main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers gc8872: viewers · Ray
gc8872-etched.glb Publish 0.1.0 · Ray
gc8872-etched.step gc8872: factory component page (tier=lcsc) · Ray
gc8872-hero.glb gc8872: hero GLB from the etched model (keeps the MPN mark) · Ray
gc8872-hero.overlay.json Publish 0.1.0 · Ray
gc8872.glb Publish 0.1.0 · Ray
gc8872.kicad_mod Publish 0.1.0 · Ray
gc8872.kicad_sym Publish 0.1.0 · Ray
gc8872.lbr Publish 0.1.0 · Ray
gc8872.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 9 pins · Ray

GC8872

SX-globalchip · Brushed DC Motor Drivers · ESOP-8

GC8872 from SX-globalchip, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground pin of the device (地).
2 IN2 input Logic input 2 controlling the H-bridge; a logic low input voltage is at most 0.5 V and a logic high input voltage is at least 2.5 V, with 300 mV hysteresis.
3 IN1 input Logic input 1 controlling the H-bridge; a logic low input voltage is at most 0.5 V and a logic high input voltage is at least 2.5 V, with 300 mV hysteresis.
4 nFAULT output Open-drain fault output that requires an external pull-up resistor and is pulled low internally during overcurrent, overtemperature, or undervoltage conditions.
5 VM power_in Motor supply pin with an operating range of 6.5 V to 45 V and an undervoltage lockout threshold of 6.1 V to 6.4 V.
6 OUT1 output H-bridge output 1, which drives the motor with a peak current of up to ±3.6 A.
7 ISEN passive Current-sense pin connected to the sense resistor to ground; if current limiting is not needed, it is connected directly to ground.
8 OUT2 output H-bridge output 2, which drives the motor with a peak current of up to ±3.6 A.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer SX-globalchip
Package ESOP-8
Category Motor Driver ICs
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
负载电源 VM 6.5 45 V 4
输出电流 IOUT 0 3.6 A 每通道 4
外部 PWM 频率 fPWM 0 100 kHZ 4
工作温度 Ta -40 125 ℃ 4
VM 工作电流 IVM 3 10 mA VM=12V 4
VM 休眠工作电流 IVMsleep 10 uA VM=12V 4
开启时间 Ton 40 50 us VM > VUVLO with IN1 or IN2 high 4
导通电阻 Rdsup Rdsup 300 340 mΩ VM=24V, Io=1A;T=25° 4
导通电阻 Rdsdown Rdsdown 260 320 mΩ VM=24V, Io=1A;T=25° 4
输出死区时间 tDEAD 220 ns 4
关断态漏电流 IOFF -10 10 uA Vout=0V 4
逻辑低输入电压 VIL 0.5 V INx 4
逻辑高输入电压 VIH 2.5 V INx 4
输入逻辑迟滞 VHY 300 mV INx 4
逻辑低输入电流 IIL -5 5 uA Vinx=0 4
逻辑高输入电流 IIH 10 uA Vinx=3.3V,INx 脚 4
下拉电阻 Rpd 300 kΩ INx 4
过温保护 TSD 155 170 180 ℃ 温度上升 4
过温保护迟滞 ΔTSD 40 ℃ 4
欠压保护 VUVLO 6.1 6.4 V 电源 VM 4
欠压保护迟滞 ΔVUVLO 0.17 V 电源 VM 4
过流保护 IOCP 3.7 4.5 6.4 A 4
过流保护迟滞时间 TDEG 1.5 us 过流保护迟滞时间 4
过流保护恢复时间 Tretry 3 ms 过流保护恢复时间 4
电源电压 VM 6.5 45 V 3
VREF 输入电压范围 VREF 0.3 5 V 3
逻辑输入电压范围 Vi 0 5.5 V 3
驱动峰值电流 Imax -3.6 3.6 A 3
结温 Tjmax -40 150 ℃ 3
存储温度 Tstg -60 150 ℃ 3
静电保护(人体模式) ESD -5000 5000 V 人体模式 3

CAD (KiCad official)

  • Symbol: GC8872
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm
  • 3D model: ESOP-8 (KiCad packages3D, STEP)
  • 3D model files: gc8872-etched.step / gc8872-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gc8872.step / gc8872.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SX-globalchip datasheet (11 pp, sha256 48b7973516199d7c, retrieved 2026-11-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF