main
History Download
Ray Publish 0.1.0 f8b2878

GD25LQ05CEIGR

GigaDevice Semicon Beijing · NOR FLASH · USON-8-EP(2x3)

GD25LQ05CEIGR from GigaDevice Semicon Beijing, in a USON-8-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS# input Chip Select Input; it must be driven high when the chip is not selected and must not be left floating at any time after power is on.
2 SO (IO1) bidirectional Data Output (Data Input Output 1) used as the IO1 data line in Dual/Quad SPI operation.
3 WP# (IO2) bidirectional Write Protect Input (Data Input Output 2) that serves as the IO2 data line in Quad SPI operation.
4 VSS power_in Ground reference for the device.
5 SI (IO0) bidirectional Data Input (Data Input Output 0) that serves as the IO0 data line in Dual/Quad SPI operation.
6 SCLK input Serial Clock Input for the SPI interface.
7 HOLD# (IO3) bidirectional Hold Input (Data Input Output 3) that serves as the IO3 data line in Quad SPI operation.
8 VCC power_in Power Supply pin for the device.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer GigaDevice Semicon Beijing
Package USON-8-EP(2x3)
Category Memory
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Leakage Current ILI -2 2 μA 51
Output Leakage Current ILO -2 2 μA 51
Standby Current ICC1 9 28 μA CS#=VCC, VIN=VCC or VSS 51
Deep Power-Down Current ICC2 1 8 μA CS#=VCC, VIN=VCC or VSS 51
Operating Current (Read) at 104MHz ICC3 10 13 mA CLK=0.1VCC/ 0.9VCC at 104MHz, Q=Open(*1,*2,*4 I/O) 51
Operating Current (Read) at 80MHz ICC3 8 10 mA CLK=0.1VCC/0.9VCC at 80MHz, Q=Open(*1,*2,*4 I/O) 51
Operating Current (PP) ICC4 15 20 mA CS#=VCC 51
Operating Current (WRSR) ICC5 15 20 mA CS#=VCC 51
Operating Current (SE) ICC6 15 20 mA CS#=VCC 51
Operating Current (BE) ICC7 15 20 mA CS#=VCC 51
Operating Current (CE) ICC8 15 20 mA CS#=VCC 51
Output Low Voltage VOL 0.2 V IOL =100μA 51
Serial Clock Frequency For: 0BH, 3BH, BBH, 6BH, EBH fC 104 MHz For: 0BH, 3BH, BBH, 6BH, EBH 54
Serial Clock Frequency For: Read (03H) fR 80 MHz For: Read (03H) 54
Serial Clock High Time tCLH 4 ns 54
Serial Clock Low Time tCLL 4 ns 54
Serial Clock Rise Time (Slew Rate) tCLCH 0.1 V/ns 54
Serial Clock Fall Time (Slew Rate) tCHCL 0.1 V/ns 54
CS# Active Setup Time tSLCH 5 ns 54
CS# Active Hold Time tCHSH 5 ns 54
CS# Not Active Setup Time tSHCH 5 ns 54
CS# Not Active Hold Time tCHSL 5 ns 54
CS# High Time (Read/Write) tSHSL 20 ns 54
Output Disable Time tSHQZ 6 ns 54
Output Hold Time tCLQX 1.2 ns 54
Data In Setup Time tDVCH 2 ns 54
Data In Hold Time tCHDX 2 ns 54
Hold# Low Setup Time (Relative to Clock) tHLCH 5 ns 54
Hold# High Setup Time (Relative to Clock) tHHCH 5 ns 54
Hold# High Hold Time (Relative to Clock) tCHHL 5 ns 54
Hold# Low Hold Time (Relative to Clock) tCHHH 5 ns 54
Hold# Low To High-Z Output tHLQZ 6 ns 54
Hold# Low To Low-Z Output tHHQX 6 ns 54
Clock Low To Output Valid tCLQV 7 ns 54
Write Protect Setup Time Before CS# Low tWHSL 20 ns 54
Write Protect Hold Time After CS# High tSHWL 100 ns 54
CS# High To Deep Power-Down Mode tDP 3 μs 54
CS# High To Standby Mode Without Electronic Signature Read tRES1 20 μs 54
CS# High To Standby Mode With Electronic Signature Read tRES2 20 μs 54
CS# High To Next Command After Suspend tSUS 20 μs 54
Latency Between Resume And Next Suspend tRS 100 μs 54
CS# High To Next Command After Reset (Except from Erase) tRST 30 μs 54
CS# High To Next Command After Reset (From Erase) tRST_E 12 ms 54
Write Status Register Cycle Time tW 20 ms 54
Byte Program Time (First Byte) tBP1 25 50 μs 54
Addition Byte Program Time (After First Byte) tBP2 2.5 5 μs 54
Page Programming Time tPP 0.7 2.4 ms 55
Sector Erase Time tSE 40 300 ms 55
Block Erase Time (32K Bytes) tBE1 0.15 0.8 s 55
Block Erase Time (64K Bytes) tBE2 0.18 1 s 55
Chip Erase Time (GD25LQ05C) tCE 0.2 1 s 55
VCC (min) To CS# Low tVSL 1.8 ms 49
Write Inhibit Voltage VWI 1.4 V VCC (min) 1 49
Ambient Operating Temperature -40 85 ℃ 49
Storage Temperature -65 150 ℃ 49
Transient Input/Output Voltage -2 V note: overshoot 49
Applied Input/Output Voltage -0.6 V 49
VCC Supply Voltage VCC -0.6 2.5 V 49

CAD (KiCad official)

  • Symbol: GD25LQ05CEIGR
  • Footprint: Package_SON:SON-8-1EP_3x2mm_P0.5mm_EP1.4x1.6mm
  • 3D model: USON-8-EP(2x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: gd25lq05ceigr-etched.step / gd25lq05ceigr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gd25lq05ceigr.step / gd25lq05ceigr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: GigaDevice Semicon Beijing datasheet (78 pp, sha256 fbfe511481576490, retrieved 2026-10-29, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF