component
GD25LQ40CTIGR
Public Made by Adomby adom
GigaDevice Semicon Beijing NOR FLASH, SOP-8-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownGD25LQ40CTIGR
GigaDevice Semicon Beijing · NOR FLASH · SOP-8-150mil
GD25LQ40CTIGR from GigaDevice Semicon Beijing, in a SOP-8-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select input; must be driven high when the chip is not selected and must not be left floating at any time after power is on. |
| 2 | SO (IO1) | bidirectional | Serial data output in standard SPI, and Data Input Output 1 (IO1) in Dual/Quad SPI. |
| 3 | WP# (IO2) | bidirectional | Write Protect input in standard SPI, and Data Input Output 2 (IO2) in Quad SPI. |
| 4 | VSS | power_in | Ground. |
| 5 | SI (IO0) | bidirectional | Serial data input in standard SPI, and Data Input Output 0 (IO0) in Dual/Quad SPI. |
| 6 | SCLK | input | Serial Clock input. |
| 7 | HOLD# (IO3) | bidirectional | Hold input in standard SPI, and Data Input Output 3 (IO3) in Quad SPI. |
| 8 | VCC | power_in | Power supply; full voltage range 1.65 to 2.1V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GigaDevice Semicon Beijing |
| Package | SOP-8-150mil |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | 1.65 | 2.1 | V | T=-40℃~85℃ | 51 | |
| VCC absolute maximum | VCC | -0.6 | 2.5 | V | 49 | ||
| Storage temperature | -65 | 150 | ℃ | 49 | |||
| Ambient operating temperature | -40 | 85 | ℃ | I grade range | 49 | ||
| Transient Input/Output Voltage (overshoot) | -2 | V | max is VCC+2.0 | 49 | |||
| Applied Input/Output Voltage | -0.6 | V | max is VCC+0.5 | 49 | |||
| Input Leakage Current | ILI | -2 | 2 | μA | 51 | ||
| Output Leakage Current | ILO | -2 | 2 | μA | 51 | ||
| Standby Current | ICC1 | 9 | 28 | μA | CS#=VCC, VIN=VCC or VSS | 51 | |
| Deep Power-Down Current | ICC2 | 1 | 8 | μA | CS#=VCC, VIN=VCC or VSS | 51 | |
| Operating Current (Read) 104MHz | ICC3 | 10 | 13 | mA | CLK=0.1VCC/0.9VCC at 104MHz, Q=Open(*1,*2,*4 I/O) | 51 | |
| Operating Current (Read) 80MHz | ICC3 | 8 | 10 | mA | CLK=0.1VCC/0.9VCC at 80MHz, Q=Open(*1,*2,*4 I/O) | 51 | |
| Operating Current (PP) | ICC4 | 15 | 20 | mA | CS#=VCC | 51 | |
| Operating Current (WRSR) | ICC5 | 15 | 20 | mA | CS#=VCC | 51 | |
| Operating Current (SE) | ICC6 | 15 | 20 | mA | CS#=VCC | 51 | |
| Operating Current (BE) | ICC7 | 15 | 20 | mA | CS#=VCC | 51 | |
| Operating Current (CE) | ICC8 | 15 | 20 | mA | CS#=VCC | 51 | |
| Output Low Voltage | VOL | 0.2 | V | IOL =100μA | 51 | ||
| VCC (min) to CS# Low | tVSL | 1.8 | ms | 49 | |||
| Write Inhibit Voltage | VWI | 1 | 1.4 | V | 49 | ||
| Input Capacitance | CIN | 6 | pF | VIN=0V | 50 | ||
| Output Capacitance | COUT | 8 | pF | VOUT=0V | 50 | ||
| Serial Clock Frequency (0BH,3BH,BBH,6BH,EBH) | fC | 104 | MHz | VCC=1.65~2.1V, CL=30pf | 54 | ||
| Serial Clock Frequency (Read 03H) | fR | 80 | MHz | VCC=1.65~2.1V, CL=30pf | 54 | ||
| Serial Clock High Time | tCLH | 4 | ns | 54 | |||
| Serial Clock Low Time | tCLL | 4 | ns | 54 | |||
| CS# Active Setup Time | tSLCH | 5 | ns | 54 | |||
| CS# Active Hold Time | tCHSH | 5 | ns | 54 | |||
| CS# High Time (Read/Write) | tSHSL | 20 | ns | 54 | |||
| Output Disable Time | tSHQZ | 6 | ns | 54 | |||
| Output Hold Time | tCLQX | 1.2 | ns | 54 | |||
| Data In Setup Time | tDVCH | 2 | ns | 54 | |||
| Data In Hold Time | tCHDX | 2 | ns | 54 | |||
| Clock Low To Output Valid | tCLQV | 7 | ns | 54 | |||
| CS# High To Deep Power-Down Mode | tDP | 3 | μs | 54 | |||
| CS# High To Standby Mode Without Electronic Signature Read | tRES1 | 20 | μs | 54 | |||
| CS# High To Standby Mode With Electronic Signature Read | tRES2 | 20 | μs | 54 | |||
| CS# High To Next Command After Suspend | tSUS | 20 | μs | 54 | |||
| Latency Between Resume And Next Suspend | tRS | 100 | μs | 54 | |||
| Write Status Register Cycle Time | tW | 1 | 20 | ms | 54 | ||
| Byte Program Time (First Byte) | tBP1 | 25 | 50 | μs | 54 | ||
| Additional Byte Program Time | tBP2 | 2.5 | 5 | μs | After first byte | 54 | |
| Page Programming Time | tPP | 0.7 | 2.4 | ms | 55 | ||
| Sector Erase Time | tSE | 40 | 300 | ms | 55 | ||
| Block Erase Time (32K Bytes) | tBE1 | 0.15 | 0.8 | s | 55 | ||
| Block Erase Time (64K Bytes) | tBE2 | 0.18 | 1 | s | 55 | ||
| Chip Erase Time (GD25LQ40C) | tCE | 1.25 | 3 | s | 55 |
CAD (KiCad official)
- Symbol:
GD25LQ40CTIGR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8-150mil (KiCad packages3D, STEP)
- 3D model files:
gd25lq40ctigr-etched.step/gd25lq40ctigr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gd25lq40ctigr.step/gd25lq40ctigr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GigaDevice Semicon Beijing datasheet (78 pp, sha256
56a0190be81b183c, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).