main
Ray Publish 0.1.0 1734028

GH125-S03DCA-00

JUSHUO · Wire To Board Connector · JST_GH_SM03B-GHS-TB_1x03-1MP_P1.25mm_Horizontal

GH125-S03DCA-00 from JUSHUO, in a JST_GH_SM03B-GHS-TB_1x03-1MP_P1.25mm_Horizontal. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1 passive Contact 1; numbering follows the footprint.
2 2 passive Contact 2; numbering follows the footprint.
3 3 passive Contact 3; numbering follows the footprint.

Key specifications

Parameter Value
Manufacturer JUSHUO
Package JST_GH_SM03B-GHS-TB_1x03-1MP_P1.25mm_Horizontal
Category Connectors
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Rated voltage 50 V 4
Rated current 1 A AC/DC 4
Operating temperature range -25 85 ℃ 4
Operating humidity range 90 % Relative humidity below 90% 4
Storage temperature range -20 50 ℃ Packed connector in storage, relative humidity not more than 90% 4
Contact resistance (initial) 20 mΩ Mated connector, measured across two terminals 5
Insulation resistance 500 MΩ 100 V DC applied between adjacent contacts and contacts-enclosure for 1 min 5
Contact resistance after heat test 60 mΩ After 96 h at +85℃±2℃ 5
Contact resistance after cold test 60 mΩ After 96 h at -25℃±2℃ 5
Insulation resistance after moisture test 60 MΩ After 96 h at 40℃±2℃, 90-96% RH 5
Withstand voltage after moisture test 250 V AC/minute After 96 h at 40℃±2℃, 90-96% RH 5
Contact resistance after temperature cycle 60 mΩ After 5 cycles of -25℃ to +85℃ 6
Contact resistance after salt spray 60 mΩ After 24 h continuous spray of (5±1)% NaCl solution 6
Contact resistance after mechanical life 80 mΩ After 30 plug/unplug cycles at 10 times/min, unpowered 8
Pin fixing force 5 N Single pin, pulled at 25±3 mm/min 8
Terminal retention force in plastic part 7 N Single terminal, pulled at 25±3 mm/min 8
Terminal crimp wire pull-out force 17.8 N 26AWG wire, axial pull at 25±3 mm/min 8
Terminal crimp wire pull-out force 8.9 N 28AWG wire, axial pull at 25±3 mm/min 8
Terminal crimp wire pull-out force 4.4 N 30AWG wire, axial pull at 25±3 mm/min 8
Terminal crimp wire pull-out force 2.2 N 32AWG wire, axial pull at 25±3 mm/min 8
Insertion force 2 N Per pin; test speed 20±5 mm/min; hole-seat lock removed 8
Pullout force 0.3 N Per pin; test speed 20±5 mm/min; hole-seat lock removed 8

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing LCP 基座 base GH LCP E130i 4
contacts 磷铜 插针 pin GH 磷铜 Phosphor copper 4

CAD (KiCad official)

  • Symbol: GH125-S03DCA-00
  • Footprint: Connector_JST:JST_GH_SM03B-GHS-TB_1x03-1MP_P1.25mm_Horizontal
  • 3D model: JST_GH_SM03B-GHS-TB_1x03-1MP_P1.25mm_Horizontal (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: JUSHUO datasheet (10 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins, primary connector numbering (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF