main
Ray
Publish 0.1.0
f2b2046
GD32C113CBT6
GigaDevice Semicon Beijing · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)
GD32C113CBT6 from GigaDevice Semicon Beijing, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Default function VBAT (backup-domain supply); the pin definition table gives no voltage limits for this pin. |
| 2 | PC13-TAMPER-RTC | bidirectional | Default GPIO PC13, alternate function RTC_TAMPER; the I/O level is not marked 5VT in the table. |
| 3 | PC14-OSC32IN | bidirectional | Default GPIO PC14, alternate function OSC32IN; the I/O level is not marked 5VT in the table. |
| 4 | PC15-OSC32OUT | bidirectional | Default GPIO PC15, alternate function OSC32OUT; the I/O level is not marked 5VT in the table. |
| 5 | PD0-OSCIN | input | Default function OSCIN (high-speed oscillator input); can be remapped to PD0, and PD0/PD1 cannot be used for EXTI in this package. |
| 6 | PD1-OSCOUT | output | Default function OSCOUT (high-speed oscillator output); can be remapped to PD1, and PD0/PD1 cannot be used for EXTI in this package. |
| 7 | NRST | bidirectional | Reset pin, default function NRST. |
| 8 | VSSA | power_in | Analog ground pin (default VSSA); in this package VREFN is internally connected to VSSA. |
| 9 | VDDA | power_in | Analog supply pin (default VDDA); in this package VREFP is internally connected to VDDA. |
| 10 | PA0-WKUP | bidirectional | Default GPIO PA0; alternate functions WKUP, USART1_CTS, ADC01_IN0, TIMER1_CH0, TIMER1_ETI and TIMER4_CH0. |
| 11 | PA1 | bidirectional | Default GPIO PA1; alternate functions USART1_RTS/USART1_DE, ADC01_IN1, TIMER4_CH1 and TIMER1_CH1. |
| 12 | PA2 | bidirectional | Default GPIO PA2; alternate functions USART1_TX, TIMER4_CH2, ADC01_IN2, TIMER8_CH0, TIMER1_CH2 and SPI0_IO2. |
| 13 | PA3 | bidirectional | Default GPIO PA3; alternate functions USART1_RX, TIMER4_CH3, ADC01_IN3, TIMER1_CH3, TIMER8_CH1 and SPI0_IO3. |
| 14 | PA4 | bidirectional | Default GPIO PA4; alternate functions SPI0_NSS, USART1_CK, DAC_OUT0 and ADC01_IN4; remap to SPI2_NSS and I2S2_WS. |
| 15 | PA5 | bidirectional | Default GPIO PA5; alternate functions SPI0_SCK, ADC01_IN5 and DAC_OUT1. |
| 16 | PA6 | bidirectional | Default GPIO PA6; alternate functions SPI0_MISO, ADC01_IN6, TIMER2_CH0 and TIMER12_CH0; remap to TIMER0_BRKIN. |
| 17 | PA7 | bidirectional | Default GPIO PA7; alternate functions SPI0_MOSI, ADC01_IN7, TIMER2_CH1 and TIMER13_CH0; remap to TIMER0_CH0_ON. |
| 18 | PB0 | bidirectional | Default GPIO PB0; alternate functions ADC01_IN8 and TIMER2_CH2; remap to TIMER0_CH1_ON. |
| 19 | PB1 | bidirectional | Default GPIO PB1; alternate functions ADC01_IN9 and TIMER2_CH3; remap to TIMER0_CH2_ON. |
| 20 | PB2 | bidirectional | Default GPIO PB2 (also BOOT1); this pin is 5V tolerant (5VT). |
| 21 | PB10 | bidirectional | Default GPIO PB10; alternate functions I2C1_SCL and USART2_TX; remap to TIMER1_CH2; 5V tolerant (5VT). |
| 22 | PB11 | bidirectional | Default GPIO PB11; alternate functions I2C1_SDA and USART2_RX; remap to TIMER1_CH3; 5V tolerant (5VT). |
| 23 | VSS_1 | power_in | Ground pin (default VSS_1). |
| 24 | VDD_1 | power_in | Power supply pin (default VDD_1). |
| 25 | PB12 | bidirectional | Default GPIO PB12; alternate functions SPI1_NSS, I2S1_WS, I2C1_SMBA, USART2_CK, TIMER0_BRKIN and CAN1_RX; 5V tolerant (5VT). |
| 26 | PB13 | bidirectional | Default GPIO PB13; alternate functions SPI1_SCK, I2S1_CK, USART2_CTS, TIMER0_CH0_ON, CAN1_TX and I2C1_TXFRAME; 5V tolerant (5VT). |
| 27 | PB14 | bidirectional | Default GPIO PB14; alternate functions SPI1_MISO, USART2_RTS/USART2_DE, TIMER0_CH1_ON and TIMER11_CH0; 5V tolerant (5VT). |
| 28 | PB15 | bidirectional | Default GPIO PB15; alternate functions SPI1_MOSI, I2S1_SD, TIMER0_CH2_ON and TIMER11_CH1; 5V tolerant (5VT). |
| 29 | PA8 | bidirectional | Default GPIO PA8; alternate functions USART0_CK, TIMER0_CH0, CK_OUT0, VCORE, USBFS_SOF and CTC_SYNC; 5V tolerant (5VT). |
| 30 | PA9 | bidirectional | Default GPIO PA9; alternate functions USART0_TX, TIMER0_CH1 and USBFS_VBUS; 5V tolerant (5VT). |
| 31 | PA10 | bidirectional | Default GPIO PA10; alternate functions USART0_RX, TIMER0_CH2, USBFS_ID and V1REF; 5V tolerant (5VT). |
| 32 | PA11 | bidirectional | Default GPIO PA11; alternate functions USART0_CTS, CAN0_RX, USBFS_DM and TIMER0_CH3; 5V tolerant (5VT). |
| 33 | PA12 | bidirectional | Default GPIO PA12; alternate functions USART0_RTS/USART0_DE, CAN0_TX, USBFS_DP and TIMER0_ETI; 5V tolerant (5VT). |
| 34 | PA13 | bidirectional | Default function JTMS/SWDIO (debug); can be remapped to PA13; 5V tolerant (5VT). |
| 35 | VSS_2 | power_in | Ground pin (default VSS_2). |
| 36 | VDD_2 | power_in | Power supply pin (default VDD_2). |
| 37 | PA14 | bidirectional | Default function JTCK/SWCLK (debug); can be remapped to PA14; 5V tolerant (5VT). |
| 38 | PA15 | bidirectional | Default function JTDI; alternate functions SPI2_NSS and I2S2_WS; remap to TIMER1_CH0, TIMER1_ETI, PA15 and SPI0_NSS; 5V tolerant (5VT). |
| 39 | PB3 | bidirectional | Default function JTDO; alternate functions SPI2_SCK and I2S2_CK; remap to TIMER1_CH1, PB3 and SPI0_SCK; 5V tolerant (5VT). |
| 40 | PB4 | bidirectional | Default function NJTRST; alternate functions SPI2_MISO and I2C0_TXFRAME; remap to TIMER2_CH0, PB4 and SPI0_MISO; 5V tolerant (5VT). |
| 41 | PB5 | bidirectional | Default GPIO PB5; alternate functions I2C0_SMBA, SPI2_MOSI and I2S2_SD; remap to TIMER2_CH1, SPI0_MOSI and CAN1_RX; the I/O level is not marked 5VT in the table. |
| 42 | PB6 | bidirectional | Default GPIO PB6; alternate functions I2C0_SCL and TIMER3_CH0; remap to USART0_TX, CAN1_TX and SPI0_IO2; 5V tolerant (5VT). |
| 43 | PB7 | bidirectional | Default GPIO PB7; alternate functions I2C0_SDA and TIMER3_CH1; remap to USART0_RX and SPI0_IO3; 5V tolerant (5VT). |
| 44 | BOOT0 | input | Boot mode select input, default function BOOT0. |
| 45 | PB8 | bidirectional | Default GPIO PB8; alternate functions TIMER3_CH2 and TIMER9_CH0; remap to I2C0_SCL and CAN0_RX; 5V tolerant (5VT). |
| 46 | PB9 | bidirectional | Default GPIO PB9; alternate functions TIMER3_CH3 and TIMER10_CH0; remap to I2C0_SDA and CAN0_TX; 5V tolerant (5VT). |
