main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs gn431a-0-5: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers gn431a-0-5: viewers · Ray
gn431a-0-5-etched.fit.json gn431a-0-5: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
gn431a-0-5-etched.glb gn431a-0-5: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
gn431a-0-5-etched.step gn431a-0-5: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
gn431a-0-5.glb Publish 0.1.0 · Ray
gn431a-0-5.kicad_mod Publish 0.1.0 · Ray
gn431a-0-5.kicad_sym Publish 0.1.0 · Ray
gn431a-0-5.lbr Publish 0.1.0 · Ray
gn431a-0-5.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json gn431a-0-5: specified limits as data (metadata.characteristics, 19 rows from the datasheet) · Ray
README.md gn431a-0-5: specified limits as data (metadata.characteristics, 19 rows from the datasheet) · Ray

GN431A 0.5%

GN Semic · Voltage Reference · SOT-23

GN431A 0.5% from GN Semic, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REF input Reference input. Regulates VKA so that the voltage on REF (relative to Anode) equals the internal 2.495 V reference (VREF, typ, IKA=10 mA). Reference input current IREF is typically 1.5 μA (max 4 μA).
2 K passive Cathode. Regulated shunt terminal; sinks 1 mA to 100 mA in normal operation with VKA from VREF up to 36 V (abs max 37 V). Dynamic impedance ZKA ≈ 0.15 Ω typ.
3 A passive Anode. Common return terminal referenced to ground for both the cathode current path and the REF input.

Key specifications

Parameter Value
Manufacturer GN Semic
Package SOT-23
Category PMIC
Pins 3

Ordering variants

Same part, different packaging or reel option.

  • GN431A 0.5% SOT-23
  • GN431A 0.5% SOT-89

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reference input voltage (VKA=VREF, IKA=10mA) VREF 2.483 2.495 2.507 V VKA=VREF, IKA=10mA 2
Reference input voltage deviation over temperature VREF 4.5 17 mV VKA=VREF, IKA=10mA, -40℃≤TA≤+85℃ 2
Ratio of reference input voltage change to cathode voltage change VREF -1 -2.7 mV/V IKA=10mA, VKA=10V~VREF 2
Ratio of reference input voltage change to cathode voltage change VREF -0.5 -2 mV/V IKA=10mA, VKA=36V~10V 2
Reference input current IREF 1.5 4 μA IKA=10mA, R1=10K, R2=∞ 2
Reference input current deviation over temperature IREF 0.4 1.2 μA IKA=10mA, R1=10K, -20℃≤TA≤+85℃ 2
Minimum cathode current for regulation IKA(MIN) 0.45 1 mA VKA=VREF 2
Off-state cathode current IKA(OFF) 0.05 1 μA VKA=36V, VREF=0 2
Dynamic impedance ZKA 0.15 0.5 Ω VKA=VREF, IKA=1~100mA, f≤1.0KHz 2
Cathode voltage (recommended operating; minimum printed as VREF) VKA 36 V 2
Cathode current (recommended operating) IKA 1 100 mA 2
Operating temperature (recommended operating) TOPR -40 85 ℃ 2
Cathode voltage (absolute maximum) VKA 37 V 2
Cathode current, continuous (absolute maximum) IKA -100 150 mA 2
Reference input current (absolute maximum) IREF -0.05 10 mA 2
Maximum power dissipation PD 350 mW 2
Operating junction temperature TJ 150 ℃ 2
Storage temperature TSTG -65 150 ℃ 2
Junction-to-ambient thermal resistance, SOT-23 RθJA 416 ℃/W 2

CAD (KiCad official)

  • Symbol: GN431A 0.5%
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23 (KiCad packages3D, STEP)
  • 3D model files: gn431a-0-5-etched.step / gn431a-0-5-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gn431a-0-5.step / gn431a-0-5.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
gn431a-0-5.step 59 KB You want the bare part, or you mark your own boards.
gn431a-0-5-etched.step 1.8 MB You want the part with GN431A 0.5% already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 450 faces against 69 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: GN Semic datasheet (7 pp, sha256 ea99c4c853d5994e, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF