main
Ray
gr1230rcg: laser-etched CAD + chip hero (factory 2.0.0 backfill)
02abb8e
GR1230RCG
Grenergy · AC-DC Controllers & Regulators · SOT-26
GR1230RCG from Grenergy, in a SOT-26. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin for the controller. |
| 2 | COMP | input | Voltage feedback pin. A photo-coupler is connected here to control the duty cycle. Open-loop voltage ~5.2V; OLP trip level ~4.35V; requires a paralleling capacitor of 1-33 nF for noise filtering. |
| 3 | QRD | input | Quasi-resonant detection and OVP input. Upper clamp ~4.6V (IZCD=0.5mA), lower clamp ~-0.3V (IZCD=0.3mA); OVP threshold ~3.5V, UVP threshold ~0.5V. |
| 4 | CS | input | Current sense pin, connected to the external sense resistor for sensing the primary MOSFET current signal. Vcsmax(ON Time>4us) ~0.85V; internal slope compensation ~0.3V; leading-edge blanking ~350 ns. |
| 5 | VCC | power_in | Power supply pin. Recommended supply 9.5-26.5V; UVLO-ON ~16V, UVLO-OFF ~7.5V; internal VCC OVP ~28V. Requires a 2.2-10 µF bulk capacitor plus a small (0.1-0.47 µF) SMD ceramic capacitor close to the pin. |
| 6 | OUT | output | Gate driver output for the external primary MOSFET. Output low ≤1V @ 20mA; internal VGATE clamp ~13.5V (VCC=17V); typical rise/fall time 330/45 ns into 1nF load. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Grenergy |
| Package | SOT-26 |
| Category | Power Supply Chip |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
GR1230RCG
CAD (KiCad official)
- Symbol:
GR1230RCG - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-26 (KiCad packages3D, STEP)
- 3D model files:
gr1230rcg-etched.step/gr1230rcg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gr1230rcg.step/gr1230rcg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Grenergy datasheet (14 pp, sha256
4a59b4fee34cac85, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# GR1230RCG
**Grenergy** · AC-DC Controllers & Regulators · SOT-26
GR1230RCG from Grenergy, in a SOT-26. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin for the controller. |
| 2 | COMP | input | Voltage feedback pin. A photo-coupler is connected here to control the duty cycle. Open-loop voltage ~5.2V; OLP trip level ~4.35V; requires a paralleling capacitor of 1-33 nF for noise filtering. |
| 3 | QRD | input | Quasi-resonant detection and OVP input. Upper clamp ~4.6V (IZCD=0.5mA), lower clamp ~-0.3V (IZCD=0.3mA); OVP threshold ~3.5V, UVP threshold ~0.5V. |
| 4 | CS | input | Current sense pin, connected to the external sense resistor for sensing the primary MOSFET current signal. Vcsmax(ON Time>4us) ~0.85V; internal slope compensation ~0.3V; leading-edge blanking ~350 ns. |
| 5 | VCC | power_in | Power supply pin. Recommended supply 9.5-26.5V; UVLO-ON ~16V, UVLO-OFF ~7.5V; internal VCC OVP ~28V. Requires a 2.2-10 µF bulk capacitor plus a small (0.1-0.47 µF) SMD ceramic capacitor close to the pin. |
| 6 | OUT | output | Gate driver output for the external primary MOSFET. Output low ≤1V @ 20mA; internal VGATE clamp ~13.5V (VCC=17V); typical rise/fall time 330/45 ns into 1nF load. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Grenergy |
| Package | SOT-26 |
| Category | Power Supply Chip |
| Pins | 6 |
## Ordering variants
Same part, different packaging or reel option.
- `GR1230RCG`
## CAD (KiCad official)
- Symbol: `GR1230RCG`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-26 (KiCad packages3D, STEP)
- 3D model files: `gr1230rcg-etched.step` / `gr1230rcg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `gr1230rcg.step` / `gr1230rcg.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Grenergy datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588911965469491200) (14 pp, sha256 `4a59b4fee34cac85`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/gr1230rcg-datasheet.pdf)