| 47 | VSS_3 | power_in | Ground pin (default VSS_3). |
| 48 | VDD_3 | power_in | Power supply pin (default VDD_3). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GigaDevice Semicon Beijing |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External voltage range (VDD) | VDD | -0.3 | 3.6 | V | min/max printed as VSS - 0.3 / VSS + 3.6 V | 44 | |
| External analog supply voltage (VDDA) | VDDA | -0.3 | 3.6 | V | min/max printed as VSSA - 0.3 / VSSA + 3.6 V | 44 | |
| External battery supply voltage (VBAT) | VBAT | -0.3 | 3.6 | V | min/max printed as VSS - 0.3 / VSS + 3.6 V | 44 | |
| Input voltage on 5V tolerant pin | VIN | -0.3 | V | 5V tolerant pin; max printed as VDD + 3.6 V (note 3: not above 5.5 V) | 44 | ||
| Input voltage on other I/O | VIN | -0.3 | 3.6 | V | Other I/O pins | 44 | |
| Maximum current for GPIO pins | IIO | -25 | 25 | mA | Printed as ±25 mA | 44 | |
| Operating temperature range | TA | -40 | 85 | °C | 44 | ||
| Power dissipation at TA = 85°C of LQFP48 | PD | 574 | mW | TA = 85°C, LQFP48 | 44 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 44 | ||
| Maximum junction temperature | TJ | 125 | °C | 44 | |||
| Supply voltage | VDD | 1.71 | 3.3 | 3.6 | V | 44 | |
| Analog supply voltage, ADC not used | VDDA | 1.71 | 3.3 | 3.6 | V | ADC not used | 44 |
| Analog supply voltage, ADC used | VDDA | 2.4 | 3.3 | 3.6 | V | ADC used | 44 |
| Battery supply voltage | VBAT | 1.71 | 3.6 | V | 44 | ||
| AHB clock frequency | fHCLK | 120 | MHz | 45 | |||
| APB1 clock frequency | fAPB1 | 60 | MHz | 45 | |||
| APB2 clock frequency | fAPB2 | 120 | MHz | 45 | |||
| Crystal or ceramic frequency (HXTAL) | fHXTAL | 4 | 8 | 32 | MHz | 1.71 ≤ VDD ≤ 3.6 V | 54 |
| Crystal or ceramic duty cycle (HXTAL) | Ducy(HXTAL) | 30 | 50 | 70 | % | 54 | |
| Recommended matching capacitance on OSCIN and OSCOUT | CHXTAL | 20 | 30 | pF | 54 | ||
| External clock source or oscillator frequency (HXTAL bypass) | fHXTAL_ext | 1 | 50 | MHz | VDD = 3.3 V | 54 | |
| Duty cycle (HXTAL bypass) | Ducy(HXTAL) | 40 | 60 | % | 54 | ||
| Crystal or ceramic duty cycle (LXTAL) | Ducy(LXTAL) | 30 | 70 | % | 55 | ||
| External clock source or oscillator frequency (LXTAL bypass) | fLXTAL_ext | 32.768 | 1000 | kHz | VDD = 3.3 V | 55 | |
| IRC8M oscillator frequency accuracy, factory-trimmed | ACCIRC8M | -1 | 1 | % | VDD = VDDA = 3.3 V, TA = 25 °C | 56 | |
| IRC8M oscillator duty cycle | DucyIRC8M | 45 | 50 | 55 | % | VDD = VDDA = 3.3 V | 56 |
| Low speed internal oscillator (IRC40K) frequency | fIRC40K | 28 | 40 | 60 | kHz | VDD = VDDA = 3.3 V, TA = -40 °C ~ +85 °C | 56 |
| IRC48M oscillator frequency accuracy, factory-trimmed | ACCIRC48M | -2 | 2 | % | VDD = VDDA = 3.3 V, TA = 25 °C | 57 | |
| PLL input clock frequency | fPLLIN | 1 | 8 | 25 | MHz | 57 | |
| PLL output clock frequency | fPLLOUT | 16 | 120 | MHz | 57 | ||
| VCO output frequency | fVCO | 32 | 240 | MHz | 57 | ||
| PLL lock time | tLOCK | 300 | μs | 57 | |||
