Generated by kicad-footprint-generator · KiCad file format 20260206
GD32F450VIT6
GigaDevice Semicon Beijing · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-100(14x14)
GD32F450VIT6 from GigaDevice Semicon Beijing, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | Default function PE2 with alternates TRACECLK, SPI3_SCK, ETH_MII_TXD3, EXMC_A23 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 2 | PE3 | bidirectional | Default function PE3 with alternates TRACED0, EXMC_A19 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 3 | PE4 | bidirectional | Default function PE4 with alternates TRACED1, SPI3_NSS, EXMC_A20, DCI_D4, TLI_B0 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 4 | PE5 | bidirectional | Default function PE5 with alternates TRACED2, TIMER8_CH0, SPI3_MISO, EXMC_A21, DCI_D6, TLI_G0 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 5 | PE6 | bidirectional | Default function PE6 with alternates TRACED3, TIMER8_CH1, SPI3_MOSI, EXMC_A22, DCI_D7, TLI_G1 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 6 | VBAT | power_in | Default function VBAT; the block diagram labels one domain as powered by VBAT, and no voltage limit is given in the pin table. |
| 7 | PC13-TAMPER-RTC | bidirectional | Default function PC13 with additional RTC_TAMP0, RTC_OUT and RTC_TS functions and alternate EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 8 | PC14-OSC32_IN | bidirectional | Default function PC14 with additional function OSC32IN and alternate EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 9 | PC15-OSC32_OUT | bidirectional | Default function PC15 with additional function OSC32OUT and alternate EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 10 | VSS | power_in | Ground pin (default function VSS). |
| 11 | VDD | power_in | Digital supply pin (default function VDD). |
| 12 | PH0-OSC_IN | bidirectional | Default function PH0 with additional function OSCIN and alternate EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 13 | PH1-OSC_OUT | bidirectional | Default function PH1 with additional function OSCOUT and alternate EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 14 | NRST | input | Reset pin (default function NRST); the pin definition table gives no electrical limits for it. |
| 15 | PC0 | bidirectional | Default function PC0 with alternates USBHS_ULPI_STP, EXMC_SDNWE and EVENTOUT, and additional ADC012_IN10; I/O level is 5 V tolerant (5VT). |
| 16 | PC1 | bidirectional | Default function PC1 with alternates SPI2_MOSI/I2S2_SD, SPI1_MOSI/I2S1_SD, ETH_MDC and EVENTOUT, and additional ADC012_IN11; I/O level is 5 V tolerant (5VT). |
| 17 | PC2 | bidirectional | Default function PC2 with alternates SPI1_MISO, I2S1_ADD_SD, USBHS_ULPI_DIR, ETH_MII_TXD2, EXMC_SDNE0 and EVENTOUT, and additional ADC012_IN12; I/O level is 5 V tolerant (5VT). |
| 18 | PC3 | bidirectional | Default function PC3 with alternates SPI1_MOSI, I2S1_SD, USBHS_ULPI_NXT, ETH_MII_TX_CLK, EXMC_SDCKE0 and EVENTOUT, and additional ADC012_IN13; I/O level is 5 V tolerant (5VT). |
| 19 | VDD | power_in | Digital supply pin (default function VDD). |
| 20 | VSSA | power_in | Analog ground pin (default function VSSA). |
| 21 | VREF+ | power_in | Analog reference positive pin (default function VREF+). |
| 22 | VDDA | power_in | Analog supply pin (default function VDDA); the block diagram shows the SAR ADC and DAC powered by VDDA. |
| 23 | PA0-WKUP | bidirectional | Default function PA0 with alternates TIMER1_CH0, TIMER1_ETI, TIMER4_CH0, TIMER7_ETI, USART1_CTS, UART3_TX, ETH_MII_CRS and EVENTOUT, and additional ADC012_IN0 and WKUP; I/O level is 5 V tolerant (5VT). |
| 24 | PA1 | bidirectional | Default function PA1 with alternates TIMER1_CH1, TIMER4_CH1, SPI3_MOSI, USART1_RTS, UART3_RX, ETH_MII_RX_CLK/ETH_RMII_REF_CLK and EVENTOUT, and additional ADC012_IN1; I/O level is 5 V tolerant (5VT). |
| 25 | PA2 | bidirectional | Default function PA2 with alternates TIMER1_CH2, TIMER4_CH2, TIMER8_CH0, I2S_CKIN, USART1_TX, ETH_MDIO and EVENTOUT, and additional ADC012_IN2; I/O level is 5 V tolerant (5VT). |
| 26 | PA3 | bidirectional | Default function PA3 with alternates TIMER1_CH3, TIMER4_CH3, TIMER8_CH1, I2S1_MCK, USART1_RX, USBHS_ULPI_D0, ETH_MII_COL, TLI_B5 and EVENTOUT, and additional ADC012_IN3; I/O level is 5 V tolerant (5VT). |
| 27 | VSS | power_in | Ground pin (default function VSS). |
| 28 | VDD | power_in | Digital supply pin (default function VDD). |
| 29 | PA4 | bidirectional | Default function PA4 with alternates SPI0_NSS, SPI2_NSS/I2S2_WS, USART1_CK, USBHS_SOF, DCI_HSYNC, TLI_VSYNC and EVENTOUT, and additional ADC01_IN4 and DAC_OUT0; I/O level is TTa. |
| 30 | PA5 | bidirectional | Default function PA5 with alternates TIMER1_CH0/TIMER1_ETI, TIMER7_CH0_ON, SPI0_SCK, USBHS_ULPI_CK and EVENTOUT, and additional ADC01_IN5 and DAC_OUT1; I/O level is TTa. |
| 31 | PA6 | bidirectional | Default function PA6 with alternates TIMER0_BRKIN, TIMER2_CH0, TIMER7_BRKIN, SPI0_MISO, I2S1_MCK, TIMER12_CH0, SDIO_CMD, DCI_PIXCLK, TLI_G2 and EVENTOUT, and additional ADC01_IN6; I/O level is 5 V tolerant (5VT). |
| 32 | PA7 | bidirectional | Default function PA7 with alternates TIMER0_CH0_ON, TIMER2_CH1, TIMER7_CH0_ON, SPI0_MOSI, TIMER13_CH0, ETH_MII_RX_DV/ETH_RMII_CRS_DV, EXMC_SDNWE and EVENTOUT, and additional ADC01_IN7; I/O level is 5 V tolerant (5VT). |
| 33 | PC4 | bidirectional | Default function PC4 with alternates ETH_MII_RXD0/ETH_RMII_RXD0, EXMC_SDNE0 and EVENTOUT, and additional ADC01_IN14; I/O level is 5 V tolerant (5VT). |
| 34 | PC5 | bidirectional | Default function PC5 with alternates USART2_RX, ETH_MII_RXD1/ETH_RMII_RXD1, EXMC_SDCKE0 and EVENTOUT, and additional ADC01_IN15; I/O level is 5 V tolerant (5VT). |
| 35 | PB0 | bidirectional | Default function PB0 with alternates TIMER0_CH1_ON, TIMER2_CH2, TIMER7_CH1_ON, SPI4_SCK, SPI2_MOSI/I2S2_SD, TLI_R3, USBHS_ULPI_D1, ETH_MII_RXD2, SDIO_D1 and EVENTOUT, and additional ADC01_IN8 and IREF; I/O level is 5 V tolerant (5VT). |
| 36 | PB1 | bidirectional | Default function PB1 with alternates TIMER0_CH2_ON, TIMER2_CH3, TIMER7_CH2_ON, SPI4_NSS, TLI_R6, USBHS_ULPI_D2, ETH_MII_RXD3, SDIO_D2 and EVENTOUT, and additional ADC01_IN9; I/O level is 5 V tolerant (5VT). |
| 37 | PB2 | bidirectional | Default function PB2 (also BOOT1) with alternates TIMER1_CH3, SPI2_MOSI/I2S2_SD, USBHS_ULPI_D4, SDIO_CK and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 38 | PE7 | bidirectional | Default function PE7 with alternates TIMER0_ETI, UART6_RX, EXMC_D4 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 39 | PE8 | bidirectional | Default function PE8 with alternates TIMER0_CH0_ON, UART6_TX, EXMC_D5 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 40 | PE9 | bidirectional | Default function PE9 with alternates TIMER0_CH0, EXMC_D6 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 41 | PE10 | bidirectional | Default function PE10 with alternates TIMER0_CH1_ON, EXMC_D7 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 42 | PE11 | bidirectional | Default function PE11 with alternates TIMER0_CH1, SPI3_NSS, SPI4_NSS, EXMC_D8, TLI_G3 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 43 | PE12 | bidirectional | Default function PE12 with alternates TIMER0_CH2_ON, SPI3_SCK, SPI4_SCK, EXMC_D9, TLI_B4 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 44 | PE13 | bidirectional | Default function PE13 with alternates TIMER0_CH2, SPI3_MISO, SPI4_MISO, EXMC_D10, TLI_DE and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 45 | PE14 | bidirectional | Default function PE14 with alternates TIMER0_CH3, SPI3_MOSI, SPI4_MOSI, EXMC_D11, TLI_PIXCLK and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 46 | PE15 | bidirectional | Default function PE15 with alternates TIMER0_BRKIN, EXMC_D12, TLI_R7 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 47 | PB10 | bidirectional | Default function PB10 with alternates TIMER1_CH2, I2C1_SCL, SPI1_SCK/I2S1_CK, I2S2_MCK, USART2_TX, USBHS_ULPI_D3, ETH_MII_RX_ER, SDIO_D7, TLI_G4 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 48 | PB11 | bidirectional | Default function PB11 with alternates TIMER1_CH3, I2C1_SDA, I2S_CKIN, USART2_RX, USBHS_ULPI_D4, ETH_MII_TX_EN/ETH_RMII_TX_EN, TLI_G5 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 49 | NC | unconnected | Pin printed as NC in the LQFP100 pin table, with default function VCORE listed as a power pin. |
| 50 | VDD | power_in | Digital supply pin (default function VDD). |
| 51 | PB12 | bidirectional | Default function PB12 with alternates TIMER0_BRKIN, I2C1_SMBA, SPI1_NSS/I2S1_WS, SPI3_NSS, USART2_CK, CAN1_RX, USBHS_ULPI_D5, ETH_MII_TXD0/ETH_RMII_TXD0, USBHS_ID and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 52 | PB13 | bidirectional | Default function PB13 with alternates TIMER0_CH0_ON, I2C1_TXFRAME, SPI1_SCK/I2S1_CK, SPI3_SCK, USART2_CTS, CAN1_TX, USBHS_ULPI_D6, ETH_MII_TXD1/ETH_RMII_TXD1 and EVENTOUT, and additional USBHS_VBUS; I/O level is 5 V tolerant (5VT). |
| 53 | PB14 | bidirectional | Default function PB14 with alternates TIMER0_CH1_ON, TIMER7_CH1_ON, SPI1_MISO, I2S1_ADD_SD, USART2_RTS, TIMER11_CH0, USBHS_DM and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 54 | PB15 | bidirectional | Default function PB15 with alternates RTC_REFIN, TIMER0_CH2_ON, TIMER7_CH2_ON, SPI1_MOSI/I2S1_SD, TIMER11_CH1, USBHS_DP and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 55 | PD8 | bidirectional | Default function PD8 with alternates USART2_TX, EXMC_D13 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 56 | PD9 | bidirectional | Default function PD9 with alternates USART2_RX, EXMC_D14 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 57 | PD10 | bidirectional | Default function PD10 with alternates USART2_CK, EXMC_D15, TLI_B3 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 58 | PD11 | bidirectional | Default function PD11 with alternates USART2_CTS, EXMC_A16 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 59 | PD12 | bidirectional | Default function PD12 with alternates TIMER3_CH0, USART2_RTS, EXMC_A17 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 60 | PD13 | bidirectional | Default function PD13 with alternates TIMER3_CH1, EXMC_A18 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 61 | PD14 | bidirectional | Default function PD14 with alternates TIMER3_CH2, EXMC_D0 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 62 | PD15 | bidirectional | Default function PD15 with alternates CTC_SYNC, TIMER3_CH3, EXMC_D1 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 63 | PC6 | bidirectional | Default function PC6 with alternates TIMER2_CH0, TIMER7_CH0, I2S1_MCK, USART5_TX, SDIO_D6, DCI_D0, TLI_HSYNC and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 64 | PC7 | bidirectional | Default function PC7 with alternates TIMER2_CH1, TIMER7_CH1, SPI1_SCK/I2S1_CK, I2S2_MCK, USART5_RX, SDIO_D7, DCI_D1, TLI_G6 