component

GD25Q16ETIGR

Public Made by Adom

by adom

GigaDevice Semicon Beijing NOR FLASH, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentmemorygd25q16etigr
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs gd25q16etigr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
gd25q16etigr-etched.fit.json gd25q16etigr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
gd25q16etigr-etched.glb gd25q16etigr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
gd25q16etigr-etched.step gd25q16etigr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
gd25q16etigr.glb Publish 0.1.0 · Ray
gd25q16etigr.kicad_mod Publish 0.1.0 · Ray
gd25q16etigr.kicad_sym Publish 0.1.0 · Ray
gd25q16etigr.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
gd25q16etigr.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json gd25q16etigr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
README.md gd25q16etigr: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

GD25Q16ETIGR

GigaDevice Semicon Beijing · NOR FLASH · SOP-8

GD25Q16ETIGR from GigaDevice Semicon Beijing, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS# input Chip Select Input, active low. Must be driven high when the device is not selected; do not leave floating after power-on.
2 SO/IO1 bidirectional Serial Data Output in standard SPI mode; bidirectional Data I/O 1 in Dual/Quad SPI modes. Data shifts out on the falling edge of SCLK in standard SPI.
3 WP#/IO2 bidirectional Write Protect input (active low) in standard/dual SPI, protecting the Block Protect bits (BP4-BP0) and SRP bits when low. Becomes bidirectional Quad I/O 2 when the non-volatile Quad Enable (QE) bit is set.
4 VSS power_in Ground reference (0V) for the device power supply and I/O.
5 SI/IO0 bidirectional Serial Data Input in standard SPI mode; bidirectional Data I/O 0 in Dual/Quad SPI modes. Data is latched on the rising edge of SCLK in standard SPI.
6 SCLK input Serial Clock Input. Provides the timing reference for all serial input and output; supports SPI modes 0 and 3 at up to 133MHz with 30pF load.
7 HOLD#/IO3 bidirectional Hold input (active low) pauses serial communication without deselecting the device when QE=0. Becomes bidirectional Quad I/O 3 when the non-volatile Quad Enable (QE) bit is set.
8 VCC power_in Power supply input. Full operating range 2.7-3.6V; typical standby current 11uA, deep power-down current 1uA.

Key specifications

Parameter Value
Manufacturer GigaDevice Semicon Beijing
Package SOP-8
Category Memory
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • GD25Q16ETIGR
  • GD25Q16ETIGRSIGR
  • GD25Q16ETIGRSIG

CAD (KiCad official)

  • Symbol: GD25Q16ETIGR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: gd25q16etigr-etched.step / gd25q16etigr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gd25q16etigr.step / gd25q16etigr.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
gd25q16etigr.step 122 KB You want the bare part, or you mark your own boards.
gd25q16etigr-etched.step 2.4 MB You want the part with GD25Q16ETIGR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 597 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: GigaDevice Semicon Beijing datasheet (58 pp, sha256 e664882f90d940a2, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF