component
GP8211S-TC50-EW
Public Made by Adomby adom
Guestgood Digital To Analog Converters (DAC), ESOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownGP8211S-TC50-EW
Guestgood · Digital To Analog Converters (DAC) · ESOP-8
GP8211S-TC50-EW from Guestgood, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCLK | input | I2C protocol clock signal input, with the I2C clock frequency rated at 400 kHz maximum. |
| 2 | SDA | bidirectional | I2C protocol data signal; the I2C input high level is specified as 2.7 V to 5.5 V. |
| 3 | NC | unconnected | No connection, left floating. |
| 4 | V5V | power_out | Internal LDO 5 V output that must be bypassed with an external 1 uF capacitor. |
| 5 | GND | power_in | Ground reference for the device. |
| 6 | VCC | power_in | Power supply input; the datasheet specifies 9 V to 36 V (12 V typical). |
| 7 | VOUT | output | 0-10 V analog voltage output, with an external 0.1 uF capacitor specified; the absolute maximum voltage rating is 36 V. |
| 8 | NC | unconnected | No connection, left floating. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Guestgood |
| Package | ESOP-8 |
| Category | Data Acquisition |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 电源电压 (supply voltage) | VCC | 9 | 12 | 36 | V | 7 | |
| 电源功耗 (supply current) | ICC | 2 | 3 | mA | VCC @12V 空载 | 7 | |
| 输出电压 (output voltage) | VOUT | 0 | 10 | V | 7 | ||
| 工业操作温度 (industrial operating temperature) | -40 | 85 | ℃ | 2 | |||
| 储存温度 (storage temperature) | -50 | 125 | ℃ | 2 | |||
| 输入电压 (input voltage) | -0.3 | V | upper limit printed as VCC + 0.3 V | 2 | |||
| 最大电压 (maximum voltage) | 36 | V | 2 | ||||
| ESD 保护 (ESD protection) | 2000 | V | printed as > 2000 V | 2 | |||
| 输出电压误差（校准）(calibrated output voltage error) | ΔVOUT | 0.01 | % | 与IOUT输出范围的比例 | 7 | ||
| 输出电流线性度 (output current linearity) | Lout | 0.01 | % | 7 | |||
| I2C时钟频率 (I2C clock frequency) | fsclk | 400 | K Hz | 7 | |||
| 温度系数 (temperature coefficient, ordering code TC50) | 50 | PPM/℃ | ordering code suffix TC50 | 8 |
CAD (KiCad official)
- Symbol:
GP8211S-TC50-EW - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
gp8211s-tc50-ew-etched.step/gp8211s-tc50-ew-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gp8211s-tc50-ew.step/gp8211s-tc50-ew.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Guestgood datasheet (9 pp, sha256
037f512ead03d5f6, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).