Generated by kicad-footprint-generator · KiCad file format 20260206
GD32F403RET6
GigaDevice Semicon Beijing · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-64(10x10)
GD32F403RET6 from GigaDevice Semicon Beijing, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Backup power supply input for the RTC and backup domain, as defined in the LQFP64 pin definition table. |
| 2 | PC13-TAMPER-RTC | bidirectional | 5 V tolerant? Not marked; default GPIO PC13 with alternate function TAMPER-RTC. |
| 3 | PC14-OSC32IN | bidirectional | Default GPIO PC14 with alternate function OSC32IN for the low-speed oscillator input. |
| 4 | PC15-OSC32OUT | bidirectional | Default GPIO PC15 with alternate function OSC32OUT for the low-speed oscillator output. |
| 5 | OSCIN | input | High-speed crystal oscillator input, remappable to PD0; PD0/PD1 cannot be used for EXTI in this package. |
| 6 | OSCOUT | output | High-speed crystal oscillator output, remappable to PD1; PD0/PD1 cannot be used for EXTI in this package. |
| 7 | NRST | bidirectional | Active-low reset pin, as listed in the LQFP64 pin definition table. |
| 8 | PC0 | bidirectional | GPIO PC0 with alternate function ADC012_IN10. |
| 9 | PC1 | bidirectional | GPIO PC1 with alternate function ADC012_IN11. |
| 10 | PC2 | bidirectional | GPIO PC2 with alternate function ADC012_IN12. |
| 11 | PC3 | bidirectional | GPIO PC3 with alternate function ADC012_IN13. |
| 12 | VSSA | power_in | Analog ground for the ADC and analog circuitry. |
| 13 | VDDA | power_in | Analog supply for the ADC, DAC and analog circuitry. |
| 14 | PA0-WKUP | bidirectional | GPIO PA0 with alternate functions WKUP, USART1_CTS, ADC012_IN0 and TIMER7_ETI. |
| 15 | PA1 | bidirectional | GPIO PA1 with alternate functions USART1_RTS and ADC012_IN1. |
| 16 | PA2 | bidirectional | GPIO PA2 with alternate functions USART1_TX, ADC012_IN2, TIMER8_CH0 and SPI0_IO2. |
| 17 | PA3 | bidirectional | GPIO PA3 with alternate functions USART1_RX, ADC012_IN3, TIMER8_CH1 and SPI0_IO3. |
| 18 | VSS_4 | power_in | Digital ground pin. |
| 19 | VDD_4 | power_in | Digital supply pin. |
| 20 | PA4 | bidirectional | GPIO PA4 with alternate functions SPI0_NSS, USART1_CK, ADC01_IN4 and DAC_OUT0, remappable to SPI2_NSS and I2S2_WS. |
| 21 | PA5 | bidirectional | GPIO PA5 with alternate functions SPI0_SCK, ADC01_IN5 and DAC_OUT1. |
| 22 | PA6 | bidirectional | GPIO PA6 with alternate functions SPI0_MISO, ADC01_IN6, TIMER2_CH0, TIMER7_BRKIN and TIMER12_CH0, remappable to TIMER0_BRKIN. |
| 23 | PA7 | bidirectional | GPIO PA7 with alternate functions SPI0_MOSI, ADC01_IN7, TIMER2_CH1, TIMER7_CH0_ON and TIMER13_CH0, remappable to TIMER0_CH0_ON. |
| 24 | PC4 | bidirectional | GPIO PC4 with alternate function ADC01_IN14. |
| 25 | PC5 | bidirectional | GPIO PC5 with alternate function ADC01_IN15. |
| 26 | PB0 | bidirectional | GPIO PB0 with alternate functions ADC01_IN8, TIMER2_CH2 and TIMER7_CH1_ON, remappable to TIMER0_CH1_ON. |
| 27 | PB1 | bidirectional | GPIO PB1 with alternate functions ADC01_IN9, TIMER2_CH3 and TIMER7_CH2_ON, remappable to TIMER0_CH2_ON. |
| 28 | PB2 | bidirectional | 5 V tolerant GPIO PB2 which also serves as BOOT1. |
| 29 | PB10 | bidirectional | 5 V tolerant GPIO PB10 with alternate functions I2C1_SCL and USART2_TX. |
| 30 | PB11 | bidirectional | 5 V tolerant GPIO PB11 with alternate functions I2C1_SDA and USART2_RX. |
| 31 | VSS_1 | power_in | Digital ground pin. |
| 32 | VDD_1 | power_in | Digital supply pin. |
| 33 | PB12 | bidirectional | 5 V tolerant GPIO PB12 with alternate functions SPI1_NSS, I2C1_SMBA, USART2_CK, TIMER0_BRKIN, I2S1_WS and CAN1_RX. |
| 34 | PB13 | bidirectional | 5 V tolerant GPIO PB13 with alternate functions SPI1_SCK, USART2_CTS, TIMER0_CH0_ON, I2S1_CK and CAN1_TX. |
| 35 | PB14 | bidirectional | 5 V tolerant GPIO PB14 with alternate functions SPI1_MISO, USART2_RTS, TIMER0_CH1_ON and TIMER11_CH0. |
| 36 | PB15 | bidirectional | 5 V tolerant GPIO PB15 with alternate functions SPI1_MOSI, TIMER0_CH2_ON, I2S1_SD and TIMER11_CH1. |
| 37 | PC6 | bidirectional | 5 V tolerant GPIO PC6 with alternate functions I2S1_MCK, TIMER7_CH0 and SDIO_D6, remappable to TIMER2_CH0. |
| 38 | PC7 | bidirectional | 5 V tolerant GPIO PC7 with alternate functions I2S2_MCK, TIMER7_CH1 and SDIO_D7, remappable to TIMER2_CH1. |
| 39 | PC8 | bidirectional | 5 V tolerant GPIO PC8 with alternate functions TIMER7_CH2 and SDIO_D0, remappable to TIMER2_CH2. |
| 40 | PC9 | bidirectional | 5 V tolerant GPIO PC9 with alternate functions TIMER7_CH3 and SDIO_D1, remappable to TIMER2_CH3. |
| 41 | PA8 | bidirectional | 5 V tolerant GPIO PA8 with alternate functions USART0_CK, TIMER0_CH0, CK_OUT0, USBFS_SOF and CTC_SYNC. |
| 42 | PA9 | bidirectional | 5 V tolerant GPIO PA9 with alternate functions USART0_TX, TIMER0_CH1 and USBFS_VBUS. |
| 43 | PA10 | bidirectional | 5 V tolerant GPIO PA10 with alternate functions USART0_RX, TIMER0_CH2 and USBFS_ID. |
| 44 | PA11 | bidirectional | 5 V tolerant GPIO PA11 with alternate functions USART0_CTS, CAN0_RX, USBFS_DM and TIMER0_CH3. |
| 45 | PA12 | bidirectional | 5 V tolerant GPIO PA12 with alternate functions USART0_RTS, CAN0_TX, TIMER0_ETI and USBFS_DP. |
| 46 | PA13 | bidirectional | 5 V tolerant pin defaulting to JTMS/SWDIO, remappable to PA13 GPIO. |
| 47 | VSS_2 | power_in | Digital ground pin. |
| 48 | VDD_2 | power_in | Digital supply pin. |
| 49 | PA14 | bidirectional | 5 V tolerant pin defaulting to JTCK/SWCLK, remappable to PA14 GPIO. |
| 50 | PA15 | bidirectional | 5 V tolerant pin defaulting to JTDI with alternate functions SPI2_NSS and I2S2_WS, remappable to PA15 and SPI0_NSS. |
| 51 | PC10 | bidirectional | 5 V tolerant GPIO PC10 with alternate functions UART3_TX and SDIO_D2, remappable to USART2_TX, SPI2_SCK and I2S2_CK. |
| 52 | PC11 | bidirectional | 5 V tolerant GPIO PC11 with alternate functions UART3_RX and SDIO_D3, remappable to USART2_RX and SPI2_MISO. |
| 53 | PC12 | bidirectional | 5 V tolerant GPIO PC12 with alternate functions UART4_TX and SDIO_CK, remappable to USART2_CK, SPI2_MOSI and I2S2_SD. |
| 54 | PD2 | bidirectional | 5 V tolerant GPIO PD2 with alternate functions TIMER2_ETI, SDIO_CMD and UART4_RX. |
| 55 | PB3 | bidirectional | 5 V tolerant pin defaulting to JTDO with alternate functions SPI2_SCK and I2S2_CK, remappable to PB3, TRACESWO and SPI0_SCK. |
| 56 | PB4 | bidirectional | 5 V tolerant pin defaulting to NJTRST with alternate function SPI2_MISO, remappable to TIMER2_CH0, PB4 and SPI0_MISO. |
| 57 | PB5 | bidirectional | GPIO PB5 with alternate functions I2C0_SMBA, SPI2_MOSI and I2S2_SD, remappable to TIMER2_CH1, SPI0_MOSI and CAN1_RX. |
| 58 | PB6 | bidirectional | 5 V tolerant GPIO PB6 with alternate functions I2C0_SCL and TIMER3_CH0, remappable to USART0_TX, SPI0_IO2 and CAN1_TX. |
| 59 | PB7 | bidirectional | 5 V tolerant GPIO PB7 with alternate functions I2C0_SDA and TIMER3_CH1, remappable to USART0_RX and SPI0_IO3. |
| 60 | BOOT0 | input | Boot mode selection input pin, as listed in the LQFP64 pin definition table. |
| 61 | PB8 | bidirectional | 5 V tolerant GPIO PB8 with alternate functions TIMER3_CH2, SDIO_D4 and TIMER9_CH0, remappable to I2C0_SCL and CAN0_RX. |
| 62 | PB9 | bidirectional | 5 V tolerant GPIO PB9 with alternate functions TIMER3_CH3, SDIO_D5 and TIMER10_CH0, remappable to I2C0_SDA and CAN0_TX. |
| 63 | VSS_3 | power_in | Digital ground pin. |
| 64 | VDD_3 | power_in | Digital supply pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GigaDevice Semicon Beijing |
| Package | LQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 2.6 | 3.3 | 3.6 | V | 55 | |
| Analog supply voltage | VDDA | 2.6 | 3.3 | 3.6 | V | Same as VDD | 55 |
| Battery supply voltage | VBAT | 1.8 | 3.6 | V | 55 | ||
| AHB clock frequency | fHCLK | 168 | MHz | 55 | |||
| APB1 clock frequency | fAPB1 | 84 | MHz | 55 | |||
| APB2 clock frequency | fAPB2 | 168 | MHz | 55 | |||
| Operating temperature range | TA | -40 | 85 | °C | 54 | ||
| Storage temperature range | TSTG | -55 | 150 | °C | 54 | ||
| Maximum junction temperature | TJ | 125 | °C | 54 | |||
| Maximum current for GPIO pins | IIO | -25 | 25 | mA | 54 | ||
| Variations between different VDD power pins | /ΔVDDX/ | 50 | mV | 54 | |||
| Variations between different ground pins | /VSSX −VSS/ | 50 | mV | 54 | |||
| Electrostatic discharge voltage (human body model) | VESD(HBM) | 4000 | V | TA = 25 °C; JESD22-A114 | 65 | ||
| Electrostatic discharge voltage (charge device model) | VESD(CDM) | 800 | V | TA = 25 °C; JESD22-C101 | 65 | ||
| Static latch-up I-test | LU | -200 | 200 | mA | TA = 25 °C; JESD78 | 65 | |
| Vsupply over voltage | 5.4 | V | 65 | ||||
| Crystal or ceramic frequency | fHXTAL | 4 | 8 | 32 | MHz | 2.6 V ≤ VDD ≤ 3.6 V | 65 |
| Recommended matching capacitance on OSCIN and OSCOUT | CHXTAL | 20 | 30 | pF | 65 | ||
| Crystal or ceramic duty cycle | Ducy(HXTAL) | 30 | 50 | 70 | % | 65 | |
| IRC8M oscillator Frequency accuracy, Factory-trimmed | ACCIRC8M | -2.5 | 2.5 | % | VDD = VDDA = 3.3 V, TA = -40 °C ~ +85 °C | 67 | |
| IRC8M oscillator Frequency accuracy, Factory-trimmed | ACCIRC8M | -1.8 | 1.8 | % | VDD = VDDA = 3.3 V, TA = 0 °C ~ +85 °C | 67 | |
| IRC8M oscillator Frequency accuracy, Factory-trimmed | ACCIRC8M | -1 | 1 | % | VDD = VDDA = 3.3 V, TA = 25 °C | 67 | |
| Low Speed Internal oscillator (IRC40K) frequency | fIRC40K | 20 | 40 | 45 | kHz | VDD = VDDA = 3.3 V, TA = -40 °C ~ +85 °C | 68 |
| IRC48M oscillator Frequency accuracy, Factory-trimmed | ACCIRC48M | -4 | 5 | % | VDD = VDDA = 3.3 V, TA = -40 °C ~ +85 °C | 68 | |
| IRC48M oscillator Frequency accuracy, Factory-trimmed | ACCIRC48M | -3 | 3 | % | VDD = VDDA = 3.3 V, TA = 0 °C ~ +85 °C | 68 | |
| IRC48M oscillator Frequency accuracy, Factory-trimmed | ACCIRC48M | -2 | 2 | % | VDD = VDDA = 3.3 V, TA = 25 °C | 68 | |
| PLL input clock frequency | fPLLIN | 1 | 25 | MHz | 69 | ||
| PLL output clock frequency | fPLLOUT | 16 | 168 | MHz | 69 | ||
| PLL VCO output clock frequency | fVCO | 32 | 344 | MHz | 69 | ||
| PLL lock time | tLOCK | 300 | μs | 69 | |||
| I/O low level output voltage for an IO pin (8 mA, VDD 2.6 V) | VOL | 0.17 | V | IIO = +8mA; VDD = 2.6 V | 72 | ||
| I/O low level output voltage for an IO pin (8 mA, VDD 3.3 V) | VOL | 0.16 | V | IIO = +8mA; VDD = 3.3 V | 72 | ||
| I/O low level output voltage for an IO pin (8 mA, VDD 3.6 V) | VOL | 0.15 | V | IIO = +8mA; VDD = 3.6 V | 72 | ||
| I/O high level output voltage for an IO pin (8 mA, VDD 2.6 V) | VOH | 2.4 | V | IIO = +8mA; VDD = 2.6 V | 72 | ||
| I/O high level output voltage for an IO pin (8 mA, VDD 3.3 V) | VOH | 3.15 | V | IIO = +8mA; VDD = 3.3 V | 72 | ||
| I/O high level output voltage for an IO pin (8 mA, VDD 3.6 V) | VOH | 3.44 | V | IIO = +8mA; VDD = 3.6 V | 72 | ||
| I/O low level output voltage for an IO pin (20 mA, VDD 2.6 V) | VOL | 0.49 | V | IIO = +20mA; VDD = 2.6 V | 72 | ||
| I/O low level output voltage for an IO pin (20 mA, VDD 3.3 V) | VOL | 0.4 | V | IIO = +20mA; VDD = 3.3 V | 72 | ||
| I/O low level output voltage for an IO pin (20 mA, VDD 3.6 V) | VOL | 0.34 | V | IIO = +20mA; VDD = 3.6 V | 72 | ||
| I/O high level output voltage for an IO pin (20 mA, VDD 2.6 V) | VOH | 2.02 | V | IIO = +20mA; VDD = 2.6 V | 72 | ||
| I/O high level output voltage for an IO pin (20 mA, VDD 3.3 V) | VOH | 2.8 | V | IIO = +20mA; VDD = 3.3 V | 72 | ||
| I/O high level output voltage for an IO pin (20 mA, VDD 3.6 V) | VOH | 3.15 | V | IIO = +20mA; VDD = 3.6 V | 72 | ||
| Internal pull-up resistor | RPU | 30 | 40 | 50 | kΩ | All pins VIN = VSS | 72 |
| Internal pull-up resistor | RPU | 7.5 | 10 | 13.5 | kΩ | PA10 | 72 |
| Internal pull-down resistor | RPD | 30 | 40 | 50 | kΩ | All pins VIN = VDD | 72 |
| Internal pull-down resistor | RPD | 7.5 | 10 | 13.5 | kΩ | PA10 | 72 |
| ADC operating voltage | VDDA | 2.6 | 3.3 | 3.6 | V | 73 | |
| ADC clock | fADC | 0.1 | 40 | MHz | 73 | ||
| Sampling rate 12-bit | fS | 0.007 | 2.86 | MSPS | 12-bit | 73 | |
| Sampling rate 10-bit | fS | 0.008 | 3.33 | MSPS | 10-bit | 73 | |
| Sampling rate 8-bit | fS | 0.01 | 4 | MSPS | 8-bit | 73 | |
| Sampling rate 6-bit | fS | 0.012 | 5 | MSPS | 6-bit | 73 | |
| External input impedance | RAIN | 32.9 | kΩ | See Equation 1 | 73 | ||
| Input sampling capacitance | CADC | 5.5 | pF | No pin/pad capacitance included | 73 | ||
| Sampling time | ts | 0.0375 | 5.99 | μs | fADC = 40 MHz | 73 | |
| Startup time | tSU | 1 | μs | 73 | |||
| VSENSE linearity with temperature | TL | -1.5 | 1.5 | ℃ | 74 | ||
| DAC operating voltage | VDDA | 2.6 | 3.3 | 3.6 | V | 75 | |
| Resistive load with buffer ON | RLOAD | 5 | kΩ | 75 | |||
| Impedance output with buffer OFF | Ro | 15 | kΩ | 75 | |||
| Load capacitance | CLOAD | 50 | pF | No pin/pad capacitance included | 75 | ||
| Settling time | Tsetting | 0.3 | 1 | μs | CLOAD ≤ 50 pF, RLOAD ≥ 5 kΩ | 75 | |
| Wakeup from off state | Twakeup | 5 | 10 | μs | 75 | ||
| Max frequency for a correct update rate | Update rate | 4 | MS/s | CLOAD ≤ 50 pF, RLOAD ≥ 5 kΩ | 75 | ||
| Differential non-linearity error | DNL | -3 | 3 | LSB | DAC in 12-bit mode | 75 | |
| Integral non-linearity | INL | -4 | 4 | LSB | DAC in 12-bit mode | 75 | |
| Offset error | Offset | -12 | 12 | LSB | DAC in 12-bit mode | 75 | |
| Gain error | GE | -0.5 | 0.5 | % | DAC in 12-bit mode | 75 | |
| SPI/USART SCK clock frequency | fSCK | 84 | MHz | fPCLKx = 168 MHz | 78 |
CAD (KiCad official)
- Symbol:
GD32F403RET6 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
gd32f403ret6-etched.step/gd32f403ret6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gd32f403ret6.step/gd32f403ret6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GigaDevice Semicon Beijing datasheet (94 pp, sha256
f6702479232b3155, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).