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 65 | PC8 | bidirectional | Default function PC8 with alternates TRACED0, TIMER2_CH2, TIMER7_CH2, USART5_CK, SDIO_D0, DCI_D2 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 66 | PC9 | bidirectional | Default function PC9 with alternates CK_OUT1, TIMER2_CH3, TIMER7_CH3, I2C2_SDA, I2S_CKIN, SDIO_D1, DCI_D3 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 67 | PA8 | bidirectional | Default function PA8 with alternates CK_OUT0, TIMER0_CH0, I2C2_SCL, USART0_CK, CTC_SYNC, USBFS_SOF, SDIO_D1, TLI_R6 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 68 | PA9 | bidirectional | Default function PA9 with alternates TIMER0_CH1, I2C2_SMBA, SPI1_SCK/I2S1_CK, USART0_TX, SDIO_D2, DCI_D0 and EVENTOUT, and additional USBFS_VBUS; I/O level is 5 V tolerant (5VT). |
| 69 | PA10 | bidirectional | Default function PA10 with alternates TIMER0_CH2, I2C2_TXFRAME, SPI4_MOSI, USART0_RX, USBFS_ID, DCI_D1 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 70 | PA11 | bidirectional | Default function PA11 with alternates TIMER0_CH3, SPI3_MISO, USART0_CTS, USART5_TX, CAN0_RX, USBFS_DM, TLI_R4 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 71 | PA12 | bidirectional | Default function PA12 with alternates TIMER0_ETI, SPI4_MISO, USART0_RTS, USART5_RX, CAN0_TX, USBFS_DP, TLI_R5 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 72 | PA13 | bidirectional | Default function JTMS/SWDIO (PA13) with alternate EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 73 | NC | unconnected | Pin printed as NC in the LQFP100 pin table with no default or alternate function listed. |
| 74 | VSS | power_in | Ground pin (default function VSS). |
| 75 | VDD | power_in | Digital supply pin (default function VDD). |
| 76 | PA14 | bidirectional | Default function JTCK/SWCLK (PA14) with alternate EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 77 | PA15 | bidirectional | Default function JTDI (PA15) with alternates TIMER1_CH0/TIMER1_ETI, SPI0_NSS, SPI2_NSS/I2S2_WS, USART0_TX and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 78 | PC10 | bidirectional | Default function PC10 with alternates SPI2_SCK/I2S2_CK, USART2_TX, UART3_TX, SDIO_D2, DCI_D8, TLI_R2 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 79 | PC11 | bidirectional | Default function PC11 with alternates I2S2_ADD_SD, SPI2_MISO, USART2_RX, UART3_RX, SDIO_D3, DCI_D4 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 80 | PC12 | bidirectional | Default function PC12 with alternates I2C1_SDA, SPI2_MOSI/I2S2_SD, USART2_CK, UART4_TX, SDIO_CK, DCI_D9 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 81 | PD0 | bidirectional | Default function PD0 with alternates SPI3_MISO, SPI2_MOSI/I2S2_SD, CAN0_RX, EXMC_D2 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 82 | PD1 | bidirectional | Default function PD1 with alternates SPI1_NSS/I2S1_WS, CAN0_TX, EXMC_D3 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 83 | PD2 | bidirectional | Default function PD2 with alternates TIMER2_ETI, UART4_RX, SDIO_CMD, DCI_D11 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 84 | PD3 | bidirectional | Default function PD3 with alternates TRACED1, SPI1_SCK/I2S1_CK, USART1_CTS, EXMC_CLK, DCI_D5, TLI_G7 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 85 | PD4 | bidirectional | Default function PD4 with alternates USART1_RTS, EXMC_NOE and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 86 | PD5 | bidirectional | Default function PD5 with alternates USART1_TX, EXMC_NWE and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 87 | PD6 | bidirectional | Default function PD6 with alternates SPI2_MOSI/I2S2_SD, USART1_RX, EXMC_NWAIT, DCI_D10, TLI_B2 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 88 | PD7 | bidirectional | Default function PD7 with alternates USART1_CK, EXMC_NE0/EXMC_NCE1 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 89 | PB3 | bidirectional | Default function JTDO/TRACESWO (PB3) with alternates TIMER1_CH1, SPI0_SCK, SPI2_SCK/I2S2_CK, USART0_RX, I2C1_SDA and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 90 | PB4 | bidirectional | Default function JNTRST (PB4) with alternates TIMER2_CH0, SPI0_MISO, SPI2_MISO, I2S2_ADD_SD, I2C2_SDA, SDIO_D0, I2C0_TXFRAME and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 91 | PB5 | bidirectional | Default function PB5 with alternates TIMER2_CH1, I2C0_SMBA, SPI0_MOSI, SPI2_MOSI/I2S2_SD, CAN1_RX, USBHS_ULPI_D7, ETH_PPS_OUT, EXMC_SDCKE1, DCI_D10 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 92 | PB6 | bidirectional | Default function PB6 with alternates TIMER3_CH0, I2C0_SCL, USART0_TX, CAN1_TX, EXMC_SDNE1, DCI_D5 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 93 | PB7 | bidirectional | Default function PB7 with alternates TIMER3_CH1, I2C0_SDA, USART0_RX, EXMC_NL, DCI_VSYNC and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 94 | BOOT0 | bidirectional | Default function BOOT0; the pin table lists it as I/O with 5 V tolerant level (5VT). |
| 95 | PB8 | bidirectional | Default function PB8 with alternates TIMER1_CH0/TIMER1_ETI, TIMER3_CH2, TIMER9_CH0, I2C0_SCL, SPI4_MOSI, CAN0_RX, ETH_MII_TXD3, SDIO_D4, DCI_D6, TLI_B6 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 96 | PB9 | bidirectional | Default function PB9 with alternates TIMER1_CH1, TIMER3_CH3, TIMER10_CH0, I2C0_SDA, SPI1_NSS/I2S1_WS, CAN0_TX, SDIO_D5, DCI_D7, TLI_B7 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 97 | PE0 | bidirectional | Default function PE0 with alternates TIMER3_ETI, UART7_RX, EXMC_NBL0, DCI_D2 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 98 | PE1 | bidirectional | Default function PE1 with alternates TIMER0_CH1_ON, UART7_TX, EXMC_NBL1, DCI_D3 and EVENTOUT; I/O level is 5 V tolerant (5VT). |
| 99 | VSS | power_in | Ground pin (default function VSS). |
| 100 | VDD | power_in | Digital supply pin (default function VDD). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GigaDevice Semicon Beijing |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage on other I/O | VIN | 4 | V | 49 | |||
| Maximum current for GPIO pins | IIO | 25 | mA | 49 | |||
| Operating temperature range | TA | -40 | 85 | °C | 49 | ||
| Storage temperature range | TSTG | -55 | 150 | °C | 49 | ||
| Maximum junction temperature | TJ | 125 | °C | 49 | |||
| Supply voltage | VDD | 2.6 | 3.3 | 3.6 | V | 49 | |
| Analog supply voltage | VDDA | 2.6 | 3.3 | 3.6 | V | Same as VDD | 49 |
| Battery supply voltage | VBAT | 1.8 | 3.6 | V | 49 | ||
| Power on reset threshold | VPOR | 2.3 | 2.4 | 2.48 | V | 52 | |
| Power down reset threshold | VPDR | 1.72 | 1.8 | 1.88 | V | 52 | |
| Electrostatic discharge voltage (human body model) | VESD(HBM) | 7000 | V | TA=25 °C; JESD22-A114 | 52 | ||
| Electrostatic discharge voltage (charge device model) | VESD(CDM) | 800 | V | TA=25 °C; JESD22-C101 | 52 | ||
| Static latch-up I-test | LU I-test | -200 | 200 | mA | TA=25 °C; JESD78 | 52 | |
| Vsupply over voltage | 5.4 | V | 52 | ||||
| High Speed External oscillator (HXTAL) frequency | fHXTAL | 4 | 8 | 32 | MHz | VDD=5.0V | 53 |
| Recommended load capacitance on OSC_IN and OSC_OUT | CHXTAL | 20 | 30 | pF | 53 | ||
| HXTAL oscillator duty cycle | DHXTAL | 30 | 50 | 70 | % | 53 | |
