main
History Download
Ray gr9230rkkag: laser-etched CAD + chip hero (factory 2.0.0 backfill) e9cef12

GR9230RKKAG

Grenergy · AC-DC Controllers & Regulators · SOP-7

GR9230RKKAG from Grenergy, in a SOP-7. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in IC power supply pin. UVLO-ON ≈16.0 V, UVLO-OFF ≈7.5 V, VCC OVP ≈28 V, max 30 V. Bypass with a 2.2-10 µF electrolytic plus a 0.1-0.47 µF SMD ceramic capacitor placed close to the pin.
2 COMP input Voltage feedback / compensation pin. A photocoupler connected here sinks current to control the primary-side duty cycle. Open-loop voltage ~5.2 V, short-circuit current ~230 µA, green-mode threshold ~1.35 V. Bypass with a 1-33 nF capacitor to GND.
3 QRD input Quasi-resonant (valley) detection and OVP sense pin. Driven from an auxiliary winding through a divider; internal clamps at +4.6 V / -0.3 V, QRD-OVP trip ≈3.5 V (128 µs debounce), UVP level 0.5 V (8 ms de-bounce after start-up). Requires a 4.7-33 pF filter capacitor to GND.
4 CS input Current-sense input from the source-side sense resistor. Peak-current threshold VCSmax ≈0.85 V (low line) / 0.7 V (high line), OCP comparator reference 0.85 V, leading-edge blanking 350 ns, input impedance 1 MΩ, delay-to-output 100 ns.
5 DRAIN power_in Drain of the internal 650 V high-voltage power MOSFET. Pin 5 is tied internally to the same DRAIN node as pin 6 for improved current handling and heat spreading. Connects to the transformer primary winding.
6 DRAIN power_in Drain of the internal 650 V high-voltage power MOSFET (paralleled with pin 5). Connects to the transformer primary winding.
7 GND power_in Ground reference pin for the controller and the source of the internal high-voltage MOSFET. All bypass capacitors and the CS-sense resistor return here.

Key specifications

Parameter Value
Manufacturer Grenergy
Package SOP-7
Category Power Supply Chip
Pins 7

Ordering variants

Same part, different packaging or reel option.

  • GR9230RKKAG
  • GR9230RKKAGKAL
  • GR9230RKKAGJG
  • GR9230RKKAGJL

CAD (KiCad official)

  • Symbol: GR9230RKKAG
  • Footprint: Package_SO:SOIC-8-N7_3.9x4.9mm_P1.27mm
  • 3D model: SOP-7 (KiCad packages3D, STEP)
  • 3D model files: gr9230rkkag-etched.step / gr9230rkkag-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gr9230rkkag.step / gr9230rkkag.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Grenergy datasheet (15 pp, sha256 5e0cbcbc1935cb14, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF