GM1205ACPZ-R7

{
  "slug": "gm1205acpz-r7",
  "version": "0.1.0",
  "type": "component",
  "description": "GONGMOSEMI Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, DFN-10-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "gm1205acpz-r7",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "gm1205acpz-r7.kicad_sym",
    "gm1205acpz-r7.kicad_mod",
    "gm1205acpz-r7.glb",
    "gm1205acpz-r7.step",
    "gm1205acpz-r7.lbr",
    "docs/hero.png",
    "docs/gm1205acpz-r7-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "gm1205acpz-r7-hero.glb",
    "gm1205acpz-r7-hero.overlay.json"
  ],
  "component": {
    "mpn": "GM1205ACPZ-R7",
    "manufacturer": "GONGMOSEMI",
    "package": "DFN-10-EP(3x3)",
    "pin_count": 11,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8773986111959900160",
    "parts": {
      "symbol": "gm1205acpz-r7.kicad_sym",
      "footprint": "gm1205acpz-r7.kicad_mod",
      "model_3d": "gm1205acpz-r7-hero.glb",
      "model_3d_plain": "gm1205acpz-r7.glb",
      "model_3d_step": "gm1205acpz-r7-etched.step",
      "model_3d_step_plain": "gm1205acpz-r7.step",
      "lbr": "gm1205acpz-r7.lbr"
    },
    "distributor_links": {
      "lcsc": "C7427505"
    },
    "distributor_check": {
      "checked_at": "2026-10-09T13:29:26Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IN",
        "type": "power_in",
        "description": "Regulator supply input; a typical 4.7µF bypass capacitor is required at IN, and IN to GND is rated −0.3 V to +22 V."
      },
      {
        "number": "2",
        "name": "IN",
        "type": "power_in",
        "description": "Regulator supply input (second IN pin, tied to pin 1); a typical 4.7µF bypass capacitor is required at IN, and IN to GND is rated −0.3 V to +22 V."
      },
      {
        "number": "3",
        "name": "EN/UV",
        "type": "input",
        "description": "Enable/UVLO input: pulling it low puts the device in shutdown (quiescent current below 1µA, output off); the turn-on threshold is 1.07 V with 100 mV hysteresis, and it must not be left floating; EN/UV to GND is rated −0.3 V to +22 V."
      },
      {
        "number": "4",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good output that goes high-impedance when PGFB is above 295 mV; leave floating if unused; PG to GND is rated −0.3 V to +22 V."
      },
      {
        "number": "5",
        "name": "ILIM",
        "type": "passive",
        "description": "Current-limit programming pin: a resistor from ILIM to GND (Kelvin-connected to the GND pin) sets the limit with a nominal scale factor of 278 mA·kΩ, and the pin also provides a 0 V to 300 mV current monitor; ILIM to GND is rated −0.3 V to +1 V, and it should be tied to GND if unused."
      },
      {
        "number": "6",
        "name": "PGFB",
        "type": "input",
        "description": "Power-good feedback: PG is pulled high when PGFB rises above 295 mV (20 mV hysteresis), and PGFB also activates the fast-start circuit; tie it to IN if unused; PGFB to GND is rated −0.3 V to +22 V."
      },
      {
        "number": "7",
        "name": "SET",
        "type": "passive",
        "description": "Voltage-set pin: a precision 100µA current flows through an external resistor from SET to GND so that VOUT = ISET × RSET over 1 V to 15 V; SET to GND is rated −0.3 V to +16 V and SET pin current is limited to −10 mA to +10 mA."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin, to be connected directly to the exposed-pad ground plane for correct electrical and thermal performance."
      },
      {
        "number": "9",
        "name": "OUTS",
        "type": "input",
        "description": "Output sense input (non-inverting input of the error amplifier), to be Kelvin-connected directly to the output capacitor and load; OUTS to GND is rated −0.3 V to +16 V."
      },
      {
        "number": "10",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulator output that powers the load (up to 500 mA), requiring at least 10µF ceramic with ESR below 50 mΩ and ESL below 2 nH; OUT to GND is rated −0.3 V to +16 V."
      },
      {
        "number": "11",
        "name": "GND",
        "type": "power_in",
        "description": "Ground, listed as GND pin 11 in the pin table for this package; the datasheet states the exposed back is electrically GND and must be soldered to PCB ground."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Table 1 lists GND as pins 8 and 11 for the 10-pin package, but a 10-pin package has no pin 11 as a l; Pin-to-position mapping comes from Figure 2 (top view, page 4), which is image-only in the extracted; ILIM and SET are typed as passive because the datasheet describes them as resistor-programmed setpoi"
        ],
        "pages_sent": 20,
        "cost_usd": 0.1084,
        "at": "2026-10-09T13:28:11"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8773986111959900160",
        "pages": 20,
        "sha256": "7f51388aa385fbd3",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "gm1205acpz-r7.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "738e2eb45860c11759f8e4f44ab26932b7c15e4d5d6c8c9ac22ae866a3e38711",
        "checked": "2026-10-09",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "gm1205acpz-r7-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "0f3fbae39af53f4f31ba210cf4b5019247c0739fbe5a82ca5a878397d159a28d",
        "checked": "2026-10-09",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}