3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownGN393
GN Semic · Comparators · SOP-8
GN393 from GN Semic, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Comparator 1 output. Open-collector NPN output (emitter tied to GND) capable of sinking up to 16mA; requires external pull-up resistor to Vcc or any allowed supply. |
| 2 | IN1- | input | Comparator 1 inverting input. High-impedance input; typical bias current 25nA. Input common-mode range 0V to Vcc−1.5V. |
| 3 | IN1+ | input | Comparator 1 non-inverting input. High-impedance input; typical bias current 25nA. Input common-mode range 0V to Vcc−1.5V. |
| 4 | GND | power_in | Ground / negative supply return. Connect to 0V in single-supply operation or to the negative rail (down to −18V) in dual-supply operation. |
| 5 | IN2+ | input | Comparator 2 non-inverting input. High-impedance input; typical bias current 25nA. Input common-mode range 0V to Vcc−1.5V. |
| 6 | IN2- | input | Comparator 2 inverting input. High-impedance input; typical bias current 25nA. Input common-mode range 0V to Vcc−1.5V. |
| 7 | OUT2 | output | Comparator 2 output. Open-collector NPN output (emitter tied to GND) capable of sinking up to 16mA; requires external pull-up resistor to Vcc or any allowed supply. |
| 8 | Vcc | power_in | Positive supply. Single-supply 2.0V-36V or dual-supply ±1.0V-±18V. Typical supply current 0.4mA (max 1.0mA) with RL=∞, independent of supply voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GN Semic |
| Package | SOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Dual supply voltage | Vcc | 18 | V | 2 | |||
| Single supply voltage | Vcc | 36 | V | 2 | |||
| Input differential voltage | VIDR | 36 | V | 2 | |||
| Input common-mode voltage | VICR | -0.3 | 36 | V | 2 | ||
| Output short-circuit current to ground | IOG | 20 | mA | 2 | |||
| Maximum operating junction temperature | TJ(MAX) | 125 | ℃ | 2 | |||
| Power dissipation | PD | 570 | mW | 2 | |||
| Operating ambient temperature | Tamb | 0 | 70 | ℃ | 2 | ||
| Storage temperature | Tstg | -65 | 150 | ℃ | 2 | ||
| Input offset voltage | VIO | 1 | 5 | mV | Ta=25℃ | 2 | |
| Input offset voltage | VIO | 9 | mV | 0℃ Ta 70℃ | 2 | ||
| Input offset current | IIO | 5 | 50 | nA | Ta=25℃ | 2 | |
| Input offset current | IIO | 150 | nA | 0℃ Ta 70℃ | 2 | ||
| Input bias current | IIB | 25 | 250 | nA | Ta=25℃ | 2 | |
| Input bias current | IIB | 400 | nA | 0℃ Ta 70℃ | 2 | ||
| Input common-mode voltage range (max printed as Vcc-1.5 V) | VICR | 0 | V | Ta=25℃ | 2 | ||
| Input common-mode voltage range (max printed as Vcc-2.0 V) | VICR | 0 | V | 0℃ Ta 70℃ | 2 | ||
| Supply current | Icc | 0.4 | 1 | mA | RL= dual comparator | 2 | |
| Supply current | Icc | 2.5 | mA | RL= dual comparator, Vcc=30V | 2 | ||
| Voltage gain | Gv | 50 | 200 | V/mV | RL 15K, Vcc=15V | 2 | |
| Output sink current | ISINK | 6 | 16 | mA | VIN(-) 1.0V, VIN(+)=0V, Vo 1.5V | 3 | |
| Output saturation voltage | VSAT | 150 | 400 | mV | VIN(-) 1.0V, VIN(+)=0V, ISINK 4.0mA | 3 | |
| Output saturation voltage | VSAT | 700 | mV | VIN(-) 1.0V, VIN(+)=0V, ISINK 4.0mA, 0℃ Ta 70℃ | 3 | ||
| Output leakage current | IOL | 1000 | nA | VIN(+) 1.0V, VIN(-)=0V, Vo=30V, 0℃ Ta 70℃ | 3 | ||
| Large-signal response time | tRES | 300 | ns | VIN=TTL logic swing, VREF=1.4V, VRL=5.0V, RL=5.1K | 2 | ||
| Response time | tRES | 1.3 | ns | VRL=5.0V, RL=5.1K | 2 | ||
| Output leakage current | IOL | 0.1 | nA | VIN(+) 1.0V, VIN(-)=0V, Vo=5.0V | 3 |
CAD (KiCad official)
- Symbol:
GN393 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
gn393-etched.step/gn393-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gn393.step/gn393.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GN Semic datasheet (5 pp, sha256
d6713c7bc3915963, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).