main
History Download
Ray Publish 0.1.0 3bb64b2

GP82410

HaloChip · AC-DC Controllers & Regulators · SOT-23-5

GP82410 from HaloChip, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Chip ground reference for the controller, which the datasheet lists as the GND pin.
2 GATE output Drives the rear-stage MOSFET gate through a soft gate driver, with VOL at most 1 V at 20 mA sink, VOH at least 7.5 V at 20 mA source, and gate clamp 16 V at VDD 24 V.
3 CS input Peak current sense input for cycle-by-cycle limiting, with a constant-current threshold of 588 to 612 mV and 500 ns leading-edge blanking.
4 FB input Output voltage feedback input that samples the auxiliary winding, with a constant-voltage reference of 1.97 to 2.03 V and a cable compensation current of up to 50 uA.
5 VCC power_in Chip supply pin with a start-up voltage of 17 to 20 V, UVLO of 8.5 to 10.5 V, OVP of 23 to 27 V, clamp of 30 to 33 V at 10 mA, and an absolute maximum range of -0.3 to 31 V.

Key specifications

Parameter Value
Manufacturer HaloChip
Package SOT-23-5
Category Power Management
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC startup voltage (VCC rising) VCC_SZ 17 19 20 V VCC上升 4
VCC undervoltage lockout threshold (VCC falling) VCC_UVLO 8.5 9.5 10.5 V VCC下降 4
VCC overvoltage protection value (VCC rising) VCC_OVP 23 25 27 V VCC上升 4
VCC clamp voltage VCC_clamp 30 31.5 33 V Ivcc=10mA 4
VCC startup current ISZ 3 20 uA VCC= VCC-SZ- 1V 4
VCC operating current Icc 0.8 1.5 mA 启动之后 VCC=20V 4
Constant-current sense threshold VCS 588 600 612 mV 4
FB feedback reference voltage VFB 1.97 2 2.03 V 恒压模式 4
Leading-edge blanking time TLEB 500 ns 4
Overcurrent tracking control delay TD_OC 100 ns CL=0.5nF at GATE 4
Soft-start time Tsoftstart 2 ms 4
Demagnetization comparison threshold VFB_DEM 25 mV 4
Minimum off time Tmin_OFF 2 us 4
Maximum off time Tmax_OFF 5 ms 4
Output short threshold VFB_Short 0.9 V 4
Output short protection time TFB_Short 13 ms 4
Ratio of CC-mode switching period to demagnetization time TCC/TDEM 2 CC 模式开关周期与消磁时间比值 4
Maximum cable compensation current Icablemax 50 uA 4
Output low level VOL 1 V Io = 20 mA (抽流) 4
Output high level VOH 7.5 V Io = 20 mA (供流) 5
Output clamp voltage VG_Clamp 16 V VDD=24V 5
Output rise time T_r 700 ns CL = 0.5nF 5
Output fall time T_f 35 ns CL = 0.5nF 5
VCC supply voltage VCC -0.3 31 V 3
VCC clamp current 10 mA 3
CS and FB pin voltage -0.3 7 V 3
GATE pin voltage 20 V 3
Maximum junction temperature 150 ℃ 3
Operating temperature -40 85 ℃ 3
Storage temperature -55 150 ℃ 3
Reflow soldering maximum temperature 260 ℃ 时长短于 10s 3
ESD human body model 2.5 KV 3
Maximum switching frequency 70 Khz 3
Thermal resistance (SOP23-5) 300 ℃/W 3

CAD (KiCad official)

  • Symbol: GP82410
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: gp82410-etched.step / gp82410-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gp82410.step / gp82410.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HaloChip datasheet (10 pp, sha256 9b128f0020d96cf1, retrieved 2026-10-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF