component
GP8242H
Public Made by Adomby adom
HaloChip AC-DC Controllers And Regulators, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
GP8242H
HaloChip · AC-DC Controllers And Regulators · SOP-8
GP8242H from HaloChip, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Chip power supply pin: VCC startup voltage is 17.5-20.5 V (rising), UVLO is 8.5-10.5 V (falling), OVP is 23-27 V, the clamp is 30-33 V at 10 mA, and the absolute maximum VCC is 35 V. |
| 2 | GND | power_in | Chip ground reference pin; the datasheet states no electrical limit for this pin. |
| 3 | FB | input | Output voltage feedback pin sampling the auxiliary winding; the constant-voltage reference is 1.97-2.03 V (2.0 V typical), the output short threshold is 1.16 V, and the absolute maximum voltage is -0.3 to 7 V. |
| 4 | CS | input | Current sense pin for the sense resistor Rs; the constant-current sense threshold is 588-612 mV (600 mV typical), the leading-edge blanking time is 500 ns, and the absolute maximum voltage is -0.3 to 7 V. |
| 5 | D | passive | Internal power MOSFET drain (pins 5-8 are internally connected); the drain voltage rating is 650 V (absolute maximum -0.3 to 650 V), and Rdson is 2 Ω for the GP8242H at 1 A. |
| 6 | D | passive | Internal power MOSFET drain (pins 5-8 are internally connected); the drain voltage rating is 650 V (absolute maximum -0.3 to 650 V), and Rdson is 2 Ω for the GP8242H at 1 A. |
| 7 | D | passive | Internal power MOSFET drain (pins 5-8 are internally connected); the drain voltage rating is 650 V (absolute maximum -0.3 to 650 V), and Rdson is 2 Ω for the GP8242H at 1 A. |
| 8 | D | passive | Internal power MOSFET drain (pins 5-8 are internally connected); the drain voltage rating is 650 V (absolute maximum -0.3 to 650 V), and Rdson is 2 Ω for the GP8242H at 1 A. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HaloChip |
| Package | SOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC启动电压 | VCC_SZ | 17.5 | 19 | 20.5 | V | VCC上升 | 4 |
| VCC欠压保护阈值 | VCC_UVLO | 8.5 | 9.5 | 10.5 | V | VCC下降 | 4 |
| VCC过压保护值 | VCC_OVP | 23 | 25 | 27 | V | VCC上升 | 4 |
| VCC钳位电压值 | VCC_clamp | 30 | 31.5 | 33 | V | Ivcc=10mA | 4 |
| VCC启动电流 | ISZ | 3 | 20 | uA | VCC= VCC-SZ- 1V | 4 | |
| VCC工作电流 | Icc | 0.8 | 1.5 | mA | 启动之后 VCC=20V | 4 | |
| 恒流时电流检测阈值 | VCS | 588 | 600 | 612 | mV | 4 | |
| FB反馈基准电压 | VFB | 1.97 | 2 | 2.03 | V | 恒压模式 | 4 |
| 工作结温范围 | TJ | -40 | 85 | ℃ | 3 | ||
| 电源电压 | VCC | 35 | V | 3 | |||
| VCC钳位电流 | IVCC_clamp | 10 | mA | 3 | |||
| CS、FB脚电压 | -0.3 | 7 | V | 3 | |||
| Drain脚电压 | -0.3 | 650 | V | 3 | |||
| 最大结温 | TJ | 150 | ℃ | 3 | |||
| 储存温度范围 | TSZG | -55 | 150 | ℃ | 3 | ||
| 最大焊接温度时间 | Tlead | 260 | ℃ | soldering 10s | 3 | ||
| ESD | 2.5 | KV | 人体模型，100pF 电容通过 1.5KΩ电阻放电 | 3 | |||
| 芯片表面极限温度（注3） | 135 | ℃ | 3 | ||||
| 热阻(SOP8) | 150 | ℃/W | 3 |
CAD (KiCad official)
- Symbol:
GP8242H - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
gp8242h-etched.step/gp8242h-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gp8242h.step/gp8242h.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HaloChip datasheet (10 pp, sha256
0bee6b53d84a6ada, retrieved 2026-10-19, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# GP8242H