| Recommended load capacitance on OSC32_IN and OSC32_OUT | CLXTAL | 15 | pF | 53 | |||
| LXTAL oscillator duty cycle | DLXTAL | 30 | 50 | 70 | % | 53 | |
| IRC16M oscillator frequency accuracy, factory-trimmed | ACCIRC16M | -4 | 5 | % | VDD=3.3V, TA=-40°C ~+105°C | 54 | |
| IRC16M oscillator frequency accuracy, factory-trimmed | ACCIRC16M | -2 | 2 | % | VDD=3.3V, TA=0°C ~ +85°C | 54 | |
| IRC16M oscillator frequency accuracy, factory-trimmed | ACCIRC16M | -1 | 1 | % | VDD=3.3V, TA=25°C | 54 | |
| IRC48M oscillator frequency accuracy, factory-trimmed | ACCIRC48M | -4 | 5 | % | VDD=3.3V, TA=-40°C ~+105°C | 54 | |
| IRC48M oscillator frequency accuracy, factory-trimmed | ACCIRC48M | -3 | 3 | % | VDD=3.3V, TA=0°C ~ +85°C | 54 | |
| IRC48M oscillator frequency accuracy, factory-trimmed | ACCIRC48M | -2 | 2 | % | VDD=3.3V, TA=25°C | 54 | |
| Low speed internal oscillator (IRC32K) frequency | fIRC32K | 20 | 32 | 45 | KHz | VDD=VBAT=3.3V, TA=-40°C ~ +85°C | 55 |
| PLL input clock frequency | fPLLIN | 1 | 4 | MHz | 55 | ||
| PLL output clock frequency | fPLL | 100 | 500 | MHz | 55 | ||
| PLL lock time | tLOCK | 80 | 200 | μs | VCO freq=100MHz | 55 | |
| PLL lock time | tLOCK | 100 | 300 | μs | VCO freq=500MHz | 55 | |
| Number of guaranteed program/erase cycles before failure (Endurance) | PECYC | 100 | kcycles | TA=-40°C ~ +85°C | 56 | ||
| Data retention time | tRET | 20 | years | TA=125°C | 56 | ||
| Word programming time | tPROG | 200 | 400 | us | TA=-40°C ~ +85°C | 56 | |
| Page erase time | tERASE | 60 | 100 | 450 | ms | TA=-40°C ~ +85°C | 56 |
| Mass erase time | tMERASE | 3.2 | 9.6 | s | TA=-40°C ~ +85°C | 56 | |
| High Voltage tolerant IO Low level input voltage | VIL | 1.27 | V | VDD=2.6V | 57 | ||
| High Voltage tolerant IO Low level input voltage | VIL | 1.58 | V | VDD=3.3V | 57 | ||
| High Voltage tolerant IO Low level input voltage | VIL | 1.71 | V | VDD=3.6V | 57 | ||
| High Voltage tolerant IO High level input voltage | VIH | 1.4 | V | VDD=2.6V | 57 | ||
| High Voltage tolerant IO High level input voltage | VIH | 1.71 | V | VDD=3.3V | 57 | ||
| High Voltage tolerant IO High level input voltage | VIH | 1.84 | V | VDD=3.6V | 57 | ||
| Low level output voltage | VOL | 0.17 | V | VDD=2.6V, IIO=8mA | 57 | ||
| Low level output voltage | VOL | 0.16 | V | VDD=3.3V, IIO=8mA | 57 | ||
| High level output voltage | VOH | 2.39 | V | VDD=2.6V, IIO=8mA | 57 | ||
| High level output voltage | VOH | 3.12 | V | VDD=3.3V, IIO=8mA | 57 | ||
| High level output voltage | VOH | 3.41 | V | VDD=3.6V, IIO=8mA | 57 | ||
| Internal pull-up resistor | RPU | 30 | 40 | 50 | kΩ | VIN=VSS | 57 |
| Internal pull-down resistor | RPD | 30 | 40 | 50 | kΩ | VIN=VDD | 57 |
| ADC operating voltage | VDDA | 2.6 | 3.3 | 3.6 | V | 58 | |
| ADC clock | fADC | 0.1 | 40 | MHz | 58 | ||
| Sampling rate | fS | 0.007 | 2.6 | MSPS | 12-bit | 58 | |
| External input impedance | RAIN | 52.1 | kΩ | See Equation 2 | 58 | ||
| Sampling time | ts | 0.075 | 12 | μs | fADC=40MHz | 58 | |
| Resistive load | RLOAD | 5 | kΩ | Resistive load with buffer ON | 60 | ||
| Settling time | TSETTLING | 0.5 | 1 | μs | CLOAD≤50pF, RLOAD≥5kΩ | 60 | |
| SCK clock frequency | fSCK | 30 | MHz | 61 | |||
| USART SCK clock frequency | fSCK | 36 | MHz | 61 |
CAD (KiCad official)
- Symbol:
GD32F450VIT6 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
gd32f450vit6-etched.step/gd32f450vit6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gd32f450vit6.step/gd32f450vit6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GigaDevice Semicon Beijing datasheet (66 pp, sha256
915c24a1f84de32a, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).