Generated by kicad-footprint-generator · KiCad file format 20260206
GH125-S07CCA-00
JUSHUO · Wire To Board Connector · JST_GH_BM07B-GHS-TBT_1x07-1MP_P1.25mm_Vertical
GH125-S07CCA-00 from JUSHUO, in a JST_GH_BM07B-GHS-TBT_1x07-1MP_P1.25mm_Vertical. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
| 3 | 3 | passive | Contact 3; numbering follows the footprint. |
| 4 | 4 | passive | Contact 4; numbering follows the footprint. |
| 5 | 5 | passive | Contact 5; numbering follows the footprint. |
| 6 | 6 | passive | Contact 6; numbering follows the footprint. |
| 7 | 7 | passive | Contact 7; numbering follows the footprint. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JUSHUO |
| Package | JST_GH_BM07B-GHS-TBT_1x07-1MP_P1.25mm_Vertical |
| Category | Connectors |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Contact resistance (as mated, initial) | 20 | mΩ | Mated connector, closed loop across two terminals (9.1) | 5 | |||
| Insulation resistance (initial) | 500 | MΩ | Mated; 100 V DC between adjacent contacts and contacts-to-enclosure for 1 min (9.2) | 5 | |||
| Contact resistance after heat test | 60 | mΩ | +85 °C ±2 °C, 96 h, mated, then 1-2 h recovery (10.1) | 5 | |||
| Contact resistance after cold test | 60 | mΩ | -25 °C ±2 °C, 96 h, mated, then 1-2 h recovery (10.2) | 5 | |||
| Insulation resistance after moisture test | 60 | MΩ | 40 °C ±2 °C, 90-96% RH, 96 h, mated (10.3) | 5 | |||
| Withstand voltage after moisture test | 250 | V AC | 40 °C ±2 °C, 90-96% RH, 96 h, mated, 1 min (10.3) | 5 | |||
| Contact resistance after temperature cycle | 60 | mΩ | -25 °C / +85 °C, 5 cycles (10.4) | 6 | |||
| Contact resistance after salt spray | 60 | mΩ | 5% NaCl spray, 24 h (10.5) | 6 | |||
| PIN fixing force (single pin) | 5 | N | Pull force on pin at 25 ±3 mm/min until pin withdrawn from housing (11.1) | 8 | |||
| Terminal retention force in housing (single terminal) | 7 | N | Pull at 25 ±3 mm/min along conductor direction (11.2) | 8 | |||
| Contact resistance after mechanical life | 80 | mΩ | Unpowered, 30 mating cycles at 10 per minute (11.3) | 8 | |||
| Crimp pull-out force, 26AWG wire | 17.8 | N | Axial pull-out at 25 ±3 mm/min (11.4) | 8 | |||
| Crimp pull-out force, 28AWG wire | 8.9 | N | Axial pull-out at 25 ±3 mm/min (11.4) | 8 | |||
| Crimp pull-out force, 30AWG wire | 4.4 | N | Axial pull-out at 25 ±3 mm/min (11.4) | 8 | |||
| Crimp pull-out force, 32AWG wire | 2.2 | N | Axial pull-out at 25 ±3 mm/min (11.4) | 8 | |||
| Insertion force | 2 | N | Per pin; mated on same axis, lock removed, test speed 20 ±5 mm/min (11.5) | 8 | |||
| Pull-out force | 0.3 | N | Per pin; mated on same axis, lock removed, test speed 20 ±5 mm/min (11.5) | 8 | |||
| Operating temperature range | -25 | 85 | °C | Standard rating, operating temperature range | 4 | ||
| Operating humidity range | 90 | %RH | Operating; relative humidity below 90% | 4 | |||
| Rated voltage | 50 | V | Standard rating | 4 | |||
| Rated current | 1 | A | Standard rating, AC/DC | 4 | |||
| Storage temperature range | -20 | 50 | °C | Storage after packing; relative humidity not more than 90% | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | LCP | 基座 base GH LCP E130i | 4 | |
| contacts | 磷铜 | 插针 pin GH 磷铜 Phosphor copper | 4 |
CAD (KiCad official)
- Symbol:
GH125-S07CCA-00 - Footprint:
Connector_JST:JST_GH_BM07B-GHS-TBT_1x07-1MP_P1.25mm_Vertical - 3D model: JST_GH_BM07B-GHS-TBT_1x07-1MP_P1.25mm_Vertical (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: JUSHUO datasheet (10 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primaryconnector numbering(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).