main
Ray Publish 0.1.0 46bed02

GH125-S02DCA-00

JUSHUO · Wire To Board Connector · JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal

GH125-S02DCA-00 from JUSHUO, in a JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1 passive Contact 1; numbering follows the footprint.
2 2 passive Contact 2; numbering follows the footprint.

Key specifications

Parameter Value
Manufacturer JUSHUO
Package JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal
Category Connectors
Pins 2

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Contact resistance (initial) 20 mΩ Mated connector; measured between two terminals forming a closed loop (test 9.1) 5
Insulation resistance (initial) 500 MΩ 100 V DC for 1 min between adjacent contacts and between contacts and enclosure, mated (test 9.2) 5
Contact resistance after heating test 60 mΩ Mated; after +85℃±2℃ for 96 h, then 1-2 h normal environment (test 10.1) 5
Contact resistance after cold test 60 mΩ Mated; after -25℃±2℃ for 96 h, then 1-2 h normal environment (test 10.2) 5
Insulation resistance after moisture resistance test 60 MΩ After 40℃±2℃, 90-96% RH for 96 h (test 10.3) 5
Withstand voltage after moisture resistance test 250 V AC 1 min; after 40℃±2℃, 90-96% RH for 96 h (test 10.3) 5
Contact resistance after temperature cycle 60 mΩ Mated; after 5 cycles of -25℃ / room temp / +85℃ / room temp (test 10.4) 6
Contact resistance after salt spray test 60 mΩ Mated; after 24 h continuous 5±1% NaCl spray (test 10.5) 6
Contact resistance after mechanical life test 80 mΩ Unpowered; after 30 plug/unplug cycles at 10 times/min (test 11.3) 8
Pin fixing force 5 N Single pin; pulled from pin holder at 25±3 mm/min (test 11.1) 8
Terminal retention force in plastic housing 7 N Single terminal; pulled from housing at 25±3 mm/min (test 11.2) 8
Terminal crimp wire pull-out force, 26AWG 17.8 N 26AWG wire; axial pull at 25±3 mm/min (test 11.4) 8
Terminal crimp wire pull-out force, 28AWG 8.9 N 28AWG wire; axial pull at 25±3 mm/min (test 11.4) 8
Terminal crimp wire pull-out force, 30AWG 4.4 N 30AWG wire; axial pull at 25±3 mm/min (test 11.4) 8
Terminal crimp wire pull-out force, 32AWG 2.2 N 32AWG wire; axial pull at 25±3 mm/min (test 11.4) 8
Insertion force 2 N Per pin; mating with housing lock removed, test speed 20±5 mm/min (test 11.5) 8
Pullout force 0.3 N Per pin; housing lock removed, test speed 20±5 mm/min (test 11.5) 8
Rated voltage 50 V Standard rating, rated voltage 4
Rated current 1 A Standard rating, AC/DC 4
Operating temperature range -25 85 ℃ Standard rating, operating temperature range 4
Operating humidity range 90 %RH Standard rating, relative humidity below 90% 4
Storage temperature (packed connector) -20 50 ℃ Storage of packaged connector, relative humidity not more than 90%, no corrosive gases 4
Transport temperature -20 50 ℃ Transportation environment, avoid rain, snow and sunlight 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing LCP 基座 base GH LCP E130i 4
contacts 磷铜 插针 pin GH 磷铜 Phosphor copper 4

CAD (KiCad official)

  • Symbol: GH125-S02DCA-00
  • Footprint: Connector_JST:JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal
  • 3D model: JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: JUSHUO datasheet (10 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins, primary connector numbering (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF