main
Ray gn1628t: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 42cd074
{
  "schema_version": 1,
  "type": "component",
  "slug": "gn1628t",
  "title": "GN1628T",
  "brief": "GN Semic LED Display Drivers, SSOP-28-150mil. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.2.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "led-drv",
    "gn1628t"
  ],
  "component": {
    "mpn": "GN1628T",
    "manufacturer": "GN Semic",
    "package": "SSOP-28-150mil",
    "pin_count": 28,
    "category": "LED-drv",
    "subcategory": "LED Display Drivers",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/27135729e2f5bb2ab221aa66df477886.pdf",
    "parts": {
      "symbol": "gn1628t.kicad_sym",
      "footprint": "gn1628t.kicad_mod",
      "model_3d": "gn1628t-etched.glb",
      "model_3d_plain": "gn1628t.glb",
      "model_3d_step": "gn1628t-etched.step",
      "model_3d_step_plain": "gn1628t.step",
      "lbr": "gn1628t.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect. Leave floating."
      },
      {
        "number": "2",
        "name": "DIO",
        "type": "bidirectional",
        "description": "Serial data I/O for the 3-wire host interface. N-channel open-drain output with an internal ~24 kΩ pull-up to VDD. Data is shifted LSB first synchronous to CLK; direction switches between write (display RAM) and read (key-scan) cycles."
      },
      {
        "number": "3",
        "name": "CLK",
        "type": "input",
        "description": "Serial clock input for the 3-wire host interface. Data on DIO is sampled on the rising edge. Max clock frequency 1 MHz at 50% duty; min pulse width 400 ns."
      },
      {
        "number": "4",
        "name": "STB",
        "type": "input",
        "description": "Chip-select / strobe input. A falling edge starts a command/data frame; the rising edge latches it. Held high between transfers."
      },
      {
        "number": "5",
        "name": "K1",
        "type": "input",
        "description": "Key-matrix return line 1. Input with internal ~10 kΩ pull-down; driven high through the pressed key by the currently scanning KSn line."
      },
      {
        "number": "6",
        "name": "K2",
        "type": "input",
        "description": "Key-matrix return line 2. Input with internal ~10 kΩ pull-down; second row of the 10x2 key matrix."
      },
      {
        "number": "7",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply, 3.0-5.5 V (typ 5 V). Bypass to GND with a local decoupling capacitor. Tied internally to pin 21."
      },
      {
        "number": "8",
        "name": "SEG1/KS1",
        "type": "output",
        "description": "Muxed LED segment output SEG1 / key-scan drive line KS1. P-channel open-drain output; sources up to -25 mA typ (-40 mA max) for LED anode drive and pulses to strobe key column 1 during key scan."
      },
      {
        "number": "9",
        "name": "SEG2/KS2",
        "type": "output",
        "description": "Muxed LED segment output SEG2 / key-scan drive line KS2. P-channel open-drain, same drive rating as SEG1/KS1."
      },
      {
        "number": "10",
        "name": "SEG3/KS3",
        "type": "output",
        "description": "Muxed LED segment output SEG3 / key-scan drive line KS3. P-channel open-drain."
      },
      {
        "number": "11",
        "name": "SEG4/KS4",
        "type": "output",
        "description": "Muxed LED segment output SEG4 / key-scan drive line KS4. P-channel open-drain."
      },
      {
        "number": "12",
        "name": "SEG5/KS5",
        "type": "output",
        "description": "Muxed LED segment output SEG5 / key-scan drive line KS5. P-channel open-drain."
      },
      {
        "number": "13",
        "name": "SEG6/KS6",
        "type": "output",
        "description": "Muxed LED segment output SEG6 / key-scan drive line KS6. P-channel open-drain."
      },
      {
        "number": "14",
        "name": "SEG7/KS7",
        "type": "output",
        "description": "Muxed LED segment output SEG7 / key-scan drive line KS7. P-channel open-drain."
      },
      {
        "number": "15",
        "name": "SEG8/KS8",
        "type": "output",
        "description": "Muxed LED segment output SEG8 / key-scan drive line KS8. P-channel open-drain."
      },
      {
        "number": "16",
        "name": "SEG9/KS9",
        "type": "output",
        "description": "Muxed LED segment output SEG9 / key-scan drive line KS9. P-channel open-drain."
      },
      {
        "number": "17",
        "name": "SEG10/KS10",
        "type": "output",
        "description": "Muxed LED segment output SEG10 / key-scan drive line KS10. P-channel open-drain."
      },
      {
        "number": "18",
        "name": "SEG12/GRID7",
        "type": "output",
        "description": "Muxed segment SEG12 / grid (digit) driver GRID7. Push-pull (P/N) open-drain output; role depends on the display-mode command (4/13, 5/12, 6/11 or 7/10 grid/segment)."
      },
      {
        "number": "19",
        "name": "SEG13/GRID6",
        "type": "output",
        "description": "Muxed segment SEG13 / grid driver GRID6. Push-pull (P/N) open-drain output."
      },
      {
        "number": "20",
        "name": "SEG14/GRID5",
        "type": "output",
        "description": "Muxed segment SEG14 / grid driver GRID5. Push-pull (P/N) open-drain output."
      },
      {
        "number": "21",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply (tied to pin 7). 3.0-5.5 V. Both VDD pins should be connected to the same rail with local decoupling."
      },
      {
        "number": "22",
        "name": "GND",
        "type": "power_in",
        "description": "Ground return. All three GND pins (22, 25, 28) must be tied to the board 0 V plane."
      },
      {
        "number": "23",
        "name": "GRID4",
        "type": "output",
        "description": "Digit (grid) driver 4. N-channel open-drain sink, IOL 100 mA typ at VO = 0.3 V; strobes the common cathode of digit 4 during display refresh."
      },
      {
        "number": "24",
        "name": "GRID3",
        "type": "output",
        "description": "Digit (grid) driver 3. N-channel open-drain sink."
      },
      {
        "number": "25",
        "name": "GND",
        "type": "power_in",
        "description": "Ground return (see pin 22)."
      },
      {
        "number": "26",
        "name": "GRID2",
        "type": "output",
        "description": "Digit (grid) driver 2. N-channel open-drain sink."
      },
      {
        "number": "27",
        "name": "GRID1",
        "type": "output",
        "description": "Digit (grid) driver 1. N-channel open-drain sink."
      },
      {
        "number": "28",
        "name": "GND",
        "type": "power_in",
        "description": "Ground return (see pin 22)."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/27135729e2f5bb2ab221aa66df477886.pdf",
        "pages": 15,
        "sha256": "d96ca73eb1d02e82",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 28,
        "described": 28,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "gn1628t.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          10.2,
          2.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "gn1628t-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          10.2,
          2.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "2edffecffb0fcc86bceecb49d2ebed2d62a97d7487c35aa57f5b2b547364a9c3",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "GN Semic",
      "Package": "SSOP-28-150mil",
      "Category": "LED-drv",
      "Pins": "28"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "gn1628t"
  ],
  "discovery_pitch": "GN1628T (GN Semic) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "gn1628t.kicad_sym",
    "gn1628t.kicad_mod",
    "gn1628t.glb",
    "gn1628t.step",
    "gn1628t-etched.step",
    "gn1628t.lbr",
    "docs/hero.png",
    "docs/gn1628t-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "variants": [
    {
      "mpn": "GN1628T",
      "kind": "packaging"
    }
  ],
  "updated_at": "2026-09-24T21:07:10.359Z"
}