**HaloChip** · AC-DC Controllers And Regulators · SOP-8
GP8242H from HaloChip, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Chip power supply pin: VCC startup voltage is 17.5-20.5 V (rising), UVLO is 8.5-10.5 V (falling), OVP is 23-27 V, the clamp is 30-33 V at 10 mA, and the absolute maximum VCC is 35 V. |
| 2 | GND | power_in | Chip ground reference pin; the datasheet states no electrical limit for this pin. |
| 3 | FB | input | Output voltage feedback pin sampling the auxiliary winding; the constant-voltage reference is 1.97-2.03 V (2.0 V typical), the output short threshold is 1.16 V, and the absolute maximum voltage is -0.3 to 7 V. |
| 4 | CS | input | Current sense pin for the sense resistor Rs; the constant-current sense threshold is 588-612 mV (600 mV typical), the leading-edge blanking time is 500 ns, and the absolute maximum voltage is -0.3 to 7 V. |
| 5 | D | passive | Internal power MOSFET drain (pins 5-8 are internally connected); the drain voltage rating is 650 V (absolute maximum -0.3 to 650 V), and Rdson is 2 Ω for the GP8242H at 1 A. |
| 6 | D | passive | Internal power MOSFET drain (pins 5-8 are internally connected); the drain voltage rating is 650 V (absolute maximum -0.3 to 650 V), and Rdson is 2 Ω for the GP8242H at 1 A. |
| 7 | D | passive | Internal power MOSFET drain (pins 5-8 are internally connected); the drain voltage rating is 650 V (absolute maximum -0.3 to 650 V), and Rdson is 2 Ω for the GP8242H at 1 A. |
| 8 | D | passive | Internal power MOSFET drain (pins 5-8 are internally connected); the drain voltage rating is 650 V (absolute maximum -0.3 to 650 V), and Rdson is 2 Ω for the GP8242H at 1 A. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HaloChip |
| Package | SOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC启动电压 | VCC_SZ | 17.5 | 19 | 20.5 | V | VCC上升 | 4 |
| VCC欠压保护阈值 | VCC_UVLO | 8.5 | 9.5 | 10.5 | V | VCC下降 | 4 |
| VCC过压保护值 | VCC_OVP | 23 | 25 | 27 | V | VCC上升 | 4 |
| VCC钳位电压值 | VCC_clamp | 30 | 31.5 | 33 | V | Ivcc=10mA | 4 |
| VCC启动电流 | ISZ | | 3 | 20 | uA | VCC= VCC-SZ- 1V | 4 |
| VCC工作电流 | Icc | | 0.8 | 1.5 | mA | 启动之后 VCC=20V | 4 |
| 恒流时电流检测阈值 | VCS | 588 | 600 | 612 | mV | | 4 |
| FB反馈基准电压 | VFB | 1.97 | 2 | 2.03 | V | 恒压模式 | 4 |
| 工作结温范围 | TJ | -40 | | 85 | ℃ | | 3 |
| 电源电压 | VCC | | | 35 | V | | 3 |
| VCC钳位电流 | IVCC_clamp | | | 10 | mA | | 3 |
| CS、FB脚电压 | | -0.3 | | 7 | V | | 3 |
| Drain脚电压 | | -0.3 | | 650 | V | | 3 |
| 最大结温 | TJ | | | 150 | ℃ | | 3 |
| 储存温度范围 | TSZG | -55 | | 150 | ℃ | | 3 |
| 最大焊接温度时间 | Tlead | | | 260 | ℃ | soldering 10s | 3 |
| ESD | | | | 2.5 | KV | 人体模型，100pF 电容通过 1.5KΩ电阻放电 | 3 |
| 芯片表面极限温度（注3） | | | | 135 | ℃ | | 3 |
| 热阻(SOP8) | | | | 150 | ℃/W | | 3 |
## CAD (KiCad official)
- Symbol: `GP8242H`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `gp8242h-etched.step` / `gp8242h-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `gp8242h.step` / `gp8242h.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HaloChip datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8600477610950877184) (10 pp, sha256 `0bee6b53d84a6ada`, retrieved 2026-10-19, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/gp8242h-datasheet.pdf)