main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs gc26l31p: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers gc26l31p: viewers · Ray
gc26l31p-etched.fit.json gc26l31p: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
gc26l31p-etched.glb gc26l31p: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
gc26l31p-etched.step gc26l31p: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
gc26l31p.glb Publish 0.1.0 · Ray
gc26l31p.kicad_mod Publish 0.1.0 · Ray
gc26l31p.kicad_sym Publish 0.1.0 · Ray
gc26l31p.lbr Publish 0.1.0 · Ray
gc26l31p.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json gc26l31p: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
README.md gc26l31p: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

GC26L31P

SX globalchip · LVDS ICs · TSSOP-16

GC26L31P from SX globalchip, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1A input Channel 1 driver input (TTL-compatible). VIH >= 2V, VIL <= 0.8V. Drives complementary outputs 1Y (non-inverting) and 1Z (inverting).
2 1Y tri_state Channel 1 driver Y output (non-inverting side of differential pair). VOH >= 2.5V at IOH = -20 mA, VOL <= 0.5V at IOL = 20 mA. High-Z when disabled.
3 1Z tri_state Channel 1 driver Z output (inverting side of differential pair). VOH >= 2.5V at IOH = -20 mA, VOL <= 0.5V at IOL = 20 mA. High-Z when disabled.
4 G input Active-high enable for all four drivers. When G = H (or GN = L), outputs are active; when G = L and GN = H, outputs are High-Z.
5 2Z tri_state Channel 2 driver Z output (inverting side of differential pair). VOH >= 2.5V at IOH = -20 mA, VOL <= 0.5V at IOL = 20 mA. High-Z when disabled.
6 2Y tri_state Channel 2 driver Y output (non-inverting side of differential pair). VOH >= 2.5V at IOH = -20 mA, VOL <= 0.5V at IOL = 20 mA. High-Z when disabled.
7 2A input Channel 2 driver input (TTL-compatible). VIH >= 2V, VIL <= 0.8V. Drives complementary outputs 2Y (non-inverting) and 2Z (inverting).
8 GND power_in Ground / 0V reference for logic and output stages.
9 3A input Channel 3 driver input (TTL-compatible). VIH >= 2V, VIL <= 0.8V. Drives complementary outputs 3Y (non-inverting) and 3Z (inverting).
10 3Y tri_state Channel 3 driver Y output (non-inverting side of differential pair). VOH >= 2.5V at IOH = -20 mA, VOL <= 0.5V at IOL = 20 mA. High-Z when disabled.
11 3Z tri_state Channel 3 driver Z output (inverting side of differential pair). VOH >= 2.5V at IOH = -20 mA, VOL <= 0.5V at IOL = 20 mA. High-Z when disabled.
12 GN input Active-low enable for all four drivers (complement of G). Outputs are High-Z only when G = L and GN = H.
13 4Z tri_state Channel 4 driver Z output (inverting side of differential pair). VOH >= 2.5V at IOH = -20 mA, VOL <= 0.5V at IOL = 20 mA. High-Z when disabled.
14 4Y tri_state Channel 4 driver Y output (non-inverting side of differential pair). VOH >= 2.5V at IOH = -20 mA, VOL <= 0.5V at IOL = 20 mA. High-Z when disabled.
15 4A input Channel 4 driver input (TTL-compatible). VIH >= 2V, VIL <= 0.8V. Drives complementary outputs 4Y (non-inverting) and 4Z (inverting).
16 VCC power_in Positive supply, 4.75V to 5.25V (5V nominal). Typical supply current Icc = 32 mA (80 mA max) with outputs disabled.

Key specifications

Parameter Value
Manufacturer SX globalchip
Package TSSOP-16
Category Interface
Pins 16

Ordering variants

Same part, different packaging or reel option.

  • GC26L31PP
  • GC26L31PS

CAD (KiCad official)

  • Symbol: GC26L31P
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: gc26l31p-etched.step / gc26l31p-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gc26l31p.step / gc26l31p.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
gc26l31p.step 205 KB You want the bare part, or you mark your own boards.
gc26l31p-etched.step 2.2 MB You want the part with GC26L31P already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 545 faces against 255 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SX globalchip datasheet (10 pp, sha256 fa2f5e0cf7c0776e, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF