component
GP8242J
Public Made by Adomby adom
HaloChip AC-DC Controllers And Regulators, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownGP8242J
HaloChip · AC-DC Controllers And Regulators · SOP-8
GP8242J from HaloChip, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Chip power supply pin, with VCC absolute maximum of 35 V, VCC clamp current of 10 mA, UVLO threshold of 9.5 V typical, and OVP threshold of 25 V typical (clamp at 31.5 V typical). |
| 2 | GND | power_in | Chip ground reference pin. |
| 3 | FB | input | Output voltage feedback pin sampling the auxiliary winding, with a constant-voltage reference of 2.0 V typical and an FB pin voltage absolute range of -0.3 V to 7 V. |
| 4 | CS | input | Current sense pin for the sampling resistor Rs, with a constant-current detection threshold of 600 mV typical (588 to 612 mV) and a CS pin voltage absolute range of -0.3 V to 7 V. |
| 5 | D | passive | Drain of the internal power MOSFET, with a drain pin voltage absolute range of -0.3 V to 650 V. |
| 6 | D | passive | Drain of the internal power MOSFET, with a drain pin voltage absolute range of -0.3 V to 650 V. |
| 7 | D | passive | Drain of the internal power MOSFET, with a drain pin voltage absolute range of -0.3 V to 650 V. |
| 8 | D | passive | Drain of the internal power MOSFET, with a drain pin voltage absolute range of -0.3 V to 650 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HaloChip |
| Package | SOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC启动电压 | VCC_SZ | 17.5 | 19 | 20.5 | V | VCC上升 | 4 |
| VCC欠压保护阈值 | VCC_UVLO | 8.5 | 9.5 | 10.5 | V | VCC下降 | 4 |
| VCC过压保护值 | VCC_OVP | 23 | 25 | 27 | V | VCC上升 | 4 |
| VCC钳位电压值 | VCC_clamp | 30 | 31.5 | 33 | V | Ivcc=10mA | 4 |
| VCC启动电流 | ISZ | 3 | 20 | uA | VCC= VCC-SZ- 1V | 4 | |
| VCC工作电流 | Icc | 0.8 | 1.5 | mA | 启动之后 VCC=20V | 4 | |
| 恒流时电流检测阈值 | VCS | 588 | 600 | 612 | mV | 4 | |
| FB反馈基准电压 | VFB | 1.97 | 2 | 2.03 | V | 恒压模式 | 4 |
| VCC最大钳位电流(绝对最大值) | IVCC_clamp | 10 | mA | 3 | |||
| VCC电源电压(绝对最大值) | VCC | 35 | V | 3 | |||
| CS、FB脚电压 | -0.3 | 7 | V | 3 | |||
| Drain脚电压 | -0.3 | 650 | V | 3 | |||
| TJ工作结温范围 | TJ | -40 | 85 | ℃ | 3 | ||
| TJ最大结温 | TJ | 150 | ℃ | 3 | |||
| TSZG储存温度范围 | TSZG | -55 | 150 | ℃ | 3 | ||
| 最大焊接温度时间 | Tlead | 260 | ℃ | soldering 10s | 3 | ||
| ESD人体模型 | ESD | 2.5 | KV | 人体模型, 100pF电容通过1.5KΩ电阻放电 (注 2) | 3 | ||
| 热阻(SOP8) | 150 | ℃/W | 3 | ||||
| 芯片表面极限温度 | 135 | ℃ | 注 3 | 3 | |||
| VFB_DEM消磁比较阈值 | VFB_DEM | 25 | mV | 4 | |||
| Tmin_OFF最小关断时间 | Tmin_OFF | 2 | us | 4 | |||
| Tmax_OFF最大关断时间 | Tmax_OFF | 5 | ms | 4 | |||
| 输出短路阈值 | VFB_Short | 1.16 | V | 4 | |||
| 输出短路响应时间 | TFB_Short | 13 | ms | 4 | |||
| CC模式开关周期与消磁时间比值 | TCC/TDEM | 2 | 4 | ||||
| 线缆补偿最大电流 | Icablemax | 50 | uA | 4 | |||
| 软启动时间 | Tsoftstart | 2 | ms | 4 | |||
| 前沿消隐时间 | TLEB | 500 | ns | 4 | |||
| 过流跟踪控制延时 | TD_OC | 100 | ns | CL=0.5nF at GATE | 4 | ||
| 漏端击穿电压 | BVdss | 650 | V | 5 | |||
| 导通阻抗(GP8242J) | Rdson | 0.95 | Ω | I(Drain)=1A | 5 | ||
| 反向漏电流 | Idss | 1 | uA | 5 | |||
| 开通延迟时间 | Td(on) | 60 | ns | 5 | |||
| 关断延迟时间 | Td(off) | 128 | ns | 5 |
CAD (KiCad official)
- Symbol:
GP8242J - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
gp8242j-etched.step/gp8242j-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gp8242j.step/gp8242j.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HaloChip datasheet (10 pp, sha256
0bee6b53d84a6ada, retrieved 2026-10-19, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).