GD25Q80CSIG

{
  "slug": "gd25q80csig",
  "version": "0.1.0",
  "type": "component",
  "description": "GigaDevice Semicon Beijing NOR FLASH, SOP-8-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "gd25q80csig",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "gd25q80csig.kicad_sym",
    "gd25q80csig.kicad_mod",
    "gd25q80csig.glb",
    "gd25q80csig.step",
    "gd25q80csig.lbr",
    "docs/hero.png",
    "docs/gd25q80csig-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "gd25q80csig-hero.glb",
    "gd25q80csig-hero.overlay.json",
    "gd25q80csig-etched.glb"
  ],
  "component": {
    "mpn": "GD25Q80CSIG",
    "manufacturer": "GigaDevice Semicon Beijing",
    "package": "SOP-8-208mil",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "NOR FLASH",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588882161177145344",
    "parts": {
      "symbol": "gd25q80csig.kicad_sym",
      "footprint": "gd25q80csig.kicad_mod",
      "model_3d": "gd25q80csig-hero.glb",
      "model_3d_plain": "gd25q80csig-etched.glb",
      "model_3d_step": "gd25q80csig-etched.step",
      "model_3d_step_plain": "gd25q80csig.step",
      "lbr": "gd25q80csig.lbr"
    },
    "distributor_links": {
      "lcsc": "C79073",
      "digikey": "GD25Q80CSIG-ND",
      "mouser": "363-GD25Q80CSIG"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T02:53:45Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "GD25Q80CSIG-ND",
        "status": "found",
        "lifecycle": "Not For New Designs"
      },
      "mouser": {
        "pn": "363-GD25Q80CSIG",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CS#",
        "type": "input",
        "description": "Chip Select Input; CS# must be driven high when the chip is not selected and must not be left floating at any time after power is on."
      },
      {
        "number": "2",
        "name": "SO (IO1)",
        "type": "bidirectional",
        "description": "Data Output (Data Input Output 1) that serves as the serial data output in standard SPI and as IO1 in Dual/Quad SPI modes."
      },
      {
        "number": "3",
        "name": "WP# (IO2)",
        "type": "bidirectional",
        "description": "Write Protect Input (Data Input Output 2) that serves as the write-protect control input and as IO2 in Quad SPI mode."
      },
      {
        "number": "4",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground reference pin for the device."
      },
      {
        "number": "5",
        "name": "SI (IO0)",
        "type": "bidirectional",
        "description": "Data Input (Data Input Output 0) that serves as the serial data input in standard SPI and as IO0 in Dual/Quad SPI modes."
      },
      {
        "number": "6",
        "name": "SCLK",
        "type": "input",
        "description": "Serial Clock Input that times all data transfers on the serial interface."
      },
      {
        "number": "7",
        "name": "HOLD# (IO3)",
        "type": "bidirectional",
        "description": "Hold Input (Data Input Output 3) that pauses serial communication and as IO3 in Quad SPI mode."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Power Supply pin; single supply range stated as 2.7 to 3.6 V in the features section."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The 8-lead SOP/VSOP/DIP connection diagram text on page 5 is garbled; pin numbers were assigned from; Package variant was confirmed from the ordering code: 'S' denotes SOP8 208mil in the page 47 orderin; Pin descriptions are taken only from the page 5 pin description table and general description; the d"
        ],
        "pages_sent": 12,
        "cost_usd": 0.0398,
        "at": "2026-10-18T02:52:01"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588882161177145344",
        "pages": 54,
        "sha256": "01de0142afede4c8",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "gd25q80csig.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "gd25q80csig-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "247605e91c2d7ff1380a1739f765f2b605e6589c8a4328a1e8e75302596fec58",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}