| Number of guaranteed program/erase cycles before failure (Endurance) | PECYC | 100 | kcycles | TA = -40 °C ~ +85 °C | 58 | ||
| Data retention time | tRET | 10 | years | 10k cycles at TA = 85 °C | 58 | ||
| Word programming time | tPROG | 80 | 90 | μs | TA = -40 °C ~ +85 °C | 58 | |
| Page erase time | tERASE | 1 | 20 | ms | TA = -40 °C ~ +85 °C | 58 | |
| Mass erase time | tMERASE | 8 | 20 | ms | TA = -40 °C ~ +85 °C | 58 | |
| NRST Input low level voltage | VIL(NRST) | -0.3 | V | 1.8 V ≤ VDD = VDDA ≤ 3.6 V; max printed as 0.3 VDD | 58 | ||
| Input voltage at ADC input range | VIN | 0 | V | Max printed as VREFP | 62 | ||
| Positive reference voltage | VREFP | 1.8 | V | Max printed as VDDA | 62 | ||
| ADC clock | fADC | 0.1 | 40 | MHz | 62 | ||
| External input impedance | RAIN | 156.57 | kΩ | See Equation 1 | 62 | ||
| Sampling time | ts | 0.038 | 5.99 | μs | fADC = 40 MHz | 62 | |
| Electrostatic discharge voltage (human body model) | VESD(HBM) | 5000 | V | TA = 25 °C; JS-001-2017 | 53 | ||
| Electrostatic discharge voltage (charge device model) | VESD(CDM) | 800 | V | TA = 25 °C; JS-002-2018 | 53 | ||
| Static latch-up I-test | LU | -200 | 200 | mA | TA = 25 °C; JESD78E-2016; printed as ±200 mA | 54 | |
| Vsupply over voltage (latch-up) | Vsupply | 5.4 | V | 54 | |||
| DAC resistive load with buffer ON | RLOAD | 5 | kΩ | Resistive load with buffer ON | 64 | ||
| DAC impedance output with buffer OFF | Ro | 15 | kΩ | Impedance output with buffer OFF | 64 | ||
| DAC load capacitance | CLOAD | 50 | pF | No pin/pad capacitance included | 64 | ||
| Lower DAC_OUT voltage with buffer ON | DAC_OUT min | 0.2 | V | Lower DAC_OUT voltage with buffer ON | 64 | ||
| Differential non-linearity error | DNL | -2 | 2 | LSB | DAC in 12-bit mode; printed as ±2 LSB | 64 | |
| Integral non-linearity | INL | -4 | 4 | LSB | DAC in 12-bit mode; printed as ±4 LSB | 64 | |
| Offset error | Offset | -12 | 12 | LSB | DAC in 12-bit mode; printed as ±12 LSB | 64 | |
| Gain error | GE | -0.5 | 0.5 | % | DAC in 12-bit mode; printed as ±0.5 % | 64 | |
| Settling time | Tsetting | 0.3 | 1 | μs | CLOAD ≤ 50 pF, RLOAD ≥ 5 kΩ | 64 | |
| Max frequency for a correct DAC_OUT change from code i to i±1 LSBs | Update rate | 4 | MS/s | CLOAD ≤ 50 pF, RLOAD ≥ 5 kΩ | 64 | ||
| Package thermal resistance, junction-to-ambient, LQFP48 | θJA | 69.64 | °C/W | Natural convection, 2S2P PCB | 84 | ||
| Package thermal resistance, junction-to-board, LQFP48 | θJB | 43.16 | °C/W | Cold plate, 2S2P PCB | 84 | ||
| Package thermal resistance, junction-to-case, LQFP48 | θJC | 25.36 | °C/W | Cold plate, 2S2P PCB | 85 |
CAD (KiCad official)
- Symbol:
GD32C113CBT6 - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
gd32c113cbt6-etched.step/gd32c113cbt6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gd32c113cbt6.step/gd32c113cbt6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GigaDevice Semicon Beijing datasheet (88 pp, sha256
2c7121286cf77112, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# GD32C113CBT6
**GigaDevice Semicon Beijing** · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)
GD32C113CBT6 from GigaDevice Semicon Beijing, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Default function VBAT (backup-domain supply); the pin definition table gives no voltage limits for this pin. |
| 2 | PC13-TAMPER-RTC | bidirectional | Default GPIO PC13, alternate function RTC_TAMPER; the I/O level is not marked 5VT in the table. |
| 3 | PC14-OSC32IN | bidirectional | Default GPIO PC14, alternate function OSC32IN; the I/O level is not marked 5VT in the table. |
| 4 | PC15-OSC32OUT | bidirectional | Default GPIO PC15, alternate function OSC32OUT; the I/O level is not marked 5VT in the table. |
| 5 | PD0-OSCIN | input | Default function OSCIN (high-speed oscillator input); can be remapped to PD0, and PD0/PD1 cannot be used for EXTI in this package. |
| 6 | PD1-OSCOUT | output | Default function OSCOUT (high-speed oscillator output); can be remapped to PD1, and PD0/PD1 cannot be used for EXTI in this package. |
| 7 | NRST | bidirectional | Reset pin, default function NRST. |
| 8 | VSSA | power_in | Analog ground pin (default VSSA); in this package VREFN is internally connected to VSSA. |
| 9 | VDDA | power_in | Analog supply pin (default VDDA); in this package VREFP is internally connected to VDDA. |
| 10 | PA0-WKUP | bidirectional | Default GPIO PA0; alternate functions WKUP, USART1_CTS, ADC01_IN0, TIMER1_CH0, TIMER1_ETI and TIMER4_CH0. |
| 11 | PA1 | bidirectional | Default GPIO PA1; alternate functions USART1_RTS/USART1_DE, ADC01_IN1, TIMER4_CH1 and TIMER1_CH1. |
| 12 | PA2 | bidirectional | Default GPIO PA2; alternate functions USART1_TX, TIMER4_CH2, ADC01_IN2, TIMER8_CH0, TIMER1_CH2 and SPI0_IO2. |
| 13 | PA3 | bidirectional | Default GPIO PA3; alternate functions USART1_RX, TIMER4_CH3, ADC01_IN3, TIMER1_CH3, TIMER8_CH1 and SPI0_IO3. |
| 14 | PA4 | bidirectional | Default GPIO PA4; alternate functions SPI0_NSS, USART1_CK, DAC_OUT0 and ADC01_IN4; remap to SPI2_NSS and I2S2_WS. |
| 15 | PA5 | bidirectional | Default GPIO PA5; alternate functions SPI0_SCK, ADC01_IN5 and DAC_OUT1. |
| 16 | PA6 | bidirectional | Default GPIO PA6; alternate functions SPI0_MISO, ADC01_IN6, TIMER2_CH0 and TIMER12_CH0; remap to TIMER0_BRKIN. |
| 17 | PA7 | bidirectional | Default GPIO PA7; alternate functions SPI0_MOSI, ADC01_IN7, TIMER2_CH1 and TIMER13_CH0; remap to TIMER0_CH0_ON. |
| 18 | PB0 | bidirectional | Default GPIO PB0; alternate functions ADC01_IN8 and TIMER2_CH2; remap to TIMER0_CH1_ON. |
| 19 | PB1 | bidirectional | Default GPIO PB1; alternate functions ADC01_IN9 and TIMER2_CH3; remap to TIMER0_CH2_ON. |
| 20 | PB2 | bidirectional | Default GPIO PB2 (also BOOT1); this pin is 5V tolerant (5VT). |
| 21 | PB10 | bidirectional | Default GPIO PB10; alternate functions I2C1_SCL and USART2_TX; remap to TIMER1_CH2; 5V tolerant (5VT). |
| 22 | PB11 | bidirectional | Default GPIO PB11; alternate functions I2C1_SDA and USART2_RX; remap to TIMER1_CH3; 5V tolerant (5VT). |
| 23 | VSS_1 | power_in | Ground pin (default VSS_1). |
| 24 | VDD_1 | power_in | Power supply pin (default VDD_1). |
| 25 | PB12 | bidirectional | Default GPIO PB12; alternate functions SPI1_NSS, I2S1_WS, I2C1_SMBA, USART2_CK, TIMER0_BRKIN and CAN1_RX; 5V tolerant (5VT). |
| 26 | PB13 | bidirectional | Default GPIO PB13; alternate functions SPI1_SCK, I2S1_CK, USART2_CTS, TIMER0_CH0_ON, CAN1_TX and I2C1_TXFRAME; 5V tolerant (5VT). |
| 27 | PB14 | bidirectional | Default GPIO PB14; alternate functions SPI1_MISO, USART2_RTS/USART2_DE, TIMER0_CH1_ON and TIMER11_CH0; 5V tolerant (5VT). |
| 28 | PB15 | bidirectional | Default GPIO PB15; alternate functions SPI1_MOSI, I2S1_SD, TIMER0_CH2_ON and TIMER11_CH1; 5V tolerant (5VT). |
| 29 | PA8 | bidirectional | Default GPIO PA8; alternate functions USART0_CK, TIMER0_CH0, CK_OUT0, VCORE, USBFS_SOF and CTC_SYNC; 5V tolerant (5VT). |
| 30 | PA9 | bidirectional | Default GPIO PA9; alternate functions USART0_TX, TIMER0_CH1 and USBFS_VBUS; 5V tolerant (5VT). |
| 31 | PA10 | bidirectional | Default GPIO PA10; alternate functions USART0_RX, TIMER0_CH2, USBFS_ID and V1REF; 5V tolerant (5VT). |
| 32 | PA11 | bidirectional | Default GPIO PA11; alternate functions USART0_CTS, CAN0_RX, USBFS_DM and TIMER0_CH3; 5V tolerant (5VT). |
| 33 | PA12 | bidirectional | Default GPIO PA12; alternate functions USART0_RTS/USART0_DE, CAN0_TX, USBFS_DP and TIMER0_ETI; 5V tolerant (5VT). |
| 34 | PA13 | bidirectional | Default function JTMS/SWDIO (debug); can be remapped to PA13; 5V tolerant (5VT). |
| 35 | VSS_2 | power_in | Ground pin (default VSS_2). |
| 36 | VDD_2 | power_in | Power supply pin (default VDD_2). |
| 37 | PA14 | bidirectional | Default function JTCK/SWCLK (debug); can be remapped to PA14; 5V tolerant (5VT). |
| 38 | PA15 | bidirectional | Default function JTDI; alternate functions SPI2_NSS and I2S2_WS; remap to TIMER1_CH0, TIMER1_ETI, PA15 and SPI0_NSS; 5V tolerant (5VT). |
| 39 | PB3 | bidirectional | Default function JTDO; alternate functions SPI2_SCK and I2S2_CK; remap to TIMER1_CH1, PB3 and SPI0_SCK; 5V tolerant (5VT). |
| 40 | PB4 | bidirectional | Default function NJTRST; alternate functions SPI2_MISO and I2C0_TXFRAME; remap to TIMER2_CH0, PB4 and SPI0_MISO; 5V tolerant (5VT). |
| 41 | PB5 | bidirectional | Default GPIO PB5; alternate functions I2C0_SMBA, SPI2_MOSI and I2S2_SD; remap to TIMER2_CH1, SPI0_MOSI and CAN1_RX; the I/O level is not marked 5VT in the table. |
| 42 | PB6 | bidirectional | Default GPIO PB6; alternate functions I2C0_SCL and TIMER3_CH0; remap to USART0_TX, CAN1_TX and SPI0_IO2; 5V tolerant (5VT). |
| 43 | PB7 | bidirectional | Default GPIO PB7; alternate functions I2C0_SDA and TIMER3_CH1; remap to USART0_RX and SPI0_IO3; 5V tolerant (5VT). |
| 44 | BOOT0 | input | Boot mode select input, default function BOOT0. |
| 45 | PB8 | bidirectional | Default GPIO PB8; alternate functions TIMER3_CH2 and TIMER9_CH0; remap to I2C0_SCL and CAN0_RX; 5V tolerant (5VT). |
| 46 | PB9 | bidirectional | Default GPIO PB9; alternate functions TIMER3_CH3 and TIMER10_CH0; remap to I2C0_SDA and CAN0_TX; 5V tolerant (5VT). |
| 47 | VSS_3 | power_in | Ground pin (default VSS_3). |
| 48 | VDD_3 | power_in | Power supply pin (default VDD_3). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GigaDevice Semicon Beijing |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External voltage range (VDD) | VDD | -0.3 | | 3.6 | V | min/max printed as VSS - 0.3 / VSS + 3.6 V | 44 |
| External analog supply voltage (VDDA) | VDDA | -0.3 | | 3.6 | V | min/max printed as VSSA - 0.3 / VSSA + 3.6 V | 44 |
| External battery supply voltage (VBAT) | VBAT | -0.3 | | 3.6 | V | min/max printed as VSS - 0.3 / VSS + 3.6 V | 44 |
| Input voltage on 5V tolerant pin | VIN | -0.3 | | | V | 5V tolerant pin; max printed as VDD + 3.6 V (note 3: not above 5.5 V) | 44 |
| Input voltage on other I/O | VIN | -0.3 | | 3.6 | V | Other I/O pins | 44 |
| Maximum current for GPIO pins | IIO | -25 | | 25 | mA | Printed as ±25 mA | 44 |
| Operating temperature range | TA | -40 | | 85 | °C | | 44 |
| Power dissipation at TA = 85°C of LQFP48 | PD | | | 574 | mW | TA = 85°C, LQFP48 | 44 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 44 |
| Maximum junction temperature | TJ | | | 125 | °C | | 44 |
| Supply voltage | VDD | 1.71 | 3.3 | 3.6 | V | | 44 |
| Analog supply voltage, ADC not used | VDDA | 1.71 | 3.3 | 3.6 | V | ADC not used | 44 |
| Analog supply voltage, ADC used | VDDA | 2.4 | 3.3 | 3.6 | V | ADC used | 44 |
| Battery supply voltage | VBAT | 1.71 | | 3.6 | V | | 44 |
| AHB clock frequency | fHCLK | | | 120 | MHz | | 45 |
| APB1 clock frequency | fAPB1 | | | 60 | MHz | | 45 |
| APB2 clock frequency | fAPB2 | | | 120 | MHz | | 45 |
| Crystal or ceramic frequency (HXTAL) | fHXTAL | 4 | 8 | 32 | MHz | 1.71 ≤ VDD ≤ 3.6 V | 54 |
| Crystal or ceramic duty cycle (HXTAL) | Ducy(HXTAL) | 30 | 50 | 70 | % | | 54 |
| Recommended matching capacitance on OSCIN and OSCOUT | CHXTAL | | 20 | 30 | pF | | 54 |
| External clock source or oscillator frequency (HXTAL bypass) | fHXTAL_ext | 1 | | 50 | MHz | VDD = 3.3 V | 54 |
| Duty cycle (HXTAL bypass) | Ducy(HXTAL) | 40 | | 60 | % | | 54 |
| Crystal or ceramic duty cycle (LXTAL) | Ducy(LXTAL) | 30 | | 70 | % | | 55 |
| External clock source or oscillator frequency (LXTAL bypass) | fLXTAL_ext | | 32.768 | 1000 | kHz | VDD = 3.3 V | 55 |
| IRC8M oscillator frequency accuracy, factory-trimmed | ACCIRC8M | -1 | | 1 | % | VDD = VDDA = 3.3 V, TA = 25 °C | 56 |
| IRC8M oscillator duty cycle | DucyIRC8M | 45 | 50 | 55 | % | VDD = VDDA = 3.3 V | 56 |
| Low speed internal oscillator (IRC40K) frequency | fIRC40K | 28 | 40 | 60 | kHz | VDD = VDDA = 3.3 V, TA = -40 °C ~ +85 °C | 56 |
| IRC48M oscillator frequency accuracy, factory-trimmed | ACCIRC48M | -2 | | 2 | % | VDD = VDDA = 3.3 V, TA = 25 °C | 57 |
| PLL input clock frequency | fPLLIN | 1 | 8 | 25 | MHz | | 57 |
| PLL output clock frequency | fPLLOUT | 16 | | 120 | MHz | | 57 |
| VCO output frequency | fVCO | 32 | | 240 | MHz | | 57 |
| PLL lock time | tLOCK | | | 300 | μs | | 57 |
| Number of guaranteed program/erase cycles before failure (Endurance) | PECYC | 100 | | | kcycles | TA = -40 °C ~ +85 °C | 58 |
| Data retention time | tRET | 10 | | | years | 10k cycles at TA = 85 °C | 58 |
| Word programming time | tPROG | 80 | | 90 | μs | TA = -40 °C ~ +85 °C | 58 |
| Page erase time | tERASE | 1 | | 20 | ms | TA = -40 °C ~ +85 °C | 58 |
| Mass erase time | tMERASE | 8 | | 20 | ms | TA = -40 °C ~ +85 °C | 58 |
| NRST Input low level voltage | VIL(NRST) | -0.3 | | | V | 1.8 V ≤ VDD = VDDA ≤ 3.6 V; max printed as 0.3 VDD | 58 |
| Input voltage at ADC input range | VIN | 0 | | | V | Max printed as VREFP | 62 |
| Positive reference voltage | VREFP | 1.8 | | | V | Max printed as VDDA | 62 |
| ADC clock | fADC | 0.1 | | 40 | MHz | | 62 |
| External input impedance | RAIN | | | 156.57 | kΩ | See Equation 1 | 62 |
| Sampling time | ts | 0.038 | | 5.99 | μs | fADC = 40 MHz | 62 |
| Electrostatic discharge voltage (human body model) | VESD(HBM) | | | 5000 | V | TA = 25 °C; JS-001-2017 | 53 |
| Electrostatic discharge voltage (charge device model) | VESD(CDM) | | | 800 | V | TA = 25 °C; JS-002-2018 | 53 |
| Static latch-up I-test | LU | -200 | | 200 | mA | TA = 25 °C; JESD78E-2016; printed as ±200 mA | 54 |
| Vsupply over voltage (latch-up) | Vsupply | | | 5.4 | V | | 54 |
| DAC resistive load with buffer ON | RLOAD | 5 | | | kΩ | Resistive load with buffer ON | 64 |
| DAC impedance output with buffer OFF | Ro | | | 15 | kΩ | Impedance output with buffer OFF | 64 |
| DAC load capacitance | CLOAD | | | 50 | pF | No pin/pad capacitance included | 64 |
| Lower DAC_OUT voltage with buffer ON | DAC_OUT min | 0.2 | | | V | Lower DAC_OUT voltage with buffer ON | 64 |
| Differential non-linearity error | DNL | -2 | | 2 | LSB | DAC in 12-bit mode; printed as ±2 LSB | 64 |
| Integral non-linearity | INL | -4 | | 4 | LSB | DAC in 12-bit mode; printed as ±4 LSB | 64 |
| Offset error | Offset | -12 | | 12 | LSB | DAC in 12-bit mode; printed as ±12 LSB | 64 |
| Gain error | GE | -0.5 | | 0.5 | % | DAC in 12-bit mode; printed as ±0.5 % | 64 |
| Settling time | Tsetting | | 0.3 | 1 | μs | CLOAD ≤ 50 pF, RLOAD ≥ 5 kΩ | 64 |
| Max frequency for a correct DAC_OUT change from code i to i±1 LSBs | Update rate | | | 4 | MS/s | CLOAD ≤ 50 pF, RLOAD ≥ 5 kΩ | 64 |
| Package thermal resistance, junction-to-ambient, LQFP48 | θJA | | 69.64 | | °C/W | Natural convection, 2S2P PCB | 84 |
| Package thermal resistance, junction-to-board, LQFP48 | θJB | | 43.16 | | °C/W | Cold plate, 2S2P PCB | 84 |
| Package thermal resistance, junction-to-case, LQFP48 | θJC | | 25.36 | | °C/W | Cold plate, 2S2P PCB | 85 |
## CAD (KiCad official)
- Symbol: `GD32C113CBT6`
- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`
- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files: `gd32c113cbt6-etched.step` / `gd32c113cbt6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `gd32c113cbt6.step` / `gd32c113cbt6.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [GigaDevice Semicon Beijing datasheet](docs/gd32c113cbt6-datasheet.pdf) (88 pp, sha256 `2c7121286cf77112`, retrieved 2026-11-13, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/gd32c113cbt6-datasheet.pdf)