GD5F1GQ5REYIGR

{
  "schema_version": 1,
  "type": "component",
  "slug": "gd5f1gq5reyigr",
  "title": "GD5F1GQ5REYIGR",
  "brief": "GigaDevice Semicon Beijing NAND FLASH, WSON-8-EP(6x8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "memory",
    "gd5f1gq5reyigr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "GD5F1GQ5REYIGR",
    "manufacturer": "GigaDevice Semicon Beijing",
    "package": "WSON-8-EP(6x8)",
    "pin_count": 9,
    "category": "Memory",
    "subcategory": "NAND FLASH",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589042092094205952",
    "parts": {
      "symbol": "gd5f1gq5reyigr.kicad_sym",
      "footprint": "gd5f1gq5reyigr.kicad_mod",
      "model_3d": "gd5f1gq5reyigr-etched.glb",
      "model_3d_plain": "gd5f1gq5reyigr.glb",
      "model_3d_step": "gd5f1gq5reyigr-etched.step",
      "model_3d_step_plain": "gd5f1gq5reyigr.step",
      "lbr": "gd5f1gq5reyigr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2927042",
      "digikey": "1970-GD5F1GQ5REYIGRTR-ND",
      "mouser": "363-GD5F1GQ5REYIGR"
    },
    "distributor_check": {
      "checked_at": "2026-10-01T17:23:39Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "1970-GD5F1GQ5REYIGRTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "363-GD5F1GQ5REYIGR",
        "status": "found",
        "lifecycle": "New Product"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CS#",
        "type": "input",
        "description": "Chip Select input, active low; device enters idle state when CS# is HIGH; recommended to pull HIGH when SPI flash is not in use to avoid device remaining in read state."
      },
      {
        "number": "2",
        "name": "SO/SIO1",
        "type": "bidirectional",
        "description": "Serial Data Output in Standard SPI mode; Serial Data Input Output 1 (bidirectional) in Dual SPI (3BH/BBH) and Quad SPI (6BH/EBH/EEH) modes."
      },
      {
        "number": "3",
        "name": "WP#/SIO2",
        "type": "bidirectional",
        "description": "Write Protect input, active low; when BRWD=1 and WP# is LOW the block protect bits and Protection register (A0H) cannot be changed; functions as Serial Data Input Output 2 in Quad SPI mode when QE=1."
      },
      {
        "number": "4",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground reference for all internal circuitry; 0 V."
      },
      {
        "number": "5",
        "name": "HOLD#/SIO3",
        "type": "bidirectional",
        "description": "Hold input, active low, suspends serial communications while CS# is held low without aborting an in-progress write, program, or erase; available only when QE=0; functions as Serial Data Input Output 3 in Quad SPI mode when QE=1."
      },
      {
        "number": "6",
        "name": "SI/SIO0",
        "type": "bidirectional",
        "description": "Serial Data Input in Standard SPI mode, data latched on rising edge of SCLK; Serial Data Input Output 0 (bidirectional) in Dual and Quad SPI modes."
      },
      {
        "number": "7",
        "name": "SCLK",
        "type": "input",
        "description": "Serial Clock input; supports CPOL=0/CPHA=0 (Mode 0) and CPOL=1/CPHA=1 (Mode 3); maximum frequency 133 MHz at 3.3 V (30 pF load), 104 MHz at 1.8 V (30 pF load)."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Power Supply; 1.7 V to 2.0 V for R (1.8 V) variant; 30 mA maximum active current (read/program/erase), 50 µA maximum standby current."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 64,
        "cost_usd": 0.3418,
        "at": "2026-10-01T17:23:18"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589042092094205952",
        "pages": 64,
        "sha256": "404058e4ae70989a",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    }
  },
  "metadata": {
    "specs": {
      "Manufacturer": "GigaDevice Semicon Beijing",
      "Package": "WSON-8-EP(6x8)",
      "Category": "Memory",
      "Pins": "9"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "gd5f1gq5reyigr"
  ],
  "discovery_pitch": "GD5F1GQ5REYIGR (GigaDevice Semicon Beijing) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "gd5f1gq5reyigr.kicad_sym",
    "gd5f1gq5reyigr.kicad_mod",
    "gd5f1gq5reyigr.glb",
    "gd5f1gq5reyigr.step",
    "gd5f1gq5reyigr.lbr",
    "docs/hero.png",
    "docs/gd5f1gq5reyigr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  }
}