main
Ray Publish 0.1.0 b186d38

GH125-S06CCA-00

JUSHUO · Wire To Board Connector · JST_GH_BM06B-GHS-TBT_1x06-1MP_P1.25mm_Vertical

GH125-S06CCA-00 from JUSHUO, in a JST_GH_BM06B-GHS-TBT_1x06-1MP_P1.25mm_Vertical. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1 passive Contact 1; numbering follows the footprint.
2 2 passive Contact 2; numbering follows the footprint.
3 3 passive Contact 3; numbering follows the footprint.
4 4 passive Contact 4; numbering follows the footprint.
5 5 passive Contact 5; numbering follows the footprint.
6 6 passive Contact 6; numbering follows the footprint.

Key specifications

Parameter Value
Manufacturer JUSHUO
Package JST_GH_BM06B-GHS-TBT_1x06-1MP_P1.25mm_Vertical
Category Connectors
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Rated voltage 50 V 4
Rated current 1 A AC/DC 4
Operating temperature range -25 85 ℃ 4
Contact resistance (initial) 20 mΩ Mated; closed loop between two terminals, contact resistance meter 5
Insulation resistance (initial) 500 MΩ Mated; 100 V DC between adjacent contacts and contacts-enclosure, 1 min 5
Contact resistance after heat test 60 mΩ +85℃±2℃, 96 H, then 1-2 H recovery 5
Contact resistance after cold test 60 mΩ -25℃±2℃, 96 H, then 1-2 H recovery 5
Insulation resistance after moisture test 60 MΩ 40℃±2℃, RH 90-96%, 96 H, then 1-2 H recovery 5
Withstand voltage after moisture test 250 V AC 40℃±2℃, RH 90-96%, 96 H; printed as 250V AC/minute 5
Contact resistance after temperature cycle 60 mΩ -25℃±3℃ / +85℃±3℃ cycle, 30 min each, 5 cycles 6
Contact resistance after salt spray 60 mΩ (5±1)% NaCl solution, continuous spray 24 H 6
Solder tin wetting area (solderability) 95 % Dip in 260±5℃ tin solution, hold 2.5±0.5 s 7
Pin fixing force, single pin 5 N Pull-out at 25±3 mm/min 8
Terminal retention force, single terminal 7 N Pulled from housing at 25±3 mm/min 8
Contact resistance after mechanical life 80 mΩ Unpowered, 30 mating cycles at 10 cycles/min 8
Terminal crimp pull-out force, 26AWG wire 17.8 N 26AWG wire, axial pull-out at 25±3 mm/min 8
Terminal crimp pull-out force, 28AWG wire 8.9 N 28AWG wire, axial pull-out at 25±3 mm/min 8
Terminal crimp pull-out force, 30AWG wire 4.4 N 30AWG wire, axial pull-out at 25±3 mm/min 8
Terminal crimp pull-out force, 32AWG wire 2.2 N 32AWG wire, axial pull-out at 25±3 mm/min 8
Insertion force (per pin) 2 N Per pin; mating at 20±5 mm/min, hole-seat lock removed 8
Pull-out force (per pin) 0.3 N Per pin; un-mating at 20±5 mm/min, hole-seat lock removed 8

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing LCP 基座 base GH LCP E130i 4
contacts 磷铜 插针 pin GH 磷铜 Phosphor copper 4

CAD (KiCad official)

  • Symbol: GH125-S06CCA-00
  • Footprint: Connector_JST:JST_GH_BM06B-GHS-TBT_1x06-1MP_P1.25mm_Vertical
  • 3D model: JST_GH_BM06B-GHS-TBT_1x06-1MP_P1.25mm_Vertical (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: JUSHUO datasheet (10 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins, primary connector numbering (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF