JST GHR-04V-S

Four-position GH 1.25 mm off-board cable housing. Manufacturer drawing, pages 2–3.

The empty keyed housing is 6.25 × 4.15 × 5.70 mm, with four contact positions spanning 3.75 mm. It mates with BM04B-GHS-TBT and uses four separately ordered SSHL-002T-P0.2 contacts. The authored STEP preserves the external drawing envelope; socket passages and latch are illustrative. No precise mating geometry or retention is qualified. Its footprint is a mechanical template with zero electrical pads, not a solder footprint.

GH contacts accept AWG30–26 with 0.76–1.00 mm insulation diameter. The family catalog rating is 1 A with AWG26, 50 V and −40 to105°C including current heating; verify the actual harness conductor and crimp process. SSHL-003 contacts are not a substitute. The pin numbers describe contact positions, not project signals. Check polarity from the mating face before assembly.

Symbol · Footprint or mechanical template · STEP · Provenance

Native parser and rendered geometry checks are design evidence, not physical fit, pull-test or repeated-mating qualification.