main
Ray
gn24c02a: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi…
7667773
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188
{
"schema_version": 1,
"type": "component",
"slug": "gn24c02a",
"title": "GN24C02A",
"brief": "GN Semic EEPROM, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"version": "0.2.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"memory",
"gn24c02a"
],
"component": {
"mpn": "GN24C02A",
"manufacturer": "GN Semic",
"package": "SOP-8",
"pin_count": 8,
"category": "Memory",
"subcategory": "EEPROM",
"datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2404021724_GN-Semic-GN24C02A_C2758328.pdf",
"parts": {
"symbol": "gn24c02a.kicad_sym",
"footprint": "gn24c02a.kicad_mod",
"model_3d": "gn24c02a-etched.glb",
"model_3d_plain": "gn24c02a.glb",
"model_3d_step": "gn24c02a-etched.step",
"model_3d_step_plain": "gn24c02a.step",
"lbr": "gn24c02a.lbr"
},
"distributor_links": {},
"pins": [
{
"number": "1",
"name": "E0",
"type": "input",
"description": "Device address input bit 0. Tied to VCC or GND to form part of the slave address, allowing up to 8 GN24C02A devices on the same I2C bus. Should not be left floating."
},
{
"number": "2",
"name": "E1",
"type": "input",
"description": "Device address input bit 1. Tied to VCC or GND to select one of eight slave addresses. Should not be left floating."
},
{
"number": "3",
"name": "E2",
"type": "input",
"description": "Device address input bit 2. Tied to VCC or GND to select one of eight slave addresses. Should not be left floating."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Device ground / 0 V reference."
},
{
"number": "5",
"name": "SDA",
"type": "bidirectional",
"description": "I2C serial data line. Open-drain bidirectional; requires an external pull-up resistor to VCC (typ. 1.3 kΩ at 2.5-5.5 V, 10 kΩ at 1.7 V). Used to shift data in and out synchronous with SCL."
},
{
"number": "6",
"name": "SCL",
"type": "input",
"description": "I2C serial clock input. Supports up to 400 kHz for VCC 1.7-2.5 V and up to 1 MHz for VCC 2.5-5.5 V. Data on SDA is latched on rising edges and may change on falling edges."
},
{
"number": "7",
"name": "WCB",
"type": "input",
"description": "Write-control (write-protect) input. Tie to VCC to disable all write operations (read-only); tie to GND to enable normal read/write. Must not be left floating."
},
{
"number": "8",
"name": "VCC",
"type": "power_in",
"description": "Supply voltage input. Operating range 1.7 V to 5.5 V; absolute max 6.25 V. Standby current 1-3 uA typical; active write current up to 1.6 mA at 5.5 V / 400 kHz."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2404021724_GN-Semic-GN24C02A_C2758328.pdf",
"pages": 13,
"sha256": "5191155141ac9852",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "gn24c02a.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "gn24c02a-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "d5e1dec7fe487a4b371d08c003aa02c10e300da4d90c2e075895c9590cae8c68",
"checked": "2026-11-03",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "GN Semic",
"Package": "SOP-8",
"Category": "Memory",
"Pins": "8"
}
},
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"gn24c02a"
],
"discovery_pitch": "GN24C02A (GN Semic) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"gn24c02a.kicad_sym",
"gn24c02a.kicad_mod",
"gn24c02a.glb",
"gn24c02a.step",
"gn24c02a-etched.step",
"gn24c02a.lbr",
"docs/hero.png",
"docs/gn24c02a-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"visibility": {
"public": true
},
"updated_at": "2026-09-24T21:08:06.915Z"
}