main
Ray
gd25q64etigr: laser-etched CAD + chip hero (factory 2.0.0 backfill)
f7580fc
GD25Q64ETIGR
GigaDevice Semicon Beijing · NOR FLASH · SOIC-8
GD25Q64ETIGR from GigaDevice Semicon Beijing, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select input, active low. Must be driven high when the device is not selected; do not leave floating after power-on. Enables/disables the SPI interface and terminates command sequences on rising edge. |
| 2 | SO/IO1 | bidirectional | Serial Data Output in Standard SPI mode (SO). Becomes bidirectional I/O line IO1 in Dual/Quad SPI modes. |
| 3 | WP#/IO2 | bidirectional | Active-low Write Protect input in Standard/Dual SPI: hardware-protects the Status Register BP4-BP0 and SRP bits when low. Becomes bidirectional I/O line IO2 when Quad SPI is enabled (QE=1 in Status Register). |
| 4 | VSS | power_in | Ground reference for the device (0 V). |
| 5 | SI/IO0 | bidirectional | Serial Data Input in Standard SPI mode (SI). Becomes bidirectional I/O line IO0 in Dual/Quad SPI modes. Data on SI is latched on the rising edge of SCLK. |
| 6 | SCLK | input | Serial Clock input. Provides the timing reference for the serial interface; input data is latched on the rising edge and output data shifts on the falling edge. SPI modes 0 and 3 are supported, up to 133 MHz. |
| 7 | HOLD#/IO3 | bidirectional | Active-low Hold input in Standard/Dual SPI: pausing serial communication without deselecting the device (SO goes hi-Z; SI and SCLK are don't-care during hold). Becomes bidirectional I/O line IO3 when Quad SPI is enabled (QE=1). HOLD function is disabled when QE=1. |
| 8 | VCC | power_in | Single power supply input, full voltage range 2.7 V to 3.6 V. Should be bypassed to VSS with a decoupling capacitor close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GigaDevice Semicon Beijing |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
GD25Q64ETIGRGD25Q64ETIGTGD25Q64ETIGYGD25Q64ETIGRETISRGD25Q64ETIGRETISTGD25Q64ETIGRETISYGD25Q64ETIGRETJG*GD25Q64ETIGRETJS*GD25Q64ETIGRETEG*GD25Q64ETIGRETES*GD25Q64ETIGRETFG*GD25Q64ETIGRETFS*GD25Q64ETIGRESIGGD25Q64ETIGRESISGD25Q64ETIGRESJGGD25Q64ETIGRESJSGD25Q64ETIGRESEGGD25Q64ETIGRESESGD25Q64ETIGRESFGGD25Q64ETIGRESFSGD25Q64ETIGREFIGGD25Q64ETIGREFISGD25Q64ETIGREFJGGD25Q64ETIGREFJSGD25Q64ETIGREFEGGD25Q64ETIGREFESGD25Q64ETIGREFFGGD25Q64ETIGREFFSGD25Q64ETIGRENIGGD25Q64ETIGRENISGD25Q64ETIGRENJGGD25Q64ETIGRENJSGD25Q64ETIGRENEGGD25Q64ETIGRENESGD25Q64ETIGRENFGGD25Q64ETIGRENFSGD25Q64ETIGREQIGGD25Q64ETIGREQISGD25Q64ETIGREQJGGD25Q64ETIGREQJSGD25Q64ETIGREQEGGD25Q64ETIGREQESGD25Q64ETIGREQFGGD25Q64ETIGREQFSGD25Q64ETIGREWIGGD25Q64ETIGREWISGD25Q64ETIGREWJGGD25Q64ETIGREWJSGD25Q64ETIGREWEGGD25Q64ETIGREWESGD25Q64ETIGREWFGGD25Q64ETIGREWFSGD25Q64ETIGREYIGGD25Q64ETIGREYISGD25Q64ETIGREYJGGD25Q64ETIGREYJSGD25Q64ETIGREYEGGD25Q64ETIGREYESGD25Q64ETIGREYFGGD25Q64ETIGREYFSGD25Q64ETIGREZIGGD25Q64ETIGREZISGD25Q64ETIGREZJGGD25Q64ETIGREZJSGD25Q64ETIGREZEGGD25Q64ETIGREZESGD25Q64ETIGREZFGGD25Q64ETIGREZFSGD25Q64ETIGREBIGGD25Q64ETIGREBISGD25Q64ETIGREBJGGD25Q64ETIGREBJSGD25Q64ETIGREBEGGD25Q64ETIGREBESGD25Q64ETIGREBFGGD25Q64ETIGREBFS
CAD (KiCad official)
- Symbol:
GD25Q64ETIGR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
gd25q64etigr-etched.step/gd25q64etigr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gd25q64etigr.step/gd25q64etigr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GigaDevice Semicon Beijing datasheet (63 pp, sha256
c858ff8e1991d687, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# GD25Q64ETIGR
**GigaDevice Semicon Beijing** · NOR FLASH · SOIC-8
GD25Q64ETIGR from GigaDevice Semicon Beijing, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select input, active low. Must be driven high when the device is not selected; do not leave floating after power-on. Enables/disables the SPI interface and terminates command sequences on rising edge. |
| 2 | SO/IO1 | bidirectional | Serial Data Output in Standard SPI mode (SO). Becomes bidirectional I/O line IO1 in Dual/Quad SPI modes. |
| 3 | WP#/IO2 | bidirectional | Active-low Write Protect input in Standard/Dual SPI: hardware-protects the Status Register BP4-BP0 and SRP bits when low. Becomes bidirectional I/O line IO2 when Quad SPI is enabled (QE=1 in Status Register). |
| 4 | VSS | power_in | Ground reference for the device (0 V). |
| 5 | SI/IO0 | bidirectional | Serial Data Input in Standard SPI mode (SI). Becomes bidirectional I/O line IO0 in Dual/Quad SPI modes. Data on SI is latched on the rising edge of SCLK. |
| 6 | SCLK | input | Serial Clock input. Provides the timing reference for the serial interface; input data is latched on the rising edge and output data shifts on the falling edge. SPI modes 0 and 3 are supported, up to 133 MHz. |
| 7 | HOLD#/IO3 | bidirectional | Active-low Hold input in Standard/Dual SPI: pausing serial communication without deselecting the device (SO goes hi-Z; SI and SCLK are don't-care during hold). Becomes bidirectional I/O line IO3 when Quad SPI is enabled (QE=1). HOLD function is disabled when QE=1. |
| 8 | VCC | power_in | Single power supply input, full voltage range 2.7 V to 3.6 V. Should be bypassed to VSS with a decoupling capacitor close to the pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GigaDevice Semicon Beijing |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `GD25Q64ETIGR`
- `GD25Q64ETIGT`
- `GD25Q64ETIGY`
- `GD25Q64ETIGRETISR`
- `GD25Q64ETIGRETIST`
- `GD25Q64ETIGRETISY`
- `GD25Q64ETIGRETJG*`
- `GD25Q64ETIGRETJS*`
- `GD25Q64ETIGRETEG*`
- `GD25Q64ETIGRETES*`
- `GD25Q64ETIGRETFG*`
- `GD25Q64ETIGRETFS*`
- `GD25Q64ETIGRESIG`
- `GD25Q64ETIGRESIS`
- `GD25Q64ETIGRESJG`
- `GD25Q64ETIGRESJS`
- `GD25Q64ETIGRESEG`
- `GD25Q64ETIGRESES`
- `GD25Q64ETIGRESFG`
- `GD25Q64ETIGRESFS`
- `GD25Q64ETIGREFIG`
- `GD25Q64ETIGREFIS`
- `GD25Q64ETIGREFJG`
- `GD25Q64ETIGREFJS`
- `GD25Q64ETIGREFEG`
- `GD25Q64ETIGREFES`
- `GD25Q64ETIGREFFG`
- `GD25Q64ETIGREFFS`
- `GD25Q64ETIGRENIG`
- `GD25Q64ETIGRENIS`
- `GD25Q64ETIGRENJG`
- `GD25Q64ETIGRENJS`
- `GD25Q64ETIGRENEG`
- `GD25Q64ETIGRENES`
- `GD25Q64ETIGRENFG`
- `GD25Q64ETIGRENFS`
- `GD25Q64ETIGREQIG`
- `GD25Q64ETIGREQIS`
- `GD25Q64ETIGREQJG`
- `GD25Q64ETIGREQJS`
- `GD25Q64ETIGREQEG`
- `GD25Q64ETIGREQES`
- `GD25Q64ETIGREQFG`
- `GD25Q64ETIGREQFS`
- `GD25Q64ETIGREWIG`
- `GD25Q64ETIGREWIS`
- `GD25Q64ETIGREWJG`
- `GD25Q64ETIGREWJS`
- `GD25Q64ETIGREWEG`
- `GD25Q64ETIGREWES`
- `GD25Q64ETIGREWFG`
- `GD25Q64ETIGREWFS`
- `GD25Q64ETIGREYIG`
- `GD25Q64ETIGREYIS`
- `GD25Q64ETIGREYJG`
- `GD25Q64ETIGREYJS`
- `GD25Q64ETIGREYEG`
- `GD25Q64ETIGREYES`
- `GD25Q64ETIGREYFG`
- `GD25Q64ETIGREYFS`
- `GD25Q64ETIGREZIG`
- `GD25Q64ETIGREZIS`
- `GD25Q64ETIGREZJG`
- `GD25Q64ETIGREZJS`
- `GD25Q64ETIGREZEG`
- `GD25Q64ETIGREZES`
- `GD25Q64ETIGREZFG`
- `GD25Q64ETIGREZFS`
- `GD25Q64ETIGREBIG`
- `GD25Q64ETIGREBIS`
- `GD25Q64ETIGREBJG`
- `GD25Q64ETIGREBJS`
- `GD25Q64ETIGREBEG`
- `GD25Q64ETIGREBES`
- `GD25Q64ETIGREBFG`
- `GD25Q64ETIGREBFS`
## CAD (KiCad official)
- Symbol: `GD25Q64ETIGR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `gd25q64etigr-etched.step` / `gd25q64etigr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `gd25q64etigr.step` / `gd25q64etigr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [GigaDevice Semicon Beijing datasheet](docs/gd25q64etigr-datasheet.pdf) (63 pp, sha256 `c858ff8e1991d687`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/gd25q64etigr-datasheet.pdf)