component
GCM1555C1H201FA16D
Public Made by Adomby adom
MURATA ELECTRONICS Global Sourcing Parts, 0402. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownGCM1555C1H201FA16D
MURATA ELECTRONICS · Global Sourcing Parts · 0402
GCM1555C1H201FA16D from MURATA ELECTRONICS, in a 0402. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised capacitor; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised capacitor; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MURATA ELECTRONICS |
| Package | 0402 |
| Category | Global Sourcing Parts |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Capacitance tolerance | C | -1 | 1 | % | Printed +/-1% (tolerance code F), 200pF | 1 | |
| Temperature coefficient (TCR) | -30 | 30 | ppm/℃ | Temp. range 25 to 125℃, reference temp 25℃ (0 +/-30 ppm/℃) | 1 | ||
| Capacitance drift (temperature step) | -0.2 | 0.2 | % | Within +/-0.2% or +/-0.05pF, whichever is larger; measured steps 1,3,5 over step 3 | 5 | ||
| Capacitance drift (temperature step) | -0.05 | 0.05 | pF | Within +/-0.2% or +/-0.05pF, whichever is larger | 5 | ||
| Rated voltage (DC) | 50 | V | DC rated voltage; applied voltage must not exceed rated voltage | 1 | |||
| Operating temperature range | -55 | 125 | ℃ | Operating temp. range, including self-heating | 1 | ||
| Storage temperature (standard condition) | 5 | 40 | ℃ | Standard storage condition; recommendation less than 30℃ | 10 | ||
| Storage relative humidity (standard condition) | 20 | 70 | % | Standard storage condition | 10 | ||
| Capacitance change - moisture resistance | -3 | 3 | % | Moisture resistance, +25 to +65℃, 80 to 98%RH | 2 | ||
| Q - moisture resistance | Q | 350 | - | Moisture resistance test, +25 to +65℃, 80 to 98%RH | 2 | ||
| Insulation resistance - moisture resistance | IR | 10000 | MΩ | Room temp., after moisture resistance test | 2 | ||
| Capacitance change - temperature cycling | -2.5 | 2.5 | % | 1000 cycles temperature cycling | 2 | ||
| Q - temperature cycling | Q | 1000 | - | 1000 cycles temperature cycling | 2 | ||
| Insulation resistance - temperature cycling | IR | 10000 | MΩ | Room temp., after 1000 cycles | 2 | ||
| Capacitance change - high temperature exposure | -2.5 | 2.5 | % | Test temp 150+/-3℃, 1000+/-12h | 2 | ||
| Q - high temperature exposure | Q | 1000 | - | Test temp 150+/-3℃, 1000+/-12h | 2 | ||
| Insulation resistance - high temperature exposure | IR | 10000 | MΩ | Room temp., after 150+/-3℃, 1000+/-12h | 2 | ||
| Insulation resistance - ESD | IR | 10000 | MΩ | Per AEC-Q200-002, total of 36 times; room temp. | 3 | ||
| Insulation resistance - resistance to soldering heat | IR | 10000 | MΩ | Solder bath 260+/-5℃, 10+/-1s, Sn-3.0Ag-0.5Cu | 3 | ||
| Insulation resistance - vibration | IR | 10000 | MΩ | 10 to 2000 to 10Hz, 20 min, total amplitude 1.5mm, 3 directions | 3 | ||
| Insulation resistance - mechanical shock | IR | 10000 | MΩ | Half-sine, peak 1500g, holding 0.5ms, 18 shocks | 3 | ||
| Insulation resistance - resistance to solvents | IR | 10000 | MΩ | Per MIL-STD-202 Method 215 | 3 | ||
| Capacitance change - operational life | -3 | 3 | % | Max operating temp +/-3℃, 1000+/-12h, rated voltage and 1.3 Vdc | 3 | ||
| Q - operational life | Q | 350 | - | Max operating temp, 1000+/-12h | 3 | ||
| Insulation resistance - operational life | IR | 1000 | MΩ | Room temp., after max operating temp, 1000+/-12h | 3 | ||
| Capacitance change - biased humidity | -3 | 3 | % | 85+/-3℃, 80 to 85%RH | 3 | ||
| Q - biased humidity | Q | 200 | - | 85+/-3℃, 80 to 85%RH | 3 | ||
| Insulation resistance - biased humidity | IR | 1000 | MΩ | Room temp., after 85+/-3℃, 80 to 85%RH | 3 | ||
| Beam load destruction strength | 8 | N | Destruction value; stress load speed 0.5mm/s | 4 | |||
| Capacitance change - board flex | -5 | 5 | % | Flexure 3mm, holding 60s, reflow mounted | 4 | ||
| Insulation resistance (high temperature) | IR | 10000 | MΩ | Measurement temp 125℃, rated voltage, charging 2min | 4 | ||
| Insulation resistance (room temperature) | IR | 100000 | MΩ | Measurement temp 25℃, rated voltage, charging 2min | 4 | ||
| Q / dissipation factor | Q | 1000 | - | Measurement temp 25℃, 1.0+/-0.1MHz, 0.5 to 5.0Vrms | 4 | ||
| Solderability (terminations soldered) | 95 | % | Sn-3.0Ag-0.5Cu at 245+/-5℃, 5+0/-0.5s; after 155℃ 4h pre-treatment | 4 | |||
| Reflow peak temperature (lead-free) | 240 | 260 | ℃ | Lead-free solder Sn-3.0Ag-0.5Cu reflow, air or N2 | 16 | ||
| Reflow temperature differential (GC□15 series) | ΔT | 190 | ℃ | Standard reflow conditions, GC□ 03/15/18/21/31 series | 16 | ||
| Chip length L | L | -0.05 | 1 | 0.05 | mm | Dimension 1.0+/-0.05 mm (1005M / 0402 chip) | 1 |
| Chip width W | W | -0.05 | 0.5 | 0.05 | mm | Dimension 0.5+/-0.05 mm | 1 |
| Chip thickness T | T | -0.05 | 0.5 | 0.05 | mm | Dimension 0.5+/-0.05 mm | 1 |
| Terminal width e | e | 0.15 | 0.35 | mm | Dimension e, 0.15 to 0.35 mm | 1 | |
| Terminal dimension g | g | 0.3 | mm | Dimension g, 0.3 mm min. | 1 | ||
| Rated capacitance | C | 200 | pF | 25℃, 1.0+/-0.1MHz, 0.5 to 5.0Vrms | 1 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Capacitance or Capacitance Change Capacitance:Within the specified initial value. Kind of Solder Sn-3.0Ag-0.5Cu(Lead Free Solder) Q or D.F. Within the specified initial value. Test Temperature 260+/-5 | 3 |
CAD (KiCad official)
- Symbol:
GCM1555C1H201FA16D - Footprint:
Capacitor_SMD:C_0402_1005Metric - 3D model: 0402 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MURATA ELECTRONICS datasheet (31 pp, sha256
9b8b196217996694, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).