GD25Q16ETIGR

@@ -0,0 +1,50 @@+# GD25Q16ETIGR++**GigaDevice Semicon Beijing** · NOR FLASH · SOP-8++GD25Q16ETIGR from GigaDevice Semicon Beijing, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CS# | input | Chip Select Input, active low. Must be driven high when the device is not selected; do not leave floating after power-on. |+| 2 | SO/IO1 | bidirectional | Serial Data Output in standard SPI mode; bidirectional Data I/O 1 in Dual/Quad SPI modes. Data shifts out on the falling edge of SCLK in standard SPI. |+| 3 | WP#/IO2 | bidirectional | Write Protect input (active low) in standard/dual SPI, protecting the Block Protect bits (BP4-BP0) and SRP bits when low. Becomes bidirectional Quad I/O 2 when the non-volatile Quad Enable (QE) bit is set. |+| 4 | VSS | power_in | Ground reference (0V) for the device power supply and I/O. |+| 5 | SI/IO0 | bidirectional | Serial Data Input in standard SPI mode; bidirectional Data I/O 0 in Dual/Quad SPI modes. Data is latched on the rising edge of SCLK in standard SPI. |+| 6 | SCLK | input | Serial Clock Input. Provides the timing reference for all serial input and output; supports SPI modes 0 and 3 at up to 133MHz with 30pF load. |+| 7 | HOLD#/IO3 | bidirectional | Hold input (active low) pauses serial communication without deselecting the device when QE=0. Becomes bidirectional Quad I/O 3 when the non-volatile Quad Enable (QE) bit is set. |+| 8 | VCC | power_in | Power supply input. Full operating range 2.7-3.6V; typical standby current 11uA, deep power-down current 1uA. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | GigaDevice Semicon Beijing |+| Package | SOP-8 |+| Category | Memory |+| Pins | 8 |++## Ordering variants++- `GD25Q16ETIGRTIGR`+- `GD25Q16ETIGRTIG`+- `GD25Q16ETIGRSIGR`+- `GD25Q16ETIGRSIG`++## CAD (KiCad official)++- Symbol: `GD25Q16ETIGR`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [GigaDevice Semicon Beijing datasheet](docs/gd25q16etigr-datasheet.pdf) (58 pp, sha256 `e664882f90d940a2`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/gd25q16etigr-datasheet.pdf)

@@ -0,0 +1,34 @@+{+  "slug": "gd25q16etigr",+  "version": "0.1.0",+  "type": "component",+  "description": "GigaDevice Semicon Beijing NOR FLASH, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "memory",+    "gd25q16etigr"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "gd25q16etigr.kicad_sym",+    "gd25q16etigr.kicad_mod",+    "gd25q16etigr.glb",+    "gd25q16etigr.step",+    "gd25q16etigr.lbr",+    "docs/hero.png",+    "docs/gd25q16etigr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file