component
GP9305-F50-N-SW
Public Made by Adomby adom
Guestgood ADCs/DACs - Special Purpose, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
GP9305-F50-N-SW
Guestgood · ADCs/DACs - Special Purpose · SOP-8
GP9305-F50-N-SW from Guestgood, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connect; left floating. |
| 2 | NC | unconnected | No connect; left floating. |
| 3 | VIN | power_in | Analog voltage input, 0 V to 5 V, converted linearly to 0%-100% PWM duty cycle (DPWM = VIN/5V). |
| 4 | VCC | power_in | Power supply, 8 V to 40 V (15 V typical). |
| 5 | GND | power_in | Ground. |
| 6 | PWM | output | PWM duty-cycle signal output with high level equal to VCC (8 V to 40 V). |
| 7 | VCUR | input | Overcurrent protection monitor; PWM output turns off when VCUR exceeds 100 mV, and the pin is tied directly to ground if unused. |
| 8 | V5V | power_out | Internal LDO 5 V output (10 mA drive capability) that requires an external 1 uF capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Guestgood |
| Package | SOP-8 |
| Category | Data Acquisition |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC 电源电压 (supply voltage) | VCC | 8 | 15 | 40 | V | 5 | |
| ICC 电源功耗 (supply current) | ICC | 2 | 5 | mA | VCC @ 15.0V | 5 | |
| VIN 输入电压 (input voltage) | VIN | 0 | 5 | V | 5 | ||
| IIL 输入漏电流 (input leakage current) | IIL | 3 | μA | VIN = VCC or VSS | 5 | ||
| ILO 输出漏电流 (output leakage current) | ILO | 3 | μA | VIN = VCC or VSS | 5 | ||
| VOL 输出低电平 (output low voltage) | VOL | 0.4 | V | VCC @ 15.0V, IOL = 10 mA | 5 | ||
| Tr 输出上升时间 (output rise time) | Tr | 20 | 40 | ns | VCC @ 15.0V, CLOAD=5pF | 5 | |
| Tf 输出下降时间 (output fall time) | Tf | 20 | 40 | ns | VCC @ 15.0V, CLOAD=5pF | 5 | |
| IV5V* V5V驱动能力 (V5V drive capability) | IV5V* | 10 | mA | VCC @24V | 5 | ||
| fpwm PWM 信号频率 下限 (PWM frequency, minimum) | fpwm | 1 | Hz | 注1 (adjustable 1Hz to 1MHz) | 5 | ||
| fpwm PWM 信号频率 上限 (PWM frequency, maximum) | fpwm | 1 | MHz | 注1 (adjustable 1Hz to 1MHz) | 5 | ||
| ∆fpwm PWM 信号的频率误差 (PWM frequency error) | ∆fpwm | -3 | 0 | 3 | % | 5 | |
| ∆Dpwm PWM 信号占空比误差 (PWM duty cycle error) | ∆Dpwm | 0.5 | 1 | % | 5 | ||
| Dpwm PWM 信号的占空比 (PWM duty cycle range) | Dpwm | 0 | 100 | % | 注2 | 5 | |
| Jpwm PWM信号的抖动 (PWM jitter) | Jpwm | 0.1 | 0.2 | %p-p | 注3 (measured at 1KHz) | 5 | |
| 工业操作温度 (industrial operating temperature) | -40 | 125 | ℃ | 2 | |||
| 储存温度 (storage temperature) | -50 | 125 | ℃ | 2 | |||
| 输入电压 (input voltage, absolute max) | -0.3 | V | upper limit printed as VCC + 0.3 V | 2 | |||
| 最大电压 (maximum voltage) | 40 | V | 2 | ||||
| ESD 保护 (ESD protection) | 2000 | V | printed as > 2000 V | 2 | |||
| 工作温度 (operating temperature, -SW variant) | -40 | 85 | ℃ | ordering table, GP9305-F*-*-SW (SOP8) | 7 |
CAD (KiCad official)
- Symbol:
GP9305-F50-N-SW - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
gp9305-f50-n-sw-etched.step/gp9305-f50-n-sw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gp9305-f50-n-sw.step/gp9305-f50-n-sw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Guestgood datasheet (8 pp, sha256
834f03af41b1efea, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# GP9305-F50-N-SW
**Guestgood** · ADCs/DACs - Special Purpose · SOP-8
GP9305-F50-N-SW from Guestgood, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connect; left floating. |
| 2 | NC | unconnected | No connect; left floating. |
| 3 | VIN | power_in | Analog voltage input, 0 V to 5 V, converted linearly to 0%-100% PWM duty cycle (DPWM = VIN/5V). |
| 4 | VCC | power_in | Power supply, 8 V to 40 V (15 V typical). |
| 5 | GND | power_in | Ground. |
| 6 | PWM | output | PWM duty-cycle signal output with high level equal to VCC (8 V to 40 V). |
| 7 | VCUR | input | Overcurrent protection monitor; PWM output turns off when VCUR exceeds 100 mV, and the pin is tied directly to ground if unused. |
| 8 | V5V | power_out | Internal LDO 5 V output (10 mA drive capability) that requires an external 1 uF capacitor. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Guestgood |
| Package | SOP-8 |
| Category | Data Acquisition |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC 电源电压 (supply voltage) | VCC | 8 | 15 | 40 | V | | 5 |
| ICC 电源功耗 (supply current) | ICC | | 2 | 5 | mA | VCC @ 15.0V | 5 |
| VIN 输入电压 (input voltage) | VIN | 0 | | 5 | V | | 5 |
| IIL 输入漏电流 (input leakage current) | IIL | | | 3 | μA | VIN = VCC or VSS | 5 |
| ILO 输出漏电流 (output leakage current) | ILO | | | 3 | μA | VIN = VCC or VSS | 5 |
| VOL 输出低电平 (output low voltage) | VOL | | | 0.4 | V | VCC @ 15.0V, IOL = 10 mA | 5 |
| Tr 输出上升时间 (output rise time) | Tr | | 20 | 40 | ns | VCC @ 15.0V, CLOAD=5pF | 5 |
| Tf 输出下降时间 (output fall time) | Tf | | 20 | 40 | ns | VCC @ 15.0V, CLOAD=5pF | 5 |
| IV5V* V5V驱动能力 (V5V drive capability) | IV5V* | 10 | | | mA | VCC @24V | 5 |
| fpwm PWM 信号频率 下限 (PWM frequency, minimum) | fpwm | 1 | | | Hz | 注1 (adjustable 1Hz to 1MHz) | 5 |
| fpwm PWM 信号频率 上限 (PWM frequency, maximum) | fpwm | | | 1 | MHz | 注1 (adjustable 1Hz to 1MHz) | 5 |
| ∆fpwm PWM 信号的频率误差 (PWM frequency error) | ∆fpwm | -3 | 0 | 3 | % | | 5 |
| ∆Dpwm PWM 信号占空比误差 (PWM duty cycle error) | ∆Dpwm | | 0.5 | 1 | % | | 5 |
| Dpwm PWM 信号的占空比 (PWM duty cycle range) | Dpwm | 0 | | 100 | % | 注2 | 5 |
| Jpwm PWM信号的抖动 (PWM jitter) | Jpwm | | 0.1 | 0.2 | %p-p | 注3 (measured at 1KHz) | 5 |
| 工业操作温度 (industrial operating temperature) | | -40 | | 125 | ℃ | | 2 |
| 储存温度 (storage temperature) | | -50 | | 125 | ℃ | | 2 |
| 输入电压 (input voltage, absolute max) | | -0.3 | | | V | upper limit printed as VCC + 0.3 V | 2 |
| 最大电压 (maximum voltage) | | | | 40 | V | | 2 |
| ESD 保护 (ESD protection) | | 2000 | | | V | printed as > 2000 V | 2 |
| 工作温度 (operating temperature, -SW variant) | | -40 | | 85 | ℃ | ordering table, GP9305-F*-*-SW (SOP8) | 7 |
## CAD (KiCad official)
- Symbol: `GP9305-F50-N-SW`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `gp9305-f50-n-sw-etched.step` / `gp9305-f50-n-sw-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `gp9305-f50-n-sw.step` / `gp9305-f50-n-sw.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Guestgood datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8756349730249428992) (8 pp, sha256 `834f03af41b1efea`, retrieved 2026-10-18, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/gp9305-f50-n-sw-datasheet.pdf)