main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs gn34063a: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers gn34063a: viewers · Ray
gn34063a-etched.fit.json gn34063a: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
gn34063a-etched.glb gn34063a: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
gn34063a-etched.step gn34063a: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
gn34063a.glb Publish 0.1.0 · Ray
gn34063a.kicad_mod Publish 0.1.0 · Ray
gn34063a.kicad_sym Publish 0.1.0 · Ray
gn34063a.lbr Publish 0.1.0 · Ray
gn34063a.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json gn34063a: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md gn34063a: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

GN34063A

GN Semic · DC-DC Converters · SOP-8

GN34063A from GN Semic, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SC output Switch transistor collector (Q1 output stage collector). Connects to the inductor/diode node of the DC-DC converter power stage. Rated up to 32V, switching current up to 1.2A.
2 SE output Switch transistor emitter (Q1 output stage emitter). Ties to ground return or to the current-sense/inductor node depending on the topology (boost/buck/inverting). Rated up to 32V.
3 CT passive Timing capacitor pin for the internal oscillator. An external capacitor from CT to GND sets the switching frequency (typ. 33 kHz at CT=1.0nF, up to ~100 kHz).
4 GND power_in Device ground reference for the internal control circuitry and the 1.25V reference.
5 FB input Comparator inverting input (feedback). Connect to the output resistor divider; the internal comparator regulates so that FB matches the 1.25V (±2%) internal reference. Input voltage range -0.3V to 30V; input bias current typ. -40nA.
6 VCC power_in Input supply voltage. Operating range 3.0V to 32V. Quiescent current typ. 2.5 mA (max 4.0 mA) at VCC=5.0V.
7 Ipk input Peak-current sense input. An external sense resistor between VCC and this pin sets the switch peak current; when the drop across Rsc reaches ~300 mV (VIPK, typ.), the oscillator terminates the on-time to limit switch current.
8 DC power_in Driver transistor (Q2) collector. Typically tied to VCC (directly or via a resistor to VCC in Darlington-drive configurations) to supply base drive to the output switch. Rated up to 32V, driver collector current up to 100 mA.

Key specifications

Parameter Value
Manufacturer GN Semic
Package SOP-8
Category PMIC
Pins 8

CAD (KiCad official)

  • Symbol: GN34063A
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: gn34063a-etched.step / gn34063a-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gn34063a.step / gn34063a.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
gn34063a.step 122 KB You want the bare part, or you mark your own boards.
gn34063a-etched.step 2.0 MB You want the part with GN34063A already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 490 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: GN Semic datasheet (8 pp, sha256 439f079d89cb800c, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF