jp/Ceramy/image/img/A01X/G101/ENG/GRM155R71H472KA01-01A.pdf)
• KiCad libraries: Capacitor_SMD.pretty/C_0402_1005Metric.kicad_mod, Capacitor_SMD.3dshapes/C_0402_1005Metric.step
• Murata product data: https://pim.murata.com/en-us/pim/details/?partNum=GRM155R71H472KA01%23 (public API pimapi.murata.com, queried 2026-10-21)
• Distributor numbers: Mouser, DigiKey and JLCPCB/LCSC through the Adom parts search, 2026-10-21

Original Adom content is CC-BY-4.0. The KiCad footprint and 3D files keep their upstream license (CC-BY-SA 4.0 with the KiCad library exception) and the PDFs remain the publishers' documents; see LICENSE. provenance.json records every source and file hash; the scripts that built the checks are in provenance/tools/.

This is a catalog record for the part, not a manufacturing approval: check the maker's current datasheet for your design.