main
Ray gn1616: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) dc53dff
{
  "schema_version": 1,
  "type": "component",
  "slug": "gn1616",
  "title": "GN1616",
  "brief": "GN Semic LED Display Drivers, SOP-16. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.2.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "led-drv",
    "gn1616"
  ],
  "component": {
    "mpn": "GN1616",
    "manufacturer": "GN Semic",
    "package": "SOP-16",
    "pin_count": 16,
    "category": "LED-drv",
    "subcategory": "LED Display Drivers",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/dcc0b9b5e4b26f98a8b0b6ab140f5b6b.pdf",
    "parts": {
      "symbol": "gn1616.kicad_sym",
      "footprint": "gn1616.kicad_mod",
      "model_3d": "gn1616-etched.glb",
      "model_3d_plain": "gn1616.glb",
      "model_3d_step": "gn1616-etched.step",
      "model_3d_step_plain": "gn1616.step",
      "lbr": "gn1616.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "DIO",
        "type": "bidirectional",
        "description": "Serial data input/output, LSB first. Data is shifted in on the CLK rising edge and shifted out on the CLK falling edge. Output stage is N-channel open drain with an internal pull-up of approximately 20 kΩ; low-level output drive IOL ≈ 4-8 mA at VO = 0.4 V."
      },
      {
        "number": "2",
        "name": "CLK",
        "type": "input",
        "description": "Serial clock input. Data on DIO is latched on the rising edge and output data changes on the falling edge. Maximum clock frequency 1 MHz at 50% duty cycle; minimum pulse width 400 ns. CLK is ignored while STB is high."
      },
      {
        "number": "3",
        "name": "STB",
        "type": "input",
        "description": "Chip-select / strobe input. A rising or falling edge initializes the serial interface, then the chip waits for a command; the first byte after STB goes low is treated as a command and terminates any in-progress operation. While STB is high, CLK is ignored."
      },
      {
        "number": "4",
        "name": "VDD",
        "type": "power_in",
        "description": "Logic supply voltage. Recommended operating range 3.0-5.5 V (typ 5 V); absolute maximum -0.5 to +7.0 V."
      },
      {
        "number": "5",
        "name": "SEG1",
        "type": "output",
        "description": "Segment output 1, P-channel open-drain. Sources up to |IOH| ≈ 25 mA (typ) at VO = VDD-2 V; absolute maximum segment drive current 50 mA."
      },
      {
        "number": "6",
        "name": "SEG2",
        "type": "output",
        "description": "Segment output 2, P-channel open-drain LED segment driver."
      },
      {
        "number": "7",
        "name": "SEG3",
        "type": "output",
        "description": "Segment output 3, P-channel open-drain LED segment driver."
      },
      {
        "number": "8",
        "name": "SEG4",
        "type": "output",
        "description": "Segment output 4, P-channel open-drain LED segment driver."
      },
      {
        "number": "9",
        "name": "SEG5",
        "type": "output",
        "description": "Segment output 5, P-channel open-drain LED segment driver."
      },
      {
        "number": "10",
        "name": "SEG6",
        "type": "output",
        "description": "Segment output 6, P-channel open-drain LED segment driver."
      },
      {
        "number": "11",
        "name": "SEG7",
        "type": "output",
        "description": "Segment output 7, P-channel open-drain LED segment driver."
      },
      {
        "number": "12",
        "name": "GRID4",
        "type": "output",
        "description": "Digit/grid output 4, N-channel open-drain. Sinks up to IOL ≈ 140 mA (typ) at VO = 0.3 V; absolute maximum grid drive current 200 mA."
      },
      {
        "number": "13",
        "name": "GRID3",
        "type": "output",
        "description": "Digit/grid output 3, N-channel open-drain LED digit driver."
      },
      {
        "number": "14",
        "name": "GND",
        "type": "power_in",
        "description": "Logic ground reference; connect to system ground (0 V)."
      },
      {
        "number": "15",
        "name": "GRID2",
        "type": "output",
        "description": "Digit/grid output 2, N-channel open-drain LED digit driver."
      },
      {
        "number": "16",
        "name": "GRID1",
        "type": "output",
        "description": "Digit/grid output 1, N-channel open-drain LED digit driver."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/dcc0b9b5e4b26f98a8b0b6ab140f5b6b.pdf",
        "pages": 9,
        "sha256": "4fbab30f2e850746",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "gn1616.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "gn1616-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "5ace07a86f8f82bb5f8b996330f7c501fe74bf7352d26889b4460f604d54f334",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "GN Semic",
      "Package": "SOP-16",
      "Category": "LED-drv",
      "Pins": "16"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "gn1616"
  ],
  "discovery_pitch": "GN1616 (GN Semic) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "gn1616.kicad_sym",
    "gn1616.kicad_mod",
    "gn1616.glb",
    "gn1616.step",
    "gn1616-etched.step",
    "gn1616.lbr",
    "docs/hero.png",
    "docs/gn1616-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "variants": [
    {
      "mpn": "GN1616SOP16",
      "kind": "packaging"
    }
  ],
  "updated_at": "2026-09-24T21:06:30.109Z"
}