main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs gr8323njg: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers gr8323njg: viewers · Ray
gr8323njg-etched.fit.json gr8323njg: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
gr8323njg-etched.glb gr8323njg: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
gr8323njg-etched.step gr8323njg: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
gr8323njg.glb Publish 0.1.0 · Ray
gr8323njg.kicad_mod Publish 0.1.0 · Ray
gr8323njg.kicad_sym Publish 0.1.0 · Ray
gr8323njg.lbr Publish 0.1.0 · Ray
gr8323njg.step Publish 0.1.0 · Ray
package.json gr8323njg: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json gr8323njg: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/gr8323njg · Ray

GR8323NJG

Grenergy · Battery Management ICs · DIP-16

GR8323NJG from Grenergy, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PGI input Power good input pin with threshold voltage 1.16-1.33V and hysteresis ±20 to ±80 mV.
2 GND power_in Ground connection.
3 FPO/ output Fault protection output pin, open drain output; low-level output voltage 0.35V at 10mA sink current.
4 PSON/ input ON/OFF control input pin; high-level threshold 1.4-1.5V, low-level threshold 1.0-1.1V; de-bounce time 24-61 ms.
5 IS12A input 12V over current protection sense input for rail A; current sink ratio to Iref 7.6-8.4.
6 RI input Reference current setting adjust input; constant current Iref 12.5-62.5 µA typical 20 µA.
7 IS12B input 12V over current protection sense input for rail B; current sink ratio to Iref 7.6-8.4.
8 VS12B input 12V over/under voltage sense input for rail B; over-voltage threshold 13.1-14.5V, under-voltage threshold 8.5-9.5V.
9 OTP input Over temperature protection input pin; threshold voltage 2.4-2.6V with hysteresis −0.26V.
10 IS5 input 5V over current protection sense input; current sink ratio to Iref 7.6-8.4.
11 IS33 input 3.3V over current protection sense input; current sink ratio to Iref 7.6-8.4.
12 VS12A input 12V over/under voltage sense input for rail A; over-voltage threshold 13.1-14.5V, under-voltage threshold 8.5-9.5V.
13 VS33 input 3.3V over/under voltage sense input; over-voltage threshold 3.7-4.1V, under-voltage threshold 2.0-2.4V.
14 VS5 input 5V over/under voltage sense input; over-voltage threshold 5.7-6.5V, under-voltage threshold 3.3-3.7V.
15 VCC power_in Power supply input; operating voltage range 5-15V; supply current 1 mA typical.
16 PGO output Power good output signal pin, open drain output; low-level output voltage 0.35V at 10mA sink current.

Key specifications

Parameter Value
Manufacturer Grenergy
Package DIP-16
Category Power Supply Chip
Pins 16

CAD (KiCad official)

  • Symbol: GR8323NJG
  • Footprint: Package_DIP:DIP-16_W7.62mm
  • 3D model: DIP-16 (KiCad packages3D, STEP)
  • 3D model files: gr8323njg-etched.step / gr8323njg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gr8323njg.step / gr8323njg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Grenergy datasheet (12 pp, sha256 76cd15d53f773740, retrieved 2026-09-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF