main
History Download
Ray Publish 0.1.0 c87212c

GD25Q80CTIGR

GigaDevice Semicon Beijing · NOR FLASH · SOP-8

GD25Q80CTIGR from GigaDevice Semicon Beijing, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS# input Chip Select input, which must be driven high when the chip is not selected and must not be left floating after power-on.
2 SO (IO1) bidirectional Data output in standard SPI, and Data Input/Output 1 in Dual and Quad SPI.
3 WP# (IO2) bidirectional Write Protect input in standard SPI, and Data Input/Output 2 in Quad SPI.
4 VSS power_in Ground.
5 SI (IO0) bidirectional Data input in standard SPI, and Data Input/Output 0 in Dual and Quad SPI.
6 SCLK input Serial Clock input.
7 HOLD# (IO3) bidirectional Hold input in standard SPI, and Data Input/Output 3 in Quad SPI.
8 VCC power_in Power supply pin, with a single supply voltage range of 2.7~3.6V.

Key specifications

Parameter Value
Manufacturer GigaDevice Semicon Beijing
Package SOP-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 2.7 3.6 V T=-40℃~85℃ 45
Ambient operating temperature -40 85 ℃ I: Industrial 55
Storage temperature -65 150 ℃ 43
Supply voltage absolute maximum VCC -0.6 4.2 V 43
VCC (min) to CS# low tVSL 1.8 ms 43
Write inhibit voltage VWI 1.5 2.5 V 43
Input capacitance CIN 6 pF VIN=0V 44
Output capacitance COUT 8 pF VOUT=0V 44
Input leakage current ILI -2 2 μA 45
Output leakage current ILO -2 2 μA 45
Standby current ICC1 1 5 μA CS#=VCC, VIN=VCC or VSS 45
Deep power-down current ICC2 1 5 μA CS#=VCC, VIN=VCC or VSS 45
Operating current (Read) ICC3 15 20 mA CLK=0.1VCC / 0.9VCC at 120MHz, Q=Open(*1,*2,*4 I/O) 45
Operating current (Read) ICC3 13 18 mA CLK=0.1VCC / 0.9VCC at 80MHz, Q=Open(*1,*2,*4 I/O) 45
Operating current (PP) ICC4 20 mA CS#=VCC 45
Operating current (WRSR) ICC5 20 mA CS#=VCC 45
Operating current (SE) ICC6 20 mA CS#=VCC 45
Operating current (BE) ICC7 20 mA CS#=VCC 45
Operating current (CE) ICC8 20 mA CS#=VCC 45
High performance current ICC9 0.6 1.2 mA 45
Input low voltage VIL 0.2 VCC printed as 0.2VCC 45
Input high voltage VIH 0.7 VCC printed as 0.7VCC 45
Output low voltage VOL 0.2 V IOL =100μA 45
Serial clock frequency Dual/Quad I/O, Dual/Quad Output without HPM, 3.0V-3.6V FC 104 MHz T=-40℃85℃, VCC=2.73.6V, CL=30pf 48
Serial clock frequency Dual/Quad I/O, Dual/Quad Output without HPM, 2.7V-3.0V fC1 80 MHz T=-40℃85℃, VCC=2.73.6V, CL=30pf 48
Serial clock frequency Dual/Quad I/O, Dual/Quad Output with HPM, 2.7V-3.6V fC2 120 MHz T=-40℃85℃, VCC=2.73.6V, CL=30pf 48
Serial clock frequency Fast Read (0BH), WRSR (01H) fC3 120 MHz T=-40℃85℃, VCC=2.73.6V, CL=30pf 48
Serial clock frequency Read(03H), Read ID, Read Status Register fR 80 MHz T=-40℃85℃, VCC=2.73.6V, CL=30pf 48
Serial clock high time tCLH 4 ns 48
Serial clock low time tCLL 4 ns 48
Serial clock rise time (slew rate) tCLCH 0.1 V/ns 48
Serial clock fall time (slew rate) tCHCL 0.1 V/ns 48
CS# active setup time tSLCH 5 ns 48
CS# active hold time tCHSH 5 ns 48
CS# not active setup time tSHCH 5 ns 48
CS# not active hold time tCHSL 5 ns 48
CS# high time (read/write) tSHSL 20 ns 48
Output disable time tSHQZ 6 ns 48
Output hold time tCLQX 1.2 ns 48
Data in setup time tDVCH 2 ns 48
Data in hold time tCHDX 2 ns 48
HOLD# low setup time (relative to clock) tHLCH 5 ns 48
HOLD# high setup time (relative to clock) tHHCH 5 ns 48
HOLD# high hold time (relative to clock) tCHHL 5 ns 48
HOLD# low hold time (relative to clock) tCHHH 5 ns 48
HOLD# low to High-Z output tHLQZ 6 ns 48
HOLD# high to Low-Z output tHHQX 6 ns 48
Clock low to output valid tCLQV 7 ns 48
Write protect setup time before CS# low tWHSL 20 ns 48
Write protect hold time after CS# high tSHWL 100 ns 48
CS# high to deep power-down mode tDP 20 μs 49
CS# high to standby mode without electronic signature read tRES1 20 μs 49
CS# high to standby mode with electronic signature read tRES2 20 μs 49
CS# high to next command after suspend tSUS 20 μs 49
Latency between resume and next suspend tRS 100 μs 49
CS# high to next command after reset (except from erase) tRST 30 μs 49
CS# high to next command after reset (from erase) tRST_E 12 ms 49
Write status register cycle time tW 5 30 ms 49
Page programming time tPP 0.6 2.4 ms 49

CAD (KiCad official)

  • Symbol: GD25Q80CTIGR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: gd25q80ctigr-etched.step / gd25q80ctigr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gd25q80ctigr.step / gd25q80ctigr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: GigaDevice Semicon Beijing datasheet (67 pp, sha256 554c565bd192f98c, retrieved 2026-10-